How to fix ipad 2 when blue screen appears after dropping it sideways?

I dropped my ipad 2 from my kitchen table to the seat of the wooden chair at the table. The ipad landed on it's side and now the screen is dark blue and I cannot see anything on it. I can hear the camera take pictures though. I tried a reset and even tried slapping it on the back like people said would fix it. These things did not work. I don't know what else to do...

Take it to Apple and purchase an out of warranty replacement for it

Similar Messages

  • There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    Nah - that's just the normal boot process.
    Clinton

  • TS1541 a blue screen appears after a gray screen with the logo and the spinning gear

    start up problem...a blue screen appears after the gray screen and the spinning gear

    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk. You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
    Then Repair Permissions.
    No need to report any Permissions errors........we all get them.
       DALE

  • How to fix "unmountab​le_boot_vo​lume" blue screen error on Pavilion g7 Notebook PC

    Good Evening,
    May I ask you help? I have a error on my laptop. Blue screen, unmountable_boot_volume"- 0x000000ED. I did Start Up test in HP Advanced System Diagnostics.
    Got this:
    Memory Test: Passed
    SMART Check: Passed
    Short DST: FAILED
    FAILURE ID: 9G9XKT-5T96RH-MFPV4K-60WG03
    PRODUCT ID : A1V40UA#ABC
    HARD **bleep** 1
    I tried in Advanced Boot Options, Safe mode- didn't work.
    Last known good configuration (advanced)-didn't work.
    How can I fix this? Could you please help me?
    Thank you for youe time.
    Stanislav

    Short DST: FAILED
    FAILURE ID: 9G9XKT-5T96RH-MFPV4K-60WG03
    ===
    Good evening,
    The above message means the HDD on your computer is dead. You need to replace the HDD.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What is happening when blue screen appears at login

    Does anyone know what the OS is doing between the time the while start up screen with the spinning timer(?) goes away until when the user list appears?
    The reason I ask is that the blue screen seem to be taking longer than usual, and I am wondering what might be happening and if I should be concerned.
    All help appreciated.

    If you hold down Command-V during boot, it will go to verbose mode and you can see what is going on.

  • Blue screen appears after installing Leopard and restarting

    I tried to install Leopard on my MacBook but got the Blue screen after restarting. I found the apple support article number 306857 and tried option C without success. I don't have a firewire cable so option A is out. I don't know how to reinstall Leopard as Option B suggested. I can't get beyond the blue screen. Any suggestions?

    The Apple site is under maintenance, so I can't check the details of the options, but I assume option C is the terminal, when you've started up in Safe Mode. This method worked for me on two machines. You need to type the commands precisely and exactly as they appear in the article, including spaces where appropriate.
    To reinstall Leopard, start up with the installation disk in the drive, and when you hear the startup chime, hold down the C key on your keyboard. You need a USB keyboard. You should get the installation screen.

  • How to fix IPad mail? My screen is blank

    I Could not get mails when clicking on the mail icon on my Ipad

    Hungson,
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support.

  • How to fix MacBook Pro when the screen goes completely grey in start up?

    This problem has been since yesterday and I need help ASAP please! But my MacBook didn't start up after it had died so I had to power it up with the power button. The problem is the screen with the apple logo emerged with the loading circle but the screen was red! I don't know what that means, but after the screen moves on, it goes to a completely grey screen and doesn't go any futhure. Any help would be greatly appreciated! I saw that it may be because of a faulty wire which my I have been using a USB wire to recharge my phone that might be the reason, but the computer continues to freeze and has troubles starting up. Please HELP!!!!

    See >  http://support.apple.com/kb/TS2570
    Also see >  When I start up my Mac book a grey screen appears

  • Ipad mini retina blue screen issue after ios 8 update

    After update to iOS8 over wifi, my iPad Mini with Retina Display is working perfectly, however I had an issue twice since yesterday. While using it, I observed the screen became totally blue (like Windows crashing) and the ipad restarted. Anyone facing such issues?

