How to fix fuser in ImageClass Cannon printer D420

My Canon Imageclass D420 has the error E000.  Does anyone know how to fix this?

The meaning of "Support Code 300" is known only to Canon, but there are reports of at least temporary relief from taking one or more of the following steps. Some may not be applicable in your case.
         Open the printer cover to check the ink cartridges, then power the printer off and back on.
         Turn Wi-Fi off and back on in the menu bar.
         Delete and recreate the print queue in the Print & Scan preference pane.
         Disconnect the power cable and reconnect it after a minute or so.
         Reset the printer to factory condition, restart the wireless router, and repeat the network setup.
If none of these procedures works for you, I suggest you contact Canon tech support.

Similar Messages

  • HT1338 how to install all in one cannon printer

    how to install all in one cannon printer

    I had exactly the same problem with Windows 7 64-bit and HP Photosmart 2610xi. All you need to do is right click on the installation program, go to properties, go to compatibility mode, select Windows Vista SP2 and optionally check run as administrator. It worked after that.

  • HT4356 How to connect  ipad2 to wireless cannon printer MX432 which also used by a dell computer

    I just bought cannon mx432. I was able to set up my dell laptop but I'm unable to setup my ipad 2 . Could somebody please help . Would be much appreciated. Thanks

    First check to see if its in the list of airprint enabled printers then folow instructions in article. If its not, then there are other options.
    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
    Print from iOS device to virtually any printer
    http://www.lantronix.com/it-management/xprintserver/xprintserver.html

  • How to fix missing entries in the printing preferences of Adobe PDF

    Hi all,
    we are on Acrobat Pro 8 (8.16) as part of the CS3 Design Standard package.
    A colleague of mine is missing some of the entries in the printing preferences of the Adobe PDF printer:
    The Adobe PDF Security dropdown is empty and he can't set the Printer to ask him where to put the final pdf files ("Prompt for Adobe PDF filename").
    I already tried repairing Acrobat - didn't help.
    Has anyone some ideas what to do?
    Many thanks,
    Mike

    This is getting nasty:
    After reinstalling Acrobat (via the add CS3 components function in "add or remove software") it wants to be activated (!?!) and doesn't accept the CS3 key any more.
    So I will probably have to reinstall the whole CS3.
    Is there any way to make sure that every trace of the old installation gets deleted before I start?

  • When I try to print an jpeg or png from Photoshop all it does is convert the image to a PDF & plop it on my desktop- it won't print the image. Any suggestions as to how to fix this?

    When I try to print an jpeg or png from Photoshop all it does is convert the image to a PDF & plop it on my desktop- it won't print the image. Any suggestions as to how to fix this?

    Yes, the printer is on, it’s selected in Printer Set-Up & I’ve never had this problem before. It’s definitely a Photoshop issue as every other type of file prints fine. I’ve uninstalled Pshop & am now reinstalling. Hope that will do the trick.

  • I wanted to print with my Cannon printer but it displayed an error message B200. How do I fix it?

    Yesterday I wanted to print a text with my printer, but it I was getting the error code b200. What's the problem? How to fix it, any help will be appreciated!

    what model?
    how many times does it flash orange when you power up?  or do you get a green light?
    have you upluged at the wall, then left it to sit for a few hours (so with no mains cable in)?
    this apparenntly resets it

  • How to fix the E225 error on the MF 4380 dn printer

    How to fix the E225 error on the MF 4380 dn printer

    Hi okekeP,
    The imageCLASS MF4380dn was not released by Canon USA in the United States, but was distributed in other markets such as Canada, Europe and Australia.  I would recommend to referring to the Canon support group for your geographical area to ensure the proper support application is being used for your product. However. I will be happy to offer some assistance.
    The closest US model would be the imageCLASS MF4370dn. The recommendation when the error occurs with this model is to perform a reset the product.  If you have not done so already, please attempt to reset your laser printer as outlined below:
    1. Disconnect the power cord attached to your machine while "on" for up to 10 minutes.
    2. Reconnect the power cord for the unit and plug it into a different known working outlet direct to the wall (not a surge/power strip) to ensure it is receiving full power.
    4. Once your unit has initialized, confirm an error is not displayed in the LCD.
    If unresolved, please refer to your Canon support contacts for further assistance and whether a firmware update may be available to address the issue or if service may be required.
    In case helpful to you, here are direct links to the product page for your laser product:
    - if your product was purchased in Canada, you can visit the product page for your laser device on the Canon-Canada website, www.canon.ca.
    - if your product was purchased in Australia, you can visit the Canon-Australia website, www.canon.au.
    - if purchased in Europe, you can visit the Canon-Europa website, www.canon-europe.com
    I hope this is helpful to you.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Any ideas how to fix my mac book pro to canon pixma mp640 printer connection?

    Anyone have any ideas how to fix my mac book pro to canon pimxa mp640 printer link? The two are connected manually yet the ! remains on the 'print' page next to the printer name. it was working fine until i changed the ink cartridges. Without the wireless password - which I've never had and don't supposedly need as it's not a wireless connection, I am being prevented from resuming printing.

