How to fix Maps positioning problems in X6

I had an Nokia 5800 at the start of the year before it got stolen, and nokia maps on it worked perfectly. After it was stolen I got a X6 (16g) as a replacement, but the maps have never worked properly for me. At first it looked different to the map I had on my old 5800 and would keep asking me for a license, so I updated the software with OVI. The latest software looks the same as the maps on my 5800 but the new problem is that the positioning is constantly off by over 300m, making the gps unusable. I've tried changing the positioning methods but nothing seems to work.
Anyone know a way to fix this? The store I bought it from was no help. It is not a parallel import btw.

Sigmund, we were already covering this topic in your previous thread, but you never responded.
http://forums.adobe.com/message/4955396#4955396
Please don't start up a new topic on the same subject, as it can be confusing keeping track of what we have and have not already discussed.
Have you set up your project using the settings for AVCHD Full 1920x1080 HD?
Did you use Premiere Elements' Video Importer (under Get Media/From Flip or AVCHD Camera) to get the video from the camcorder to your computer? (This is as opposed to putting the SD card in your card reader and using Windows Explorer or Finder to copy the video over.)
Before you assume that your computer is powerful enough to edit video, please provide information on your processor speed and RAM load. AVCHD, in particular, can require a lot more horsepower than Adobe's listed "minimums".
Finally, please tell us, per your other thread, where you're seeing the graininess and vertical lines? Is it on Premiere Elemenets' Monitor panel or on your output. If your output, which Share settings did you use?

Similar Messages

How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.

You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset please help thanks!!!!

Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset please help thanks!!!!

Post this in the iPod Touch forum.
https://discussions.apple.com/community/ipod/ipod_touch
B-rock

How to fix the position of table columns.

Hay all,
Can anybody tell me that how to fix the position of columns in a table.By default the columns can be moved to any position in the table.
Regards,
Sharad Agarwal

table.getTableHeader().setReorderingAllowed(false);this will do...
Regards,
Byju

How to fix the position of different component?

Hay all,
Can anybody tell how to fix the position of any component so that they cant be moved from there initial positiion
Regards,
Sharad Agarwal

Set layout to null and set bounds of the component to whatever you like.

HOW TO FIX THE WIFI PROBLEM

HOW TO FIX THE WIFI PROBLEM: Settings > Wifi > (little blue arrow) > scroll down to "Renew Lease" and then click on it.
Enjoy

Didn't work for me.
What did work was going to the Wifi network settings and setting the HTTP Proxy to Auto rather than Off.
Worked for both iphone4S and ipad2.

I've no idea how to fix my service problem ?

So a day or so ago my phone was having troubles finding wifi so I turned it on and off of airplane mode, it found the wifi , but soon after my service depleted ... I turned my phone on and off but the service did not return , I then reset the network settings and I had service again ! But only due to 3G which my plan doesn't cover so it had to be turned off ..I still have no service and I can't figure out how to fix it. So if you could tell me how that would be lovely !?? One more thing ..does 3G cost money , if it's not in your plan, but you are connected to wifi ? With 3G my phone gets 3 bars but without it goes to one bar immediately and then says "searching /no service " soon after
I also don't know if I'm posting this in the right place or again, sorry :/

It's hard to say what the problem is, but if you are concerned about data charges from using 3G you can turn off cellular data in Settings > Cellular to eliminate all doubt. Slide Cellular Data "off". That will constrain your data connection to Wi-Fi only.
Have an Apple Store evaluate your iPhone.

How I fixed my conection problem

Here's my setup:
Wireless IP (Motorola canopy)
The connection comes into the house as ethernet (I'm conected wirelessly to the ISP's router and it's using DHCP
That's pluged into an airport express that acts as a bridge to the ISP's router
iMac G4 wireless
Windows xp notebook wireless using a Netgear PCMCIA card
Son's XP desktop using a DLink internal wireless card
Symptoms:
This worked but after several hours the airport express wouls stop forwarding the new DHCP info. The green light was On but I could not connect to the internet wirelessly.
Here's how I fixed it:
I turned off ipv6 in the network settings. I had it set to Automatic. When I turned it off It has worked like it is suposed to.
I hope this helps someone.

