How to fix flashing screen on iphone 5...

it keep on flashing till the screen become black and it become some kind of static... how can i fix this..please help

Sounds like a hardware issue to me but the standard troubleshooting is...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

Similar Messages

  • HT4061 how to fix black screen on iphone 5

    how to fix black screen on iphone 5 , can someone answer me , please !?

    To solve most of iPhone os problems you can perform a soft reset which will not change anything inside the phone
    It'll simply remove the errors
    To do that
    1.Hold power button for 5 seconds
    2.without releasing power button press home button and keep both pressed till the apple logo comes up
    3.Now release both buttons
    Your phone has now been reset

  • How to fix blue screen on iphone 5s ???????????

    after put blue screen willbe rstart

    Hi bossallouchi,
    I apologize, I'm a bit unclear on the current status of your issue. If you are having issues with your iPhone and are now seeing an icon instructing you to connect to iTunes (Recovery Mode), you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • How to fix blue screen on iphone 5s on ios 7.1.1

    my iphone go to recover mode after blue screen

    Hi bossallouchi,
    I apologize, I'm a bit unclear on the current status of your issue. If you are having issues with your iPhone and are now seeing an icon instructing you to connect to iTunes (Recovery Mode), you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • HT1366 How to fix Flashing Folder with Question Mark on Mac

    How to fix Flashing Folder with Question Mark on Mac

    RichardEL is probably correct.  I’ll go through your questions.
    > there is no Mac OS partition, I assume it would be directly underneath the HD on the left?
    I have not seen this particular condition where the hardware disk icon appears but the system volume that is supposed to be below it does not.  The System Disk partition would be below the HD icon indented to the right.  It is usually called “Macintosh HD” unless you renamed it.
    > when I go into disk utility my HD appears on the left, but I can repair or verify it
    Odd.  It appears but you cannot manipulate it with Disk Utility.
    > The S.M.A.R.T status reads verified
    If it did not say Verified then it would indicate a problem.  Saying Verified does not rule out problems but I think it indicates it is still breathing.
    > Is the HD deceased?
    If you booted the Recovery Partition (Boot, Command-R), which it sounds like you did, then at least part of the disk is still breathing.  If it took a long time to boot then that may have been a Network Recovery boot which would indicate the disk is very sick or dead.
    >  [If I] restore from time machine [will] everything will be back as it was before?
    Yes.  That is the beauty of Time Machine.  All your data, applications, and system preferences will be as they were as of the last backup.
    > I was thinking of erasing the HD, would this be of any help or do I just need a new one?
    Given what you reported from the Disk Utility steps you took it is unclear to me if there will be a way to repair the current volume, if you can erase and install from scratch or if you need a new disk.  Before proceeding it may be useful to have an expert at an Apple store look at it for you.  They may be able to revive it without a clean install or new disk.
    As was the case above, it could be a good disk with a bad cable in which case a new disk is not going to help.  To test this you can purchase an inexpensive external enclosure, remove the internal disk, place it in the enclosure, plug it in and then use Boot-Option to attempt to boot from the now external disk.  Here are links to the screwdrivers and enclosure you would need.
    $5 Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
    $22 USB 3.0 enclosure: http://eshop.macsales.com/item/OWC/ES2.5BU3W/
    If you attempt a clean install, use the Partition tab to repartition the disk, selecting one partition and with “Options…” electing a GUID partition.  Then use the Erase tab, select “Security Options…” and set it to write a single pass of zeros.  This will write to every sector to map out bad blocks.  (If you have an SSD do not write a pass of zeros.)
    If you do need to replace it I recommend an new inexpensive (~$100) and super-fast hybrid SSHD drive that has an 8 GB SSD cache that makes the data fly.  Google “Seagate 1 TB hybrid SSHD”.

  • How ti fix black screen on i phone 3gs?

    how to fix black screen on i phone 3gs

    I suspected that. Well, sorry the forum forbids helping you in any way. You have to google for help. 

  • HT4061 how to fix black screen. Phone still rings.

    how to fix black screen. Phone still rings.

    Hello TaQuilla,
    If nothing ever shows on the screen when you start it, or anything you may need to reset the phone, or restore the software. Try this first:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that does not get the screen going, then backup your device, and restore it.
    iOS: How to back up
    http://support.apple.com/kb/ht1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    All the best,
    Sterling

  • TS1424 how to fix error 21 my iphone doesnt work what should i do????

    how to fix error 21 my iphone doesnt work what should i do????

    Hello,
    I found this article that should help you out:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    It says the following about Error 21:
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
    Hope that helps,
    David

  • How to fix white screen of death on iPod 4g after screen replacement?

    How to fix white screen of death on iPod 4g after screen replacement?

