How to fix iMac g5 - 17" overheating problem

Hi,
I have an iMac G5 (17") which seems to be overheating. The fans turn-on about 10-15 min after start-up. Occasionally, the machine will go to sleep. Not the usual sleep-mode but a sleep mode in which all processes seem to stop.
If I place the machine near an open window with a stream of cool air all the sysmptoms disappear so I feel overheating is a reasonable diagnosis.
Any ideas about fixing this ?

I have had the random shut down problem for months, however, thing were fine for 2.5 years previously. I have an Imac G5 made in June 2005, and I believe my problem was due to over heating. I finally discovered this...there is a "?program?" in your imac called the SMU, the System Management Unit. The SMU controls everything electrical in your computer, all power routing. You can reset the SMU in my computer by unplugging all cables from the computer and then removing the power plug in the back for ten seconds or so and then when you plug the power cord back in, simultaneously hold down the start up button. Once plugged in let go of the start up button. Plug back in your other cables and hit the start button again. Since doing this the computer has worked properly under stress for the past 72 hours, ie., internet always on, all programs opened, repeated sleep/wake cycles, etc. I believe that a fan or fans were not working for whatever reason, and that the machine overheated and shut itself off, and that by resetting the SMU it put the cooling system back on track. You can find out more about resetting the SMU at http://support.apple.com/kb/HT1767 You can probably find a way to similar info for your imac if not like mine from that site. Of course, as soon as I send this the ** thing will shut down....hahahaha. The worst thing about this is the complete and total silence from Apple, and it will be quite sometime before I buy another Imac. Good luck.

Similar Messages

  • How to fix sometimes out of limit problem of SCE8000 and how client can out of its limit

    how to fix sometimes out of limit problem of SCE8000 and how client can out of its limit?
    how to debug this?

    bump

  • Does anyone know how to email apple re a overheating problem on a third generation ipod

      Does anyone know how to email apple re an overheating problem on a third generation ipod nano

    You don't email them.
    If you click on the Contact Us link at the bottom of this page, and every page at Apple for that matter, you would find a section that looks like this:
    Phone
    Use Express Lane to contact an expert at Apple Support for personalized and convenient support.
    Mac, iPhone, iPod and iPad customers within 90 days of ownership are eligible for complimentary phone support — one support incident per iPod and unlimited incidents per Mac, iPhone and iPad. Online technical support for Apple products is available beyond the initial 90 days.
    U.S. iPod, Mac and iPad technical support:
    (800) APL-CARE (800-275-2273)
    U.S. iPhone technical support:
    (800) MY-IPHONE (800-694-7466)
    Canada technical support:
    (800) 263-3394
    See all worldwide support telephone numbers

  • How to fix the stuck in headphone problem

    How to fix the stuck in headphone problem?

    First try a reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
    If not try this:
    Settings > General > Reset > Reset All Settings

  • How to fix OS X Yosemite installation Problem? When the unit is rebooting the apple logo shows up then it is replaced by a cancel symbol? please help what to do?

    How to fix OS X Yosemite installation Problem?
    When the unit is rebooting the apple logo shows up then it is replaced by a cancel symbol?
    Please help what to do?

    Do you mean a circle with a slash through it?
    If so, the drive doesn’t have or can’t find the necessary startup files.
    Boot into Recovery and reinstall.

  • How to Fix the iPhone 4S Wifi Problems After  8.2

    How to Fix the iPhone 4S Wifi Problems After  8 2 its grayed out

    I suggest you describe the problem in more detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received. Telling us you've tried ""all the methods mentioned in the forums" does not help.

  • How to fix Imac 8.1 on Windows black screen problem?

    Firstly when I originally got this machine it seemed (about 4 years ago), sometimes had my Pc forget the keys shortcuts for the Mac)
    Anyway over the last year I have the problem where I'd be in the middle of doing something on the Windows side then randomly go black. Strangely this doesn't effect the Mac side on my Boot Camp.
    After some testing on the Windows side I noticed this screen doesn't force the black screen when I'm either watching a video using 'Media player' or playing a game like 'STO' or 'KOTOR'. Also I wouldn't mind the black screen if it was temp but the thing is it stays black until I hard-reset the Imac.
    Anyway does anyone have any idea's on how to fix this? It's been a problem for the Windows side for a while, haven't had much luck trying to fix the issue so the video playing 'idea' was always a temp solution till I can find a way to fix the issue. (The problems exists on both Windows 7/8 but now using windows 8 again because had to replace my broken hard drive recently).

    solved

  • How To Fix Slow Youtube Youtube Bufferring problem.

