How to fix incorrect Senders? Am using gMail as my provider.

I've been using gmail's web client to access my email account. All is working fine.
I installed the latest version of Thunderbird for Windows 7 using the default settings. However, most of my email messages display the wrong sender. I don't see a common characteristic in the incorrector or correct senders.
I uninstalled and reinstalled Thunderbird. Nothing changed.
All remains working fine in the gmail web client.
Ideas?

you have the email address added to your address book with whatever name your seeing in Thunderbird.
Go to your address book and remove the entry and you will do much better I am sure. Many services like BLogger use the same email address for everyone and just modify the display name in the message.

Similar Messages

  • How to fix the financial table using script

    Hi All,
    How to fix the financial table using script, (for example see below table. i have fixed manually, my document having more than 50 tables)
    %, ) are hang aligned.
    $  are left aligned as like below.
    Regards,
    Velu

    Hi Velu
    The quality of your screenshot came out pretty bad
    Maybe send another higher resolution one which on a smaller part of the table and show the hidden characters

  • How do I download Adobe Acrobat using the Agreement Number provided by my employer.  Having difficulty connecting to Adobe Chat with Support option.

    How do I download Adobe Acrobat using the Agreement Number provided by my employer?  Having difficulty connecting to Adobe Chat with Support option.

    Hi,
    If you already have the serial number then I would request you to download the software from the below link and install it.
    http://www.adobe.com/downloads/other-downloads.html
    Regards,
    Anand

  • How to sync existing contacts/calendar using Gmail sync?

    Hi,
    The instructions are very straightforward for how to set up your iPhone, using the Exchange setup, with Gmail sync.
    Now that I am set up, all of my existing contacts and calendar events on the phone have not synced over to Gmail, and I can't figure out how to make it happen.
    Ideally, I'd like to sync my existing (now inactive) 3GS with Gmail, and then, sync my new iPhone 4 up to Gmail, thereby pulling the contacts and calendar events onto the phone as well.
    Any advice would be appreciated.
    Thanks.

    I have been there, but thanks just the same for the reply.
    I don't understand, but I don't know what else to do. When I made the connection, the mail synced from Gmail just fine. But the contacts and calendar have not left the phone, when I log into my Gmail account via the web, no contacts have copied there from the phone.
    Thanks anyways.

  • How do I send e-mail using gmail?

    How do I send an e-mail using gmail?

    Via your GMail account that you setup on your iPad.
    Or using webmail with a browser.

  • How to email attachment on ipad using gmail

    I can't figure out how to include an attachment with an email through gmail?
    Thanks

    I have a simple solution.
    From your browser, NOT an app. So in Safari, Chrome, Mozilla, Explorer.
    Go to drive.google.com and login, if you aren't already (be sure to use desktop format and not mobile)
    Choose the document you want to send and open it (this should direct you to docs)
    When you have your document open please click file in the upper left and scroll down to email as attachment
    There is a dropdown menu for "Attach As" where you may choose your file format
    Below that follow like any other email: To, Subject, Message
    Hit send, now you've attached and sent your file

  • How to fix choppy/wavy video using After Effects?

    Here's the video, just in case my explanation doesn't do justice, Shou.tv/aesthete18. It's the 21:03 minutes one (You can rotate video on top right corner)
    Some details on the video:
    The video on the site is recorded at 2mbps bitrate and 720p resolution. The max is 16mbps bitrate and 1080p resolution. Both have the same issues
    The problem:
    When the character is walking, the video seems to be wavy, you can see the screen is kinda moving to the right. It's really hard to watch and hurts the eyes after awhile. I'm not sure if this has to do with bitrate or anything but I doubt it as a friend of mine did it in 8mbps without any issues, he's was pretty smooth.
    What I'd like to know is, can it be fixed in AE? A friend of mine has AE CS4 but he doesn't know much about it. I'd be willing to learn, if you'd point me in the right direction, I can use his PC to edit.
    Keep in mind, I've only just seen the interface of AE and have no idea how anything works.