The fact that you saw no glitches while running Logic before applying the update means almost nothing because that uses only a small subset of system resources. Far more significant is that Safe Mode restored some missing functionality: because it disables non-essential items like user fonts, third party drivers, & so on, it points to problems in those areas.
Equally significant, the fact that there are relatively few reports of post-update problems among the several million Snow Leopard users points away from the update itself as the cause of your problems.
Separate & apart from that, it so happens that I'm a sound engineer/system designer/board operator with nearly 40 years of professional touring experience. FWIW, I never have & never will update the software of any system I must rely on professionally (whether it is running on a Mac, a PC, or dedicated hardware) unless & until I can thoroughly test it first and I have a trustworthy backup/recursion strategy to fall back on in case of problems.
I strongly suggest you learn from your unpleasant experience & do the same. I have had far fewer problems with Macs than with PC's, but nothing is 100% reliable to begin with. Changing the OS software part way through the tour is just asking for trouble, no matter how reliable that has been in the past. Even if the budget allows for nothing better than a stack of burned CD's & a couple of consumer grade CD players, no professional tour can afford to be without some fallback strategy in place. That should be self-evident & require no warning from Apple or anybody else.

How to fix the position of JInternal frames added in JFrame

Hay Frnds, I am having a problem. I have a JFrame ,in which i have added five JInternalFrames. My problem is that i want to fix the position of thaose Internal frames so that user cant move them from one place to other. Is there any way to fix there position. Plz reply as soon as possible. Its very urgent.
Thanks.

In Jframe I added one rootPanelI don't know what a rootPanel is or why you think you need to add one.
The general code should probably be something like:
frame.add(userPanel, BorderLayout.CENTER);
frame.add(buttonPanel, BorderLayout.SOUTH);
frame.pack();Read the section from the Swing tutorial on [Using Layout Managers|http://java.sun.com/docs/books/tutorial/uiswing/TOC.html] for more information and working examples.
For more help create a [SSCCE (Short, Self Contained, Compilable and Executable, Example Program)|http://sscce.org], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

How to fix the position of JInternalFrames added in JFrame.

Hay Frnds, I am having a problem. I have a JFrame ,in which i have added five JInternalFrames. My problem is that i want to fix the position of thaose Internal frames so that user cant move them from one place to other. Is there any way to fix there position. Plz reply as soon as possible. Its very urgent.
Thanks.

import javax.swing.plaf.basic.*;
        BasicInternalFrameUI internalframeUI = (BasicInternalFrameUI)frame1.getUI();
        internalframeUI.getNorthPane().addMouseListener(new MouseAdapter() {
            public void mouseReleased(MouseEvent evt) {
                frame1.setBounds(0, 0, frame1.getWidth(), frame1.getHeight());
        });

How to fix exclamation mark problem

Basically since I updated to iTunes 11 and I went to make a new cd to listen to in the car a lot of my songs have got an exclamation mark next to them and says it can't find the original file so since I HATE the new iTunes i decided to downgrade back to iTunes 10. what ever it was before the update came out to see if that would fix the problem but no that didn't work, so I've since been looking all over Google to try and find a solution to this but everything I found was mostly about moving the iTunes library and how to fix that problem but in my case that isn't the problem at all as I haven't moved the library anywhere, I did find a post about transferring purchases from my iPhone to iTunes so I did that thinking it would fix the problem as all the songs that have the exclamation mark next to them are on my iPhone and play back perfectly fine but iTunes would only transfer my app's not my music, is there a way to change this? Or if anyone else knows how to fix this problem in a different way I would very much appreciate the answer to this problem as it's driving me insane!
Thanks in advance
Jordan

This happens if the files are no longer where iTunes expects to find them. Possible causes are that you or some third party tool has moved, renamed or deleted the files, or that the drive they live on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use CTRL+I to Get Info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes. See this post for a detailed explanation of what the script does.
If your media is scattered around you may need to repeat the search using each of the different locations where you have stored things.
tt2

Please tell me how to fix this annoying problem

Whenever I open a new Safari window (apple-N) the page width falls just short of completely filling my monitor screen. I'd like it to go to the absolute extreme edge of my screen by default, how do I do this?

I just posted a new topic with a possible fix to your problem. The topic's title is "Javascript Bookmark to resize Safari Windows", or try the following link:
http://discussions.apple.com/thread.jspa?threadID=1317489&tstart=0

Please help me ! how to fix the position of NSWindow ?