    Recently youtube online streaming video is running very slow even in 240p,what is the problem.I am currently using latest adobe flash player 11.6.602.180 with Google Chrome Browser.My bandwith is 4mpbs,how to fix slow video buffering,need help.

    I'm having the same buffering problems with ver 11.6.602.180.
    Just tried again during the same time of day.
    Backed-out back to 11.6.602.171 and the problem no longer seems to exist.
    I running Vista Home Premium SP2  32-bit  on an HP Pavilion dv6500 notebook w/ 2 GB RAM.
    AMD Athlon 64 X2 Dual core processor TK-55 1.80 GHz
    Firefox browser 19.0.2

  • Badly need your help: How to fix my iphone 3gs restoration problem

    it's been for a month now that i could not use my iphone 3gs.  i encountered some problem which i have difficulty to fix or resolve the problem: Currently my iphone 3gs is in recovery mode (which it seems got stucked). When I plug my iphone to restore it via itunes the message appeared as follows: The iPhone"iPhone" could not be restored. An unknown error occurred (1).  I already tried to search the web but could not find any suggestion how to fix it.  If there's anymore that encountered the same problem, I highly appreciate if you could assist me step by step.  By the way, i bought my iphone 3gs "open or unlocked", so I don't jailbrake.  thanks.

    You could try to use another USB port, check your security software settings or see if you can restore on another computer.
    iTunes for Windows: Troubleshooting security software issues

  • How to fix "use itunes to restore" problem on my iPod Classic 160G?

    When I try to connect my iPod to iTunes on my PC, there was an alert to restore. I follow the direction. Stage 1 of the restore process was successful. But the Stage 2 of the restore process, when the iPod displays an Apple logo as well as a progress bar in off backlight work so long time. Then I shutdown my PC. After that my iPod does not work. When I re-connect to PC there are appear "use itunes to restore" and "do not disconnect" alternately.How to fix the problem?
    <Edited By Host>

    for some reason when itunes first installs a new version, it opens up to the iTunes Store. Since you don't have net connection, its going to error out.
    But the fact that you can't see any of the other items, I would recommend redownloading iTunes (and Quicktime to be sure) and reinstalling it and see if that helps.
    Just for the record, can you click on the Library icon?

  • More iMac sleep and overheating problems - any ideas?

    My iMac is about 2.5 years old now. It was working fine until the power supply had problems and was replaced under warranty. It then had could not mount DVDs or CDs and that was replaced under warranty, at the same time it was performing really, really slow, and then give me the spinning beachball for few hours straight before I had to turn off the machine by holding down the power button. The technician ignored that problem and I got my computer back partially fixed; the DVD drive was replaced and in his limited testing the computer did not lock up so he returned it to me.
    After a few days of use I then took the computer back again and he agreed the motherboard had to be replaced.
    While waiting for the motherboard to be replaced, I had extraordinary faith that my computer would come back in perfect working order: I ordered Leopard.
    Before upgrading to Leopard I decided to back everything up using SuperDuper so I could restore if I had problems with the upgrade. As a new father I have tons of photos and my son's iWeb page that I could not risk losing. My previous hardware issues made me act more prudently; I was lucky to have done that.
    Unfortunately the old motherboard was replaced with one that had more problems; after a few days of light use I upgraded to Leopard and was greeted with immediate kernel panics (grey screen of death). I restored from SuperDuper backup and tried again: same problem.
    Since I have lots of stuff on my system I decided to do a clean install: problem solved. I then started importing and consolidating my iPhoto libraries from my old G4 tower and my old "backup" system. The machine would overheat go to sleep after only importing a few photos or give me the spinning beach ball while typing in mail (when it was the only program open).
    After researching the situation one the internet I realized that many people have similar problems and I ended up installing "Temperature Monitor" to find out the temperature of my computer. The reported temperature of my computer is regularly hovering between 76 C - 85 C (169F - 185F). If the machine is idle the temperature is still very warm at 64 C (147F). I reset the SMU but that did not have an effect. I then found out the diagnostic test of the 4th LED that would turn on if the machine detected a heating problem. This test is intrinsically flawed since it can only be done with the case open so the heat can easily escape to the room (note both fans do work).
    I then took the machine in to serviced again. The problem would be easily solved if I lived in the United States or Canada, but I live in El Salvador. The only Apple Certified Technician (at least for warranty repairs that I know of) may be a little tired of trying to fix my computer (I can sympathize with him as I am tired of having it needing to be fixed).
    I dropped off the machine and 2 weeks later (I have learned to be patient for parts to come to this country) I called for an update. It turns out my computer is "fine". I went to pick it up and he performed the 4th LED test in an air conditioned room (with an open case obviously), copied a few files, opened some problems and it worked fine in his limited testing in an air conditioned building. He also said Leopard may have caused some problems.
    I have no faith in that computer right now so everything I do is on my 8 year old G4 "Gigabit Ethernet" tower. I have upgraded the CPU twice from 400 MHz to 800 MHz and then to 1.3 GHz over the years and put in 768 Mb of ram (as an aside I just ordered 512 Mb more ram as it is now my primary computer to edit video).
    I have videotaped the computer acting incredibly unresponsive and slow and am exporting it (currently 277 more minutes for 15 minute video) and overheating. It did not "sleep" when I had chance to tape it, may try again later (currently restoring 10.4.11 backup on iMac so technician cannot blame a clean install of Leopard).
    I called AppleCare and they were supportive with my problems and I hope to take in the computer again soon.
    Exasperated in El Salvador . . .