    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • Blue screen appears after macbook froze and restarting

    yesterday my macbook froze after trying to copy some files onto my hd. so i restarted it and switched back on only to find that the apple logo screen stays there forever and the system won't load. so i tried the apple support article number 306857 and used option c without success. i cant use option a because i dont have another mac and option b i cant use because my cd drive is broken atm. so if someone would be kind enough to show me exactly how to setup the commands so i could do it correctly, becuase i really don't understand how to type out the commands.

    http://support.apple.com/kb/TS1545 shows these steps.
    Start up in single-user mode by *holding Command-S after restarting the computer*. Note that single-user mode always uses the US English keyboard layout.
    *Type these commands, each on a single line followed by Return:*
    /sbin/fsck -fy
    /sbin/mount -uw /
    rm -rf /System/Library/SystemConfiguration/ApplicationEnhancer.bundle
    reboot

  • Blue screen appears after sudden shut down

    Product name: HP G56 Notebook PC
    Error message something like "Boot" "Hard Drive" "Insert CD"

    Bootable device refers to the BIOS finding no device with a bootable operating system available.
    You have a pretty recent notebook.
    Try pressing the power button and then tapping the Esc key. That should get you into the Start menu. There should be an option to access BIOS or Diagnostics or the Recovery Manager.
    F10 will invoke the BIOS and F2 should invoke the UEFI system diagnostic unless the hard disk has failed. The better choice would be F2.  UEFI diagnostics are quite helpful in determining whay a notebook won't start up and boot into the operating system.  There are also diagnostics available in the BIOS.  
    Did this happen when the notebook was in a low battery power state or when it was going into hibernation?
    Have you ever updated the BIOS or run the HP system tuneup from within the Hp Support Assistant? 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

    Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

    You will need to do a DFU restore by holding the home and power buttons down (while the device is plugged in to your computer) until the device's screen goes black and as soon as the screen goes black, count down from 3 and release the power/sleep button, but keep holding down the home button. Then, iTunes will say the iPod needs to be restored. The restore process will take some time and even though the iPod may appear to be frozen, don't interrupt the restore.

  • IPad turned into blue screen then shut down how to fix?

    iPad turned into blue screen then shut down how to fix I cannot play games..

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, restore your iPad using iTunes or iCloud >  iOS: Back up and restore your iOS device with iCloud or iTunes

  • How do i fix my ipod when the screen cracks

    how do i fix my ipod when the screen cracks

    Have Apple, a third-party place or fix it yur self.
    Apple - Support - iPod - Repair pricing
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    DigiExpress.us - The iPad Repair Professionals
    iPod Touch Glass Replacement

  • Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
    This should take all the music off your phone .Then you can resync the music back on to it.
    If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

Maybe you are looking for

  • How to import an XML element into a loop parameter is XSL

    Hi, We are using XSL template to generate output in a pdf format. The input in an XML file. In the XSL we have a loop. Currently the initial and final value of the loop counter is hardcoded in the xsl file. <xsl:call-template name="forloop">      <xs

  • Title Logo in Dreamweaver CS3

    How can i upload title logo in Dreamweaver Cs3

  • GREP for numbers after using Live Caption

    Hello, I am placing image material with live captions in indesign. The file name created usually goes like this: Credit: 0617 name.jpg I would like to remove the date (0617) as well as .jpg automatically. I can do the later with a text search functio

  • Error while installing platform813

    Hi there, I get an error when trying to install weblogic platform8.1 sp3. If I run the installation in console mode (platform813_win32.exe -mode=console -Djava.io.tmpdir=D:\temp -log=D:\temp\install.log) and dump to a installation log I can se the fo

  • Infospoke error - S:RSB_GUI:070

    Hi All, While working on Infospoke whenever I check it,it gives following error, S:RSB_GUI:070 Message no. RSB_GUI070 I am not able to figure out the reason as there is no help given on the error.This error is only coming in production system.Even af