How to fix libintl-8-vc100.dll missing error.
I get the following error twice every time I open a PDF (or Acrobat). If I hit ok I get into the PDF or into Acrobat itself. The error is "The program can't start because libintl-8-vc100.dll is missing from your computer. Try reinstalling the program to fix this problem." I have reinstalled more than once and I still get the error. Any suggestions as to how I can fix this so that it does not popup every time the program starts?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)
Similar Messages
-
HT4623 how to fix iphone could not connect missing pairing record
how to fix iphone could not connect missing pairing record
I resolved this by temporarily disabling my mcafee antivirus active scan. Didnt even close itunes, just unplugged and replugged in my phone and wolla.
-
after updating to adobe reader 11.0.3 my registry was corrupted with a gapi32.dll missing error. It was not missing and was conflicting with outlook as this dll file is a common file. The only way I could fix the problem was to do a system restore back to when I had the 11.0.2 version and everything will work with that. You have a problem with version 11.0.3 installation. The same thing happened on 3 computers so I know it is this new version of adobe reader which is the problem.
It would be great, if you could provide us with the following details:
1. The OS you are working on.
2. The version of MS Office installed on your machine.
3. A screenshot of the error message along with the scenario in which the same is displayed.
4. How exactly did you go about updating Reader 11.0.02 to 11.0.03. Was it via the updater mechanism or by downloading the patch from the Adobe site.
Also, it would be great if you could let us know if there was any other Windows or Antivirus related updates applied on your machine in the same timeframe as the Reader update. -
Niembrt.dll missing error message on startup
I have a Win2000 NI PXI machine that always comes up with niembrt.dll missing at C:\Program Files\National Instruments\Max\Experts and from C:\WinNT\System32 and etc..
Apart from that error on start-up, I do not have any problems at all on the machine
Does any one know why this error is being generated and any simple fixes.
Does it need MAX to be re-installed.
I am attching the software installations report on the machine
Attachments:
NI-ATE03 Software Installations Report.txt 2 KBHi,
http://forums.ni.com/ni/board/message?board.id=170&message.id=140327&requireLogin=False
says the niembrt.dll is actually used by the 7041 card. Since you're not using it, then everything should be fine.
You need to go back to the DAQ drivers (since the 7041 and 7030 are embedded rt controllers with a DAQ board), and uninstall any RT components that show up, especially since you're not using realtime as you said you don't have LabVIEW.
Hope that helps.
Thanks
Sacha.
// it takes almost no time to rate an answer -
elements 12 organizer has stopped working and premiere elements 12 gets msvcr80.dll missing errors
First deactivate the product(s) and then uninstall it from the machine using the procedure specifically for your OS. If in Windows and I suspect it is then uninstall from the Control Panel.
To deactivate the product you need to go Editor and then:
Help >> Deactivate
Please also make sure that you have your original CDs and /or DVDs handy including the necessary serial number as you will need them to install the product(s) again.
After uninstalling the products, you need to restart the machine before you start to install again.
You have created the backups of your sentimental photos, right? You need to just in case the machine causes more problems down the line.
G/L -
I tried to update itunes to 10.5 but wouldn't install. I then tried to uninstall and reinstall and have had problems ever since. I tried removing every apple file on my computer( itunes, bonjour, etc..) with REVO uninstall. Then reinstalling to no avail, I receive AVFoundationCF.dll is missing follwed by error 7 windows error 126. I have been at this all day, and has really gotten me frustrated. I have searched through these forums and tried different solutions people say have worked for them but not for me. My last resort is to wipe my system and restore to factory settings, which I dont want to do. Can anyone offer some advice? Thanks
I just found out why it was throwing out those error, you have to do a complete cleaning of your cache, it retains all the Apple information for some reason. I used a cache cleaner, but you van use the cache cleaner in Windows 7 or Vista 64 bit for this. Now Itune downloaded but without installing Quicktime. I actually like that.
-
How do I repair with mozsqlite3.dll missing?
I interupted an update and now it will not start, I am running ver 4.0
Do a complete uninstall of firefox, you can leave your settings, and install the newest version, [http://www.mozilla.com/en-US/firefox/fx/?ref=logo firefox 5]
-
Autorun.dll missing Error code 0x7e
I am trying to install SharePoint 2013 on my Laptop running Windows server 2012. The SharePoint copy is a file downloaded from Microsoft site an evaluation one. The prerequisites were installed successfully and, when I click the install SharePoint
server button on the setup window it throws an error message "The file 'atorun.dll' could not be loaded missing or corrupted. Setup cannot continue. Error code [0x7e]".
I tried a new DVD with a fresh download but the same response. Appreciate a response which may help me to sort-out this issue please.