    Strongly suggest that you contact/call Customer Relations.
    Relay to them what you stated in your post. With all those repairs, you may be entitled to a new iMac.
    Sorry, I do not know the phone number of Customer Relations in your country. You may need to contact AppleCare & ask firmly & politely to be transferred to CR.
    Good luck!

  • How I fixed my Lion Internet Connectivity Problem

    I know that there is a 25+ page trail of questions on this.  I think I looked at every one but nothing worked.  I called apple care.  I got help fast.  We tried about 30 min worth of stuff.  They finally said bring it to a genius bar.   I did not want to go there.  So I kept playing with it.  But first my problem:
    I have 2 iphones, an ipad, and 2 macbook pros connected to an airport express.   All working very happily together.  Then I upgraded to lion on the two MBP's.  One of them continues to work.  The other, while it seems to connect to the airport will not connect to the internet on any browser or email software after it wakes from a sleep.  Cycling the wifi on the MBP fixes it till it goes to sleep.
    So I was beating my brains over this.   Then I thought...hey.... I can see my nieghbors wifi on a linksys router.  It works....I am on....go to sleep...wake...still works.  Hmmmmmm.
    So it dawned on me that the problem was something stored in the airport.   I did a factor reset.  Pull the power, depress the reset button, put the power back on, release the reset after 6 secs.   I then used my keychain utility, on the MBP, to eliminate any previous passwords for the router (not sure if that was needed).   I used airport utility to reconfigure the airport.  I used all my old names and passwords so I did not have to change the other devices.
    It WORKED!!!!
    I am not sure if this will work with other wireless routers but it might.
    Message was edited by: bob Keenan
    I spoke too soon...problem returned after closing laptop for a while.

    Hi Bob
    Just a thought for you. It will be interesting to see if it works. I have an MBP which upgraded fine. My iMac 27 initially showed the wake from sleep problem. Both go through the same router so that should not be the problem - logically. All I have done with the iMac was to repair permissions - probably three times and to re-start after. The iMac is now fine - apart from a couple of other unrelated problems, which again, did not appear with the MBP.
    Personally, if I have to start doing things in Terminal it is not my problem - I spent too long with DOS and Edlin to go back to that!
    Cheers
    TY

  • How to fix iMac slow login

    My 2009 iMac stuck at the login page and hungs there for ever, I usually power it off. How can I fix it?

    Safe Mode deletes system caches that may help ...
    Startup your Mac in Safe Mode
    A Safe Mode boot takes much longer than a normal boot so be patient.
    Once you are in Safe Mode, click the Apple  top left in your screen.
    From the drop down menu click: Restart

  • How I fixed my iPhone 2wire WiFi problems.