    I would try to reset it before anything else.  To do this press and hold the home and power buttons until the the white screen shows the apple logo (~ 15 secs.).
    If this does not work then more than likely the LCD is damaged.
    btw- The white screen is common after repairs.  The reset fix works 90% of the time.
    iRefresh ltd.
    http://www.ipodrefresh.com

  • How to fix grey screen and spinning spiral on MacBook pro

    How to fix grey screen and spinning spiral on MacBook Pro

    The method described above is too complex.
    I found a more easy way to solve the Modern app crash problem.
    That is to download the legacy driver 296.10 here
    http://www.geforce.com/drivers/beta-legacy
    Unfortunately, 296.10 and 19x don't solve all problems on Windows 8:
    https://discussions.apple.com/thread/4370420

  • HT201210 How to fix error 2001 in iphone 3gs?

    I was charging (with an after market car charger) my 3gs when out of the blues it turned off. When it rebooted it appeared in DFU mode.  When I was able, I connected it to my MBP running on Snow Leopard, once again the DFU mode appeared. iTunes detected that the iphone was in recovery mode and that it had to be restored.  I downloaded the latest version of IOS and proceeded to restore the iphone.  After iTunes extracted the IOS software and was preparing the iphone for restore, the screen went white and then rebooted and gives methe error:
    The iphone “iphone” could not be restored.  An unknown error has occurred (2001).
    I have tried updating iTunes, rebooting my MBP, updating IOS but nothing has worked. I feel frustrated.  If some one has encountered and has been able to successfully resolve this problem please let me know how to fix it.
    Thanks in advance.

    Check this support document http://support.apple.com/kb/ts1275 and read this
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.

  • TS3694 how to fix 1015 error in iphone 3g

    Hello,
    Can anyone tell me how to fix 1015 error? I'm using an Iphone 3g
    thank you

    Type "1015" into the search bar at the top of this page by Support and read the resulting help articles.

  • You have any idea how to fix an accelerometer in iphone 4 void of warranty?

    do you have an idea how to fix the accelerometer in an iphone 4? (the warranty is void)

    Check your local CraigsList. There are often many people claiming they will repair iPhones at lower prices than Apple will charge. But you get what you pay for; you're better off going to Apple and getting it repaired by them, even though you're out of AppleCare and will have to pay for it.
    Did you jailbreak your iPhone? If that's what has disabled your accelerometer, you might be able to "repair" it yourself. Do a Google search on "iphone 4 accelerometer repair" for videos and instructions.

  • How to fix green screen blotches on teeth in imovie 10.0.7

    There are green blotches on the individual's teeth from the green screen used.  I need to know how to fix in imovie 10.0.7.

    "Did you have spinach for dinner?" ... SCNR!
    And such a nice smile, 'priceless' and most probably not to be re-done, right?
    sorry, to say, but that reaches the limits of lil' iMovie.
    You can not manually adjust the color-key in iMovie, as you can do in FCPX, nor does it offer any 'masking' features as Motion would...
    .. FCPX offers a 30d free and fully functional (no watermarks etc) trial ... but then you have to learn how to handle color-key in that pro app ... which is not a beginners task ...

  • How to stop Flash Screen?

    Hello!!
    I have a JSP page which has iFrame.
    <iframe src="test.jsp" name="printframe" width="0%" height="0%" onLoad="abc();" > </iframe>I am generating PDF content in the iFrame and I am able to do that successfully.
    But the problem is, whenever I generate PDF content in page, Flash Screen of Adobe Acrobat Reader appears.
    How to stop that Flash Screen?
    Reg,
    Chetan Parekh

    <%
    response.setSarcasm(true);
    %>
    You write a nice letter to Adobe and you say:
    "Please, would you remove your splash screen so that when I load my PDF file, the user doesn't know it's really using your software. I realize that you provide this PDF reader software free of charge to anyone who wants it, and that I have no right to ask you to hide your identity from the users of said software, but please please please please please?!?"
    I'm sure they'll listen and release a new version just for you.
    <%
    response.setSarcasm(false);
    %>
    In other words, you can't, and you shouldn't be able to so just forget about it. It only shows the first time a PDF file is loaded in the browser session anyway.

Maybe you are looking for

  • How can I display records quickly in order, using set_block_property

    Hi all, I want to display records in order when I click on button corresponding to that filed.I'm getting result by using set_block_property..but it is displaying records slowly,if number of records are more then it's taking more time to sort the rec

  • Error in creating new layout controller.

    I have decompile the SimpleLayoutController, and duplicate the class and rename to TestLayoutController. Here is how I do it (I follow the KMC Developer Guide): 1) Create new portal application struture. 2) Create java class: TestLayoutController in

  • How Can You Change the Look and Feel of Charts in OBIEE 11g

    How Can You Change the Look and Feel of Charts in OBIEE 11g? Edited by: user11973122 on Jul 18, 2012 12:13 AM

  • Urgent ......Problem........Error RSAR 374, RSAR 375

    Hi all, Hoping you can help me with this issue. I have two systems,one R/3 4.7 system and another BW 3.0B system.Both are recently installed. created user in client 800 on R/3. created user in client 100 on BW. i established RFC destination between b

  • Issues in using KM APIs in Webdynpro

    we have an issue. We have an application written in servlets to retrieve KM attributes. We are now trying to embed it with webdynpro. We just extracted what we require from servlet code and used it in WebDynpro. But from the errors it is showing what