Mark
MarkHi,
Where did you download the SharePoint Server 2013? How did you install it? Burn it to a DVD or just mount it to a virtual drive? The current issue may be caused by the corrupted ISO file. Please
try to download the ISO file again on a different computer to see if it works.
Download Microsoft SharePoint Server 2013
http://technet.microsoft.com/en-US/evalcenter/hh973397
Hope it helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
When i try to open the Terminal I get this error. How can I fix it?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Good Evening,
May I ask you help? I have a error on my laptop. Blue screen, unmountable_boot_volume"- 0x000000ED. I did Start Up test in HP Advanced System Diagnostics.
Got this:
Memory Test: Passed
SMART Check: Passed
Short DST: FAILED
FAILURE ID: 9G9XKT-5T96RH-MFPV4K-60WG03
PRODUCT ID : A1V40UA#ABC
HARD **bleep** 1
I tried in Advanced Boot Options, Safe mode- didn't work.
Last known good configuration (advanced)-didn't work.
How can I fix this? Could you please help me?
Thank you for youe time.
StanislavShort DST: FAILED
FAILURE ID: 9G9XKT-5T96RH-MFPV4K-60WG03
===
Good evening,
The above message means the HDD on your computer is dead. You need to replace the HDD.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How I fixed the iTunes 7.5 installation error
Hello, just wanted to say that after two days I figured out an easy way to fix the problem I had after downloading iTunes 7.5. I was getting an buffer overrun error on QuickTime and knew that iTunes wouldn't open because of QuickTime. I re-installed iTunes and went into safemode and deleted everything that referenced QuickTime. Then I downloaded an older version of QuickTime here:
http://www.apple.com/support/downloads/quicktime72forwindows.html and after that was able to open iTunes. Good luck to everyone. After reading the boards for two days I know that I'm not the only one with this issue.Hi Niel,
I tried the instructions and I received another message which said: "The module ".d11" failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found." Thank you for responding! Any other suggestions for this issue? Help! -
FYI: How to Fix "iTunes Cannot Find Original File" Error
Yesterday morning, I opened iTunes and tried to play a file. I got the old "iTunes cannot find the original file" error. I tried another file. Same thing. I tried restarting iTunes, holding down the shift key, and making sure iTunes knew where my Library file was. Yep. Still no dice. So I came here, and did a search for help. I could not find any definitive answers to this question. So I did a Google search and found the fix in an old Metafilter thread. Given that this problem seems a little common, I thought I'd post my solution here, for anyone who has this issue in the future.
First things first, make sure that it's not just an issue of pointing iTunes to your current library location. Go to your advanced preferences and double-check the library location path. If this doesn't fix it, then it's time to go my route:
1) Open your iTunes folder in windows explorer. Look for a file called "itunes library.xml". Copy that file to your desktop or somewhere else so that it's backed up...in case something goes wrong.
2) Open the original XML file in notepad (right-click, "open with", "notepad").
3) In this XML file, you will see a paragraph of information for every file you have (songs, podcasts, videos, etc.). In each of those paragraphs, there is a file path specifying where the file is supposed to reside. This is how the itunes library.itl file knows where to look. In my case, it should have been "e:/my music/itunes", but instead, it was "e:/my music/itunes/itunes music". The program had created that folder for some reason, and all my files were pointing there.
4) Check a few of the paragraphs and see if they are pointing to your actual music folder. If so, then you have another problem...sorry. If not, then continue on:
5) Go to edit->replace (or control-H). In the "find what" box, enter the incorrect file path (in my case, e:/my music/itunes/itunes music"). In the "replace with" box, enter the correct path of your itunes music folder (in my case, "e:/my music/itunes". Then click "replace all".
If you have a lot of songs, this may take awhile. I have over 25,000 files, so it took at least 18 hours.
6) When it's done, quit notepad and save the XML file. Open iTunes. If it doesn't automatically start updating your library, then try to play a song. If you get the same old error, then quite iTunes, then re-open it, go to the advanced preferences and select the correct file path for the library location. This should fix it.I am also finding many "ghost file" duplicate files (with the exclamation point "can not locate files" message), after pointing Itunes version 8.2.1.6 to my music folder on a separate, networked hard drive. My understanding is that the "Consolidate Files" feature in Itunes is supposed to properly identify all of the file locations, but it only worked for about 1/5 of our 10,000 plus files before it stopped running. (I've read in other forums that this software is buggy, and gets confused with long song titles, etc.)It also leaves you with duplicate "ghost" files to delete, when the music from the separate drive is "added".