    The link is to a game play screen capture, which is upside down by the way, and it shows a lot of color and motion artifacts. The artifacts and frame rate problems have everything to do with your screen capture program and if they are in the original video there is not much you can do about it using AE or any other program. I can't stand to watch game play anyway. It even gives me a headache when the most games are running. I know recording your game play is popular with the gaming community but there has got to be a better way to capture it than the way you are doing.

  • How to fix the "Two computers using the same IP address" issue on the airport express

    I just bought an airport express and got dsl at my apartment, and I haven't been able to set up the wireless connection. My DSL works just fine but whenever I hook up the AX I get an error message saying that there are two computers using the same IP address on the network, but I only have one computer.
    I know this is probably a simple fix, but I've never had this issue when I set up the Extreme at my parents house and I haven't been able to find a thread on this.
    As of right now I have it set to Factory settings.
    Help please!

    This modem was designed to connect directly to a computer and you are trying to connect it to a router.
    Unfortunately, this is not a simple fix as both the modem and your AirPort Express will need to be configured differently to work together correctly.
    Connect the modem directly to your computer.
    Open up your browser and type the default IP address for the modem into the address bar. Check your documentation on the modem but it is likely 192.168.1.254
    That will bring up the configuration page for the modem.
    You may need to enter the modem access code which is on a label on the back or bottom of the device
    Look for an Advanced tab, then look for a tab labeled something like PPP Location
    Right now, you will see that "PPP is on the modem"
    Chance that to "PPP is on the computer or router"
    Click to save your new settings and the modem will restart
    If you ever need to get the modem back to its original settings, you will need to hold in the reset button on the back of the modem for 5-6 seconds and then enter in the default IP address to be able to access the settings on the modem
    Connect the modem to the AirPort Express with an Ethernet cable
    Open AirPort Utility on your Mac and click Continue to follow the guided setup to "Create a wireless network"
    You may be asked to "switch" networks when you do this. You want to switch
    Select the "Connect Using PPPoe" option when it appears
    Enter your user name and password with your provider. Leave the Service Name area blank. You want to always stay connected if you see that option
    Continue to follow the guided setup and Update to save settings
    Pull the power cord from the modem, wait a moment, then restart the modem
    Log on to the wireless network that you created during the setup and you should have an Internet connection

  • How to make sure that "hello" uses gmail to send the invites?

    I am trying to invite someone to join a hello conversation but hello uses applemail in stead of my preferred gmail

    hi klaus, please make sure that you have set gmail as preferred app to handle mailto:-links in the firefox options like it's described in [[Change the program used to open email links]]

  • How to fix partition table by use fdisk

    i installed vista with my os x.
    each time i boot into my vista the system shows "partition tablr not recognized" and then load some loaders from vista.
    there's also a message showing that " use windows fdisk" to fix the problem.
    i'm not good at computer. so please guide me step by step to solve the problem.
    thanks in advance.
    joh

    You should probably purchase a legitimate retail version of Windows Vista. The error comes from the BIOS emulation hack that bypasses the Vista activation function.
    It should eventually boot, however. After which, you can open the command shell, and type:
    *bootrec.exe /fixmbr*
    *bootrec.exe /fixboot*
    ... which ought to make the message go away (and Vista boot faster).

  • How to retrieve email from iCloud using GMail?

    I currently have a Dot Mac email account that I have retrieved from MobileMe by my GMail account. If I move my Dot Mac address to iCloud, what settings will need to be changed in my GMail account?

    Does iCloud still use the mail.me.com server or is it now mail.icloud.com?
    I've gone to www.icloud.com using Safari on my iPad  and my iPhone, but then I hit a wall because I'm not ready to transfer my mac.com & me.com email addresses over to iCloud yet. I paid $99 for MobileMe and I can't see throwing that away this early.
    Hopefully there will be a "Take Control of iCloud" released in the next few months. Also, since Apple is now investigating ways to allow merging of Apple IDs, I'd like to wait until they announce what they determine will be required.
    As for using a desktop computer to access iCloud webmail, I'll have to find the cheapest used Mac that can run Lion and then just use it for those rare times I absolutely have to access it that way. Most of the time that Mac will be completely off and disconnected. I absolutely abhor Lion; it is the worst version since Cheetah.