    If it's on a windows network you have to enter your (windows) log in (name/password) credentials.
    This should be a 1 time event. It will remember it thereafter.

  • I updated my Mac Book Pro to Yosemite, now to says it's not compatible with my Cannon copier. Any idea how to fix this problem?

    I updated my Mac Book Pro to Yosemite, now it says it's not compatible with my Cannon copier. Any ideas how to fix this problem so I can use my Cannon copier again?  Thanks for any help!

    If MF4150 is correct...
    http://www.usa.canon.com/cusa/home
    search MF4150
    click >Drivers & Software
    Verify or choose Yosemite 10.10 - then click the [+]
    Again verify Yosemite > click agree > click [DOWNLOAD]
    The rest should be self-explanatory
    ÇÇÇ

  • How to fix OXC19A0020 error in printer HP6500A plus, just as faxing and copying machine.

    I have just bought a printer HP6500A plus, which I use it as faxing and copying machine only. Therefore, I never connect it to a computer. After I installed the machine, it worked for the very first time. Then, I changed the new carbridge. It did not work anymore indicating error code OXC19A0020. I shut off the power and examined all the carbridge insertions. Everything seems OK, but the code still appear and not working. Pls advise how to fix this new machine. Tks

    Hi Rayraylam03,
    If your problem is still unsolved, you can try these solutions:
    http://fix-your-printer.blogspot.com/2011/01/solving-error-code-oxc19a0036-on-hp.html
    Good luck !

  • Printing on Firefox is not working properly. prints only on the upper left of the page going through the printer! How to fix this???

    printing should come out on the entire page I am trying to print on but it is not. What should be printed on one page is broken into four or five pieces and printed on multiple pages, wasting paper and the font is really small. No idea how to fix this or any formatting problem in MOZILLA.

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page

  • Each time I connect to my IBM computer it crashes with blue screen error message pops up. Apple say that it's my printer/camera drivers. The problem is with iTunes, it likes to play with all the ports on my comp and conflicts with prnt drivers. How to fix

    Does anyone know how to fix this problem without disabling my printer. It's very frustrating. It's either I have my iPad or my printer. iTunes likes to play with the ports on my computer thereby causing a conflict with my printer drivers. Apple should fix this problem, I'm so annoyed.

    When this problem first happened, I searched for threads and found a few.  See be;ow links:
    http://support.apple.com/kb/TS1502
    Apple say that its a driver problem, but I've never had this problem before so I am not convinced. Another thread, which I can't seem to find, suggests that it is an apple problem - itunes plays with the ports on the company causing conflicts with existing drivers. I isolated the conflict to my new Samsung printer. I uninstalled the Samsung printer driver and then can successfully connect my ipad without the blue screen appearing.
    It's not a windows problem. Windows is working fine. Only happens when Ipad is connected. Actually, this first happened after I installed the new version of itunes. I reget installing the new itunes version, but don't know how to reinstall the previous itunes version.

  • Can't print from Adobe Acrobat 11.0.07 on my MAC OS 10.6 to HP PSC 1350.  Error: PSTOPDFFILTER/PSTOCUPSRASTER FAILED WITH ERR NUMBER 13.  How do I fix it so I can print?

    Can't print from Adobe Acrobat 11.0.07 on my MAC OS 10.6 to HP PSC 1350.  Error: PSTOPDFFILTER/PSTOCUPSRASTER FAILED WITH ERR NUMBER 13.  How do I fix it so I can print?

    i am getting the same error, suddenly, on 10.9.5

  • My mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

    my mac keeps freezing when i try and print anything from preview. any ideas as to what the issue is or how to fix it?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • I have Acrobat 9 Pro and when I print hard copies of my PDF letters drop off from sentences throughout the document. Any idea why and how to fix this problem?

    I have Acrobat 9 Pro and when I print hard copies of my PDF letters drop off from sentences throughout the document. Any idea why and how to fix this problem?

    Hi,
    We’re using Windows 7 Professional, Service Pack 1 and system type is 32-bit operating system.
    Ange

Maybe you are looking for

  • Play video from external HD to Apple TV

    I would like to play videos from an external drive to the Apple TV. The workarounds I've seen all involve moving the entire iTunes library to the external drive. I want to keep all my music on the internal HD but the videos on the external HD. Sugges

  • Trying to install... it says i need to be adobe administrator

    how do i install the photo elements 13 when it tells me i need to be an administrator

  • Firefox crashes on start, even after complete reinstallation. No add-ons.

    Every time I open FF, it completely freezes within 5 seconds. I've uninstalled & reinstalled, I've removed FF & all traces of its data using Revo uninstaller, then reinstalled, and still get the same results. I've seen where malware could cause this

  • Network in Finder not displaying networks.

    Hey, I seem to have developed a problem with Network in my Finder. Restarting does not seem to rectify it nor does removing the icon and replacing it. Basically when I click on network in the finder (or even via the go menu), instead of being shown t

  • Website Not Displaying Properly In IE, Windows 7

    My first Muse created website is at http://gordonsportfolio.businesscatalyst.com where it displays as designed in Firefox, Safari, iPad, and iPhone. Using a friend's Windows 7 laptop, however, it does not display as designed and, in fact, is missing