Hello everybody,
I have a NSwindowController < NSWindowDelegate > (with windowWillUseStandardFrame implemented) which is supposed to fix the position of my window.
Except never this method is called ! Nevertheless there is indeed a delegate...
In fact in the launch of my soft, the system makes little as it wants: it cascades me windows or keeps me the last position of every window.
I tried to deactivate the cascading, the same problem...
All the directives concerning the NSWindow seem to be ignored !
I do not know if it is a pure coincidence, but since I passed of a macBook 13p under 10.6 (XCode 4.0.1) in a mini mac with screen 24p under 10.7 (XCode 4.3), everything seems not to work any more as before ?!
I wish I can align in the topleft of my screen all my windows (I tried all the concerned methods, the same problem) to loosen me of the resolution of the screen.
If you have an idea, it will be welcome.
Thanks you in advance.
FM.

OUNAS wrote:
I find very openly the management of the positioning of a window very complex while it is a basic task !
Thanks.
FM
Bonjour Ounas,
It is not complex, within Cocoa simple things are easy to implement (and complex are possible). If you find it the other way you made a mistake somewhere.
In your case I would start by putting a breakpoint in the methods and run the application in Debugg Mode.
And if :
- your method is not called
- your window is 0x0 inside the method
Closely look in Interface Builder if the connection is correct between your window and its variable in code and if your controller object is well assigned as its delegate. For that just select the window object in the nib and do a right/control click on it to see if it is well connected with controller's objects (alternatively use the Menu -> View -> Utilities -> Show Connections Inspector).
As for the time to call your "fix" method what about the "- (void)windowDidLoad" call in your window controller subclass ?
I had lots of troubles to get it called when I started with Cocoa. For it to works you have to be sure the window is well connected in IB to your window variable. And you need to load that f*¿!^ fichue window by any call to it via your controller like
//After call window is 0x0 in the debugger if you look at it by unfolding the triangles self>controller>NSWindowController
controller = [[RTWindowController alloc]init];
//This one will trigger the controller's windowDidLoad method
[controller showWindow:self];
//a simple [controller window] is enough to bring it to life
hth
laurent

How to fix the position of controls, so table expands into whitespace and doesn't push lower controls down (invoice report in SSRS 2005)

I am designing an invoice report. There are some controls at the top of the report (company logo, date, invoice number etc), followed by a table listing the items in the invoice, followed by some controls at the bottom (subtotals, returns address etc). The report should always print onto a single page.
I want the controls at the bottom to have a fixed position on the page. There is sufficient whitespace between these controls and the table above for the table to expand to list many items. However whenever it expands it pushes the lower controls down. This results in them spilling onto a second page.
Is there a way to fix the position of controls and suppress the "gets pushed down when controls above expand" effect?

Thanks for that. I found a good solution using rectangles here: SQL Server 2005: Report Design Best Practices and Guidelines
Here's the relevant part (see underlining):
Using Rectangles to Keep Objects Together
Rectangles in Reporting Services can be used either as graphical elements or as containers of objects. As object containers, they keep objects together on a page and control how object move and push each other.
To keep multiple objects together on a page, put the objects within a rectangle. You can then put a page break before or after the rectangle by using the PageBreakAtStart or PageBreakAtEnd properties for the rectangle.
Using Rectangles to Control Item Growth and Displacement
Items within a rectangle become peers of each other and are governed by the rules of how peer items are positioned on the page as they move or grow. For example:
Items will push or displace each other within the rectangle.
Items will not push or displace items outside the rectangle, because they are not their peers.
If necessary, a rectangle will grow to accommodate the items it contains.
You can use this logic to your advantage when dealing with objects that expand. For example:
If you want to leave a blank space in your report for a table to expand into, group the blank space and the table in the same rectangle. When the table grows, it will push the blank space .
If you want to prevent a matrix from pushing items off the right edge of the page, put the matrix within a rectangle with blank space to its right. Now, the matrix is no longer a peer to the other item on the page and will not be able to push it until the matrix can no longer be contained within its rectangle.

How to fix Software Update Problem?

I was do some update includes new 10.5.1, iTunes, QuickTime, and many more, but today I test to check new update I got blank list and I was try to do via Terminal and got this message
Software Update Tool
Copyright 2002-2007 Apple
XML parser error:
Encountered unexpected EOF
Old-style plist parser error:
Malformed data byte group at line 1; invalid hex
What's going on? and How to fix it my Leopard Software Update Problem

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

How to fix Maps positioning problems in X6

Similar Messages

Maybe you are looking for