  • How to fix, incorrect time zone adjustment from iCloud to iPhone Calendar?

    I entered a calendar event on iCloud using my PC.  The event is displayed an hour later on my iPhone. i.e (iCloud) Flight; 2:15pm --> (iPhone) Flight; 3:15pm.
    The Time Zone setting is correct (Eastern Daylight Savings) on both the PC and iCloud.
    I have had a similar issue when syncing calendar between Yahoo and iPhone.
    Any similar experiences? Can this be fixed?
    Thanks.

    I re-checked the iCloud timezone settings and found that it was set to "Eastern Standard Time" not Daylight savings time. Odd. I clicked on the map again and it changed to "Eastern Time".  I tried again and it seems to be working.  I am assuming that the "Eastern Time" timezone adjusts automatically.
    I haven't figured out the issue with Yahoo calendar yet. Any suggestions?
    I also followed up with Ralph Landry1's suggestion and Time Zone support is set to off. Thanks for the heads up.
    Additional threads, I viewed...
    https://discussions.apple.com/message/16441455#16441455
    https://discussions.apple.com/message/19246114#19246114

  • How to fix podcast privileges when using time machine backup on another mac

    hello,
    my imac broke down the other day and is now at the menders. i had been using time machine with a LaCie 500gb external hard drive.
    i am now using my macbook pro as a substitute and want to use the itunes library from my LaCie instead of copying everything over again. I have managed to achieve this by changing the library destination in itunes preferences. However, when i try to "get" the latest podcasts that usually subscribe to, it says "you do not have enough access privileges for this operation". similarly, when i try to buy anything from the itunes store, it will not let me download, giving me an error 5000 message instead. i had signed in correctly by the way. the purchased songs are still in the downloads folder but greyed out.
    any advise would be much appreciated. i'm not that technically minded so please spell anything out to me!

    johndave, did anyone ever respond to your post?

  • How to fix incorrectly/accidentally accepted suspect in Acrobat PDF

    Hi,
    I performed an OCR on a PDF document in Acrobat X, then started going through the document to correct/accept the suspects. I think I may have accidentally accepted an incorrect suspect. Is there a way to review the suspects you've accepted and edit them if they are incorrect. Did many online searches, but couldn't find an answer to this. Very frustrating. Thanks in advance!

    About the only thing you can do after you have accepted the suspects is to export the OCR text to another file (like Word or .txt) and review it.

  • How To Fix jumpy recordings when using video capture for pan shots

    Loving this camera and its great video
    HOWEVER - i have noticed lots of jerking and jumping when i have tried to move the camera while filming, and im not just reffering to shaky hand holding of camera, but rather lurches in the footage as i pan in a circle for eg (NO examples in above film, they are all to terrible to use). Any advice would be very welcome.
     #AdviceNeeded

    Here's a video demonstrating the glitches : http://www.youtube.com/watch?v=Op-5fIjxlkA
    In this example the glitching happened a lot more when I was exporting the whole project (90 minutes long).  The version without the glitching was created by copying just that section to a new project and exporting that.
    I sent them to Compressor using the 'send to compressor' option in FCPX.
    I had a similar thing the other day.  I'd exported a project to Compressor as an h.426 file to upload to YouTube.  When I watched it back it was fine, but I realised I wanted to cut some bits out. 
    I imported the h.264 file into FCPX and made the edits on that file, then sent to compressor again.  It exported much more quickly, but the resulting file was full of glitches (like the the ones in the video).
    I'm sure it just shouldn't be happening and it's driving me nuts.
    Thanks,
    Joe

Maybe you are looking for