    Was having problems with my iPhone I got 2 weeks ago not being able to use the At&t 2wire 2701 router I got when I bought my phone. It would see and even say it connected to the router but when I would try to get on the internet or iTunes it would go back to the Egde network. I have been reading the topics on here and saw that alot of people are having the same problem. I was able to get it working. So thought it would be nice to let you all know how, maybe it might help some of you.
    1. forget the router address on your iPhone if you have it set up.
    2. go into the router at http://gateway.2wire.net
    3. click the "Home Network" button at the top (will ask for your password) you will see everything that is connected to the router.
    4. click on "wireless settings"
    5. might want to change the name of your network but thats up to you. The defualt channel is 1 so try changing to something else. Mine is at 8
    6. go down to the "wireless security" change to the "wpa2-psk"
    7. use a custom phrase password, they are harder to crack and I have read work better with iPhones
    8. go down to the bottom section to "additional setting" my setting are as followed
    Wireless mode 802.11b/g
    DTIM period 1
    Max connection rate 54mbps
    Power setting 10
    9. go the the bottom and press "Save"
    10. go to "advanced setting"
    11. go to the first section "Private Network" you are probably set you the default 192.168.XXXX change it to 172.16.xxx. Since this is the default means alot of people are probably using it so might be causing problems. <note by Host, not necessary, see Nathan's note below>
    12. go to the bottom and press "Save"
    13. exit browser and unplug the router for 1 min. Talked to a guy from 2wire and he said this sometimes helps when you change setting to reboot the router for the changes to becomes enforced by the router.
    14. go into setting > Wi-Fi on your iPhone and then choose your network and enter your password.
    Lets hope when you connect this time you stay connected. If this helps you please let me know. Anyway hope this helps

    THANKS!!! I got my phone for Christmas and have worked for 2 full days trying to get it to say connected to my 2wire. I called Apple support and they had me reset, restore and finally go to the Apple store to exchange my phone. I kept telling them I had read that this was a common problem but they seemed unfamiliar. When I got to the store, it logged on easily to their wireless network so I was told it wasn't the phone but probably something with my 2wire. They said maybe it wasn't compatible with the iphone. I came home and have worked another couple of hours when I found your post. IT WORKS LIKE A CHARM!!! Thanks again.

  • How to Fix iMac

    Ok so here's what happened. I installed Windows 7 64 bit on my brand new iMac (2011 with a mountain Lion) using Boot Camp Assistant. I followed all of the instructions and it worked fine (even Mountain Lion). So I wanted all of my files to be on it too so I booted from a Windows 7 Recovery cd and tried to restore my Windows 7 to an image back up from my external hard drive. Now for some reason. Windows 7 gets the blue screen of death and reboots my Mac every time I try to use it. Worse yet, my Mountain Lion OS is completely gone. I can only choose Windows. So I tried my friend OSX cd ( I believe it was Snow Lepoard) to re install it and I get this grey screen telling me to reboot and it will not work even when ai hold down C to boot from the disk. I bought it from Future Shop and it did not come with any restore CDs. So how can I get my copy of Mountain Lion back and run it like normal?

    EDIT: Now when it boots it the screen goes black and it says "No Operating System". It no longer recognizes the mouse and keyboard and even worse, someone else Snow Lepoard is stuck in the cd tray (because I. was trying to boot from it).

Maybe you are looking for

  • I installed firefox on a new Win 8 laptop, and my account can not sync with my Win 7 laptop.

    I recently purchased a new Win 8 laptop. When I installed firefox and go to sync in option, it doesn't give me the old 4x3 box with code. When I entered my email, it couldn't find my account either. I am not sure where is the problem, because my old

  • User decision step execution from UWL

    Hi,      I copied the standard user decision step and added my own text in that task. My requirement is i have to  execute that step from UWL . i need to configure this task in SWFVISU, so that it will appear in UWL.  My question is what  are the par

  • Need to populate PO Charge Account in PO Distributions Form

    Hi I am converting legacy PO's into Oracle 11.5.10. I need to populate PO Charge Account in PO Distributions Form in Purchase Order for every shipment which is on legacy PO line, which column in PO_DISTRIBUTIONS_INTERFACE table should be populated. I

  • Photoshop 7.0 installer problems

    I am trying to install my Photoshop 7.0 that I just purchased. When I click the Photoshop 7.0 icon, a window pops up titled "Adobe Photoshop" and reads "One or more files in the Adobe Application Support folder, necessary for running Photoshop under

  • My Computer Will not sleep

    I had this problem with my iMac 700 OS 10.3 and now it is happening with my new system. I will put my computer to sleep and in a very short time it will wake up. I have looked at some of the solutions that I tried a while back and none of them seem t