How to fix my iphone 3g it would not boot up it just says at the apple logo screen when you turn it on
how to fix my iphone 3g it wont boot up it just goes to the apple logo screen and freeze up
Try here. iPhone and iPod touch: Frozen and unresponsive
Similar Messages
-
My iPhone 3G 16gb in white: I did all the things you mentioned, but it just keep looping the Apple logo and doesn't turn off until it is out of battery, and I am using a MacBook Pro 15inch Unibody if that does matter
If you are in Hong Kong, go to Digital Trade, 1/F, Sincere Plaza, Argyle Street, and it will cost you 120-150HKD, but before you go check that your power button and home button are working correctly, if not press as hard as you can, hope this will help.
-
my iphone 5 on the ios 7.1.2 suddenly wont fully turn on...it gets stuck on the apple logo and stays like that for approximately to 90 secs then goes blank but I can see a bit of lighting behind the dark screen....it goes off by itself and comes on by itself trying to boot but still gets stuck on the apple logo after the dim light shows....when I connect to iTunes my phone can only be recognised only in recovery mode thus if I force it into recovery mode. My main worry is I don't have a back up of any of my data...on icloud I have just less than 2GB of my data which is as a result of incomplete back up...HOW CAN I GET THIS PHONE WORKING AGAIN WITHOUT LOSING MY DATA...if I can only just recover my data I would really appreciate it as I really need almost everything on it back...if I can only get retrieve my data and lose the phone I wouldn't mind at all....Anybody know how to resolve this??Kind Regards
Anyone have any suggestions? or is everyone else just as clueless as me !
-
My iphone just sits on the apple logo screen
Hi hope you can help my Iphone 4 just sits on the Apple logo even after 8 hours of chatge. I have tried to connect to the PC (itunes) with no success cannot reset or connect
You need to restore the phone from Recovery Mode: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
I need help to be able to see if I can fix this or something.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have so much on my phone I can't lose between me and my Military person that I cannot lose. I tried contacting support but the only way to get ahold of them is if they call my iphone or i put in my serial number which is conviently not accessable seeing as it's all in a phone that is frozen. I keep holding the home and the turn on button but it hasn't gotten me farther. How the **** am I suppose to get it to turn on so I don't lose all his pictures and messages? and none of this is backed up either.
Try plugging it into a computer with iTunes opened. If you see anything that says restore, say no.
Sometimes these issues resolve themselves when you connect the device to iTunes.
What happens when you hold the home and sleep/wake button? I know it doesn't work, but does it shut off at all? -
Help! My iPhone won't boot! It is stuck on the Apple logo.
Hello,
Please help me! My iPhone 4 (iOS 5.1) won't boot (it's just frozen on the Apple logo!) Please help! I don't want to restore it because I have iLife in there!Hi gdmacguy,
I can't restore from backup becuase my phone is passcode-protected. I'm trying to restore as new device now. -
I took my iMac 2010 to a "Third Party" company to replace my hdd, they did, but now it will not boot. if i took this to the Apple store, how much would it cost to fix? if i buy my own SSD (£70) Thanks a LOT!
DewiRobbo wrote:
Well, this "third party" is going to put my old hdd back and not charge me any money (as he did not fix it) but i think its better off taking it to an AASP because i have a feeling Apple store will charge way too much.
The way I read that comment – you seem to suggest the Mac was broken before the third party replaced the disk - is that the case or was it working before the HD was replaced?
Since the Mac is out of warranty you will have to pay for any repairs wherever you take it. Authorised Apple service centres will be able to get parts whereas any non certified technicians will have to use 'grey market' parts since Apple will not sell parts to the public. These may be reconditioned or not official parts - it's a risk to use them. Visit the Apple store & ask them - there is no point in lying about it being handled by a third party. An Apple tech may be able to tell when they open the case, depending on how meticulous your third party was.
If you are handy with a screwdriver & have tools and a lot of patience you could use a guide on iFixit.com, but there is no indication of why this Mac not booting up.
It could be that the disk is not formatted correctly.
Are you sure the tech copied an OS onto the disk? Did they install the OS for you or did they clone the old disk?
Can you boot from a backup disk or from an install disk? Does the disk appear in Disk Utility when booted from another OS (either the installer or a backup).
'Not booting' can mean so many things, what does booting do exactly? Grey screen, black screen, any noises or tones, any signs of life at all…?
If you look at the iFixit guides you will see many fiddly connectors, if the tech failed to hook them all back up it could explain the failure, or perhaps you just have a disk that is 'dead on arrival' - sometimes that happens. A properly trained technician should be able to figure that one out. -
when i plug in my ipod touch it goes to the battery witht he bolt under it the goes to the apple logo screen and after a while it will flash white like its trying to go to the lock screen but just restarts and restarts the process and keeps doing it. What should i do? Is there any way to fix it?
See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My ipod touch 4g won't turn on, even if i reset it. If i reset it it just brings up the apple logo for about 10-15 minutes, flashes white, then repeats the before mentioned. Has anyone else had this problem and/or know how to fix it?
Did you try to connect in recovery mode to restore your ipod? iPhone and iPod touch: Unable to restore
-
so i tried updating my iphone 4 and my whole computer crashed and when i tried to turn it on, it would just show the apple logo and load, then turn off.
See here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
My iTouch won't turn on. It just stays on the apple loading screen. How do i fix it?
My iTouch won't turn on. It just stays on the apple loading screen. How do i fix it?
Try here....
iPod touch: Hardware troubleshooting -
my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help
Hello warhogs17,
After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
My phone is frozen on the apple logo screen that shows when restarting. I tried to restart it again, but it still freezes and stays on that screen . I really dont want to reformat! Does anyone have any idea how to fix it? THANKS!
You have to put it in dfu mode, when its plugged into itunes reset it by holding the home and the power button, when it starts back up let go of the power button and just hold the home button it should find your phone and say its in restore mode. from there you just have to restore it
-
My iphone 4s crashed today and will not go back on. I see the apple logo, but nothing else will happen.
Hello jaicob1990,
Try the steps in the article below; it will give you multiple options on how to resolve the issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Maybe you are looking for
-
I would prefer not to receive the HD versions of tv downloads. They take up way too much space on my drive. Is there any way to prevent the initial download? I am currently coping by simply deleting the files once downloaded.
-
Force PDF to open in browser to preserve relative links?
We have thousands of PDF files that are set up to include relative links within the document to other PDF files. The issue we're having is that when people have set up their browser to open the PDF as a separate application, the relative links revert
-
Custom subtype not visible in ESS benefits
Hi Experts, in erp2005, i created a custom subtype 9B for IT0021 (family members). defined a use case to maintain records through ESS personal information workset. so, a new button with name beneficiaries is seen on portal. however, these beneficiari
-
I'm running FCPX on a 2 year old Mac Pro with two graphics cards feeding two HDMI monitors and a Sharp HD TV. In FCP7 I was able to monitor my output on the TV, (connected to an ATI Radeon HD 5770 graphics card), via an HDMI cable. Now that I've sw
-
How to replace a FieldObject datasource from a DBField to a FormulaField
Hello, Did somebody experience replacing a field from the database by a formula using the RAS JDK ? It looks difficult, I can't find a clean solution: 1) Change the Datasource property of the FieldOject (using setDatasourceName()) --> exception: Cann