I can not find a file called ituneslibrary.xml to try your suggestion, when I open my Itunes folder. When I do "get info" on the individual music files in Itunes that can't be located, the "where" field = "not available". I have doublechecked the library location in preferences and it is properly pointed to "K:\itunes" which is the correct location. -
Frontend instance: Hana studio shows up with MSVCR100.DLL missing error
Hi all,
while trying to start the HANA Studio on my (newly created, nothing modified) frontend instance for the BW740 Trial I get an error message dialog telling me that MSVCR100.DLL is missing.
What is going wrong here ? Am I supposed to install this C++ related DLL ? Or is the Windows image on which this installation is based upon corrupted ?
Any help is appreciated,
Gerald SauerweinHi Gerald,
quick question, which of these two solutions are you using:
SAP Business Warehouse 7.4 SP5 incl. SAP Business Objects BI 4.1 SP2 on SAP HANA 1.0 SP7
SAP Application Server ABAP 7.4 SP5 incl. Business Warehouse on SAP HANA 1.0 SP7 [Developer Edition]
Both use different Windows images and it help us narrowing down the issue.
Thanks and Regards,
Hannes -
I have a SQL Server Reporting Services report that has a textbox within a Report with variations of the following expression
=Sum(IiF(Fields!RegisterID.Value = 6000, 1, 0)
and
Iif(Fields!PointID.Value = 500, 1, 0)) / Sum(Iif(Fields!PointID.Value = 500, 1, 0))
I see the following error when I try to preview the report:
The Value expression for the text box ‘Textbox2’ uses an aggregate expression without a scope. A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset.
What am I missing in this this expression to make it run incorrectlyCan you include dataset name in your sum functions? e.g. Sum(IiF(Fields!RegisterID.Value = 6000, 1, 0)
and
Iif(Fields!PointID.Value = 500, 1, 0)) should include your dataset name as Sum(IiF(Fields!RegisterID.Value = 6000, 1, 0) and Iif(Fields!PointID.Value = 500, 1, 0),"datasetname")Like wise Sum(Iif(Fields!PointID.Value = 500, 1, 0)) should also have dataset name Sum(Iif(Fields!PointID.Value = 500, 1, 0),"datasetname")
Gaur -
How To Fix Mavericks Mail Unable To Connect Error
Mavericks Mail.app stopped being able to authenticate to any IMAP or POP mail servers -- my own OS X Server.app, iCloud, Gmail, etc. iOS clients could connect just fine, and I see that many, many others are having this problem as well. I solved this, but essentially by throwing in the towel and using these posts to bring Mavericks Mail and the login Keychain to their factory settings.
The following worked for me, and blowing away the Mail settings and Keychain were both necessary. If anyone has a less drastic solution, please post it. Make sure you backup any necessary certificates or messages before wiping this all out.
sudo rm -fr ~/Library/Caches/com.apple.mail ~/Library/Saved\ Application\ State/com.apple.mail.savedState* ~/Library/Application\ Support/AddressBook/MailRecents-v4.abcdmr* ~/Library/Containers/com.apple.mail ~/Library/Mail ~/Library/Preferences/com.apple.mail*
Keychain Access>Preferences>Reset My Default Keychain
I also used Disk Utility to fix permissions and did a safe boot to clear out a bunch of cache, though these steps didn't fix this specific problem.I posted too soon -- this problem reappeared. Per this article and Apple support page, luckily a simple rekerberization of the OD Master fixes the problem. My fingers are crossed that it stays fixed.
This worked:
sudo touch /var/db/openldap/migration/.rekerberize
sudo killall PasswordService
# start Server.app, restart Mail
Maybe you are looking for
-
Event ID 27 from sourese1 cannot be found
In server 2012 r2 In event viewer we are getting this warning error
-
SQL Server 2005 Workgroup Edition compatibility for SAP B1 2005B
Hi Experts, Please advise SQL Server 2005 Workgroup Edition can be used as the backend for SAP Business One 2005B. Thanks, Shakeel
-
Web Service and result handler problem
Hi! I load WSDL file and then invoke addnumbers() method without problems. But I don't get any results. resultHandler and faultHandler silent after addnumbers invoke. Where is the problem??? My code: public function useWebService():void { WS = new We
-
How do you ocr pdfs without having humongous increase in file size?
I ocr'd a 60mbyte pdf with Adobe Acrobat 10 so I could search it and it came out to about 360mbytes. How can I keep the file size smaller when using ocr on pdfs? I have about 100 documents I need to OCR and that would use more drive space than I have
-
Enterprise Manager Grid Control can send SNMP Traps to third-party?
GC 11.1 It looks like a simple config, but I've got into a confusion about it. I'm trying to figure out the configuration to send SNMP traps to a third party server. My scenario is: Node A (managed, monitored) ---- GC box------ SNMP box (final destin