How to fix iPad 3G frequent crashes and going to reboot loop

II'm having problems with my iPad 3G iwi-fi it always crashes while using and sometimes it goes to a reboot loop. I tried everything reset, pressing the home and power buttons, and even restored it many times but still the problems can't be fixed. Is there someone knows what to do?

If anyone has faced this issue and was able to fix it, I am hoping from you to share your fix.
If no fix is there, so i can take it to be fixed since it is not under warranty, and wehre i live it will cost a lot for fixing

Similar Messages

  • Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

    If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
    This should take all the music off your phone .Then you can resync the music back on to it.
    If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

  • I have an iPad 2 and so does my mom.  We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it.  Deleting it and reinstalling does not work.

    I have an iPad 2 and so does my mom.  We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it.  Deleting it and reinstalling does not work.

    Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
    Just a guess.

  • How to fix "iPad is disabled" on home screen

    How to fix iPad is disabled screen?

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • How to fix ipad disabled? it is looking for password, it looks like its frozen

    how to fix ipad disabled? it is looking for password, it looks like it's frozen.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Ipad 2 crashes and goes to "connect to itunes"

    For several months now, my kid's ipad 2 has been unstable. Apps frequently crash and, worse, the ipad itself crash almost twice or trhice per month. Then, the display goes to the screeen with the usb cable and "connect to itunes" message. The only option is to restore the ipad with itunes. This is very annoying.
    Any help?

    Your iPad is in Recovery Mode. Follow the instructions below to recover your iPad.
    http://support.apple.com/kb/ht4097

  • HT1338 How to fix the safari that crashes under 10.8 ?

    Hi, anyone knows how to fix the safari that crashes after upgrading to 10.8 ?
    re-installing the system didn't solve it.
    thanks

    Backup your data and try clean inslall.
    Here's reference.

  • Using Aperture 3.51 I am having frequent crashes and freez ups when editing Canon raw files?

    HI,
         I have an IMac with 4 G of Ram and am using Apeture 3.51. When trying to edit CS2 raw files I experience frequent crashes and freez ups of the whole computer. Any suggestions?

    You didn't mention any color calibration being done on your monitor.  This is an essential part of any color-correct workflow.  What are you using to calibrate your monitor (and your printer)?
    Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer.  The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
    I don't know what you mean when you say "I choose a high standard print option".
    Have you read the User Manual chapter on printing?
    Printing Your Images
    There is also a good appendix on calibration:
    Calibrating Your Aperture System

  • On my iPad Air Safari crashes and quits when I view a slideshow.

    On my iPad Air , Safari crashes and quits when I view a slideshow on an internet site. Sometimes it doesn't crash but the slideshow is freezes. Any idea why?

    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT1926 I get a message stating MSVCR80.dll is missing. How to fix? I have removed and re-installed multiple times.

    I get a message stating MSVCR80.dll is missing. How to fix? I have removed and re-installed multiple times.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I have an ipad 2 32Gb wifi which I bought yesterday and it constantly crashes and will not reboot. Does anyone have a solution or is this a straight exchange??

    Hi
    I bought an IPAD 2 32GB wifi yesterday and was looking forward to using this. But it constantly crashes and will not reboot. Has anyone else had this problem and was there a solution? if not is this a straight return to the store and money back????

    Hi thanks for your advice, but i tried the reboot as you suggested and this does not work and the iPad now seems completely unresponsive. DesLite having a full charge I can not get any sign of life from the iPad.

  • How to make a button to stop and run a for loop?

    How to make a button to stop and run a for loop?  and if it is stopped it shall start from where i t stopped.

    Your VI has some very fundamental flaws.
    The start/stop button is outside the FOR loop, thus it will NOT get read during execution of the FOR loop, but only before the FOR loop starts. Think dataflow!
    Thus the terminal of the start/stop button belongs inside the FOR loop.
    Your FOR loop iterates 20x, which probably takes about a nanosecond. You will NOT be fast enough to reliably press the start/stop button during a specific iteration of the FOR loop.
    Your code does not "stop and run" a FOR loop (sic). The loop always spins, but executes an empty case when "Stopped". I guess that's what you actually want?
    Once you solve (2), the x indicator will contain a random value whenever you "stop".
    As soon as the 20 iterations complete, the outer while loop spin an things start over, another nanosecond later.
    Place e.g. a 500ms wait inside the FOR loop to solve this.
    Don't place terminals of indicators on top of formula nodes.
    Your formula does not produce any output, so really has no purpose.
    Use a real "stop" button to terminate the while loop (mechanical action: latch when released). Right now you are using a plain switch, which does not reset to false before the next run. This means that you need to manually reset it before running the program again.
    It is oftern useful to operate the VI in execution highlighting mode. You will immediately see that your button does not get read during execution of the FOR loop. Try it!
    LabVIEW Champion . Do more with less code and in less time .

  • My Ipad turns off programs and goes back to startpage.

    I have an iPad ( 1 ) the oldest type. It has always got the last upgrade of iOS but more and more often my iPad turns off programs and goes back to startpage of iPad.
    What can I do ?

    1. Double-click the Home button to close all Inactive Apps in Task Bar
    2. Hold the Apps in Task Bar down for a second or two until you see the minus sign
    3. Tap the minus sign to close App
    4. Tap center of screen to return to Home Screen
    5. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo. Ignore the red slider

  • I have an original iPad.  As I'm using it the iPad throws me out and goes back to home.

    I have an original iPad.  As I'm using it the iPad throws me out and goes back to home.  This happens from different apps and from Safari.

    This might help for a while and if you do it from time to time, it might continue to help.
    Clear Safari, close all apps on your iPad and reset the device.
    Go to Settings>Safari>Clear History, Cookies and Data.
    In order to close apps in iOS 5 or iOS 6, first tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • IMac with OS X 10.7 crashed and will not reboot

    My iMac crashed and will no reboot.
    I've tryed to repair the disk using my startup DVD and got a weird message
    "Invalid bsd file type. The volume mac hd could not be reparred".
    Can anyone please help?
    Carlos

    Welcome to Apple Support Communities
    It means that the OS X volume is damaged. Unfortunately, the only thing you can do to repair it is erasing it, so go to Erase tab and erase the drive. Then, reinstall OS X from the DVD (you will go back to an older OS X version).
    If you want to keep Lion, start in OS X Recovery, holding Command and R keys while your computer is starting, and erase the disk and install OS X from it

Maybe you are looking for

  • Call transaction mode 'A' and mode 'N'

    Hi all In my below mentioned code statement bdc call transaction eg33 mode 'A' is working fine in both programs main program and called(submit) program (highlighted here). But if I give mode 'N' in both called and calling program call transaction  th

  • Top level navigation problem anonymous portal

    Hi everybody, We have an anonymous portal with named anonymous users. When you log on in the portal with a normal user, the top level navigation works fine and all the content is displayed. When you log on in the portal with an anonymous user, all th

  • "location" method in "windows" object

    Hi, I have the following prob: on the app. that I'm trying to capture (with captivate 3.x), I'm using the javascript: window.location (the method "location" on the object "windows") to open a popup with content inside. It works well of course without

  • When I open iPhoto it tells me there are recovered photos

    When I open iPhoto it tells me there are recovered photos & do I want to save them.When I click no it saves them anyway as Recovered Photos in Albums.When I open these files they are blank.This is very annoying as I have to go to Albums & delete thes

  • Problem installing Anna on c7 ..help, please

    Hello, Today I receive a message from nokia with the new ANNA ... i tried to install it using the nokia ovi suite.... ...first step : backup ...ok... ..but next ...a problem....keep in the middle of the instalation...retry....and finally it returns a