How to fix my iphone 3gs bottem row of my screen not working

a while ago i encountered my iphone 3gs screen problem. its like : workes everything but bottem row over the home button not working ... sum body please help me... i cant gt access to my fone unless i gt access to bottem row. coz my phone lock consistes 0
please some body help me in fixing this problem

Hi there kiran kirk,
You may find the troubleshooting steps in the article below helpful.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
-Griff W. 

Similar Messages

  • HT4623 how to fix my iphone 3gs after ios 6  ?there is no sim card install in the iphone you ar attempting to activate

    how to fix my iphone 3gs after ios 6  ?there is no sim card install in the iphone you ar attempting to activate

    Hello James,
    Thank you for the details of the issue you are experiencing with your iPhone.  I recommend following the steps in the article below if you are getting the message "No SIM" when your SIM card is installed:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?

    Are you connecting your iPhone directly to your PC or to a USB hub?

  • I have an iphone 3gs in which sleep/wake button not working. i have got stuckn  in an apple logo in my phone screen. is there any software or any solution to turn on or restore my phone??

    i have an iphone 3gs in which sleep/wake button not working. i have got stuckn  in an apple logo in my phone screen. is there any software or any solution to turn on or restore my phone?? Please help...and thaks in advance

    The Basic Troubleshooting Steps are:
    Restart..  Reset..  Restore from Backup..  Restore as New...
    Try a Reset of the Phone... You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    The Apple logo will Appear and then Disappear...
    Usually takes about 15 - 20 Seconds...
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • How to fix mac os x 10.8 mountain lion HDMI not working

    how to fix mac os x 10.8 mountain lion HDMI not working

    You can't install OS X on a PC. Buy a Mac and you can install Windows on it in a second partition.

  • Badly need your help: How to fix my iphone 3gs restoration problem

    it's been for a month now that i could not use my iphone 3gs.  i encountered some problem which i have difficulty to fix or resolve the problem: Currently my iphone 3gs is in recovery mode (which it seems got stucked). When I plug my iphone to restore it via itunes the message appeared as follows: The iPhone"iPhone" could not be restored. An unknown error occurred (1).  I already tried to search the web but could not find any suggestion how to fix it.  If there's anymore that encountered the same problem, I highly appreciate if you could assist me step by step.  By the way, i bought my iphone 3gs "open or unlocked", so I don't jailbrake.  thanks.

    You could try to use another USB port, check your security software settings or see if you can restore on another computer.
    iTunes for Windows: Troubleshooting security software issues

  • IPhone 3GS with iOS4 - voice control does not work any more

    Hi - I updated the OS of my iPhone 3GS to iOS4 and everything went well. But ever since I did the update the voice control comes back with strange results when I try to use it. It was working well enough with OS3. Has anybody the same problems and is there a solution?
    Thanks,
    Klaus

    I'm experiencing basically the same as teardrop3d. I'm Australian (with voice settings on English (Australian)) and my 3Gs had at least 90% accuracy with both calls and music requests.
    On iOS4 I've had a single correct result out of at least 30 attempts at using it.
    Requesting "play playlist <name>" will often either start calling a seemingly random person from my phone book (different each time anyway) or sometimes a seemingly random number (I don't know where the number comes from, it's not in my phone book). Sometimes it'll actually offer to play music, usually a specific artist (not a playlist) and occasionally a playlist (but so far never the right one).
    Requesting "call <name> <number type>" has worked once correctly, but usually just tries to call a seemingly random number from my phone book (or a number I don't know, not in my phonebook...).
    As teardrop3d notes, the voice control screen stays up for about 2-4 seconds after I finish talking. It doesn't seem to be recording during this time, as the waveform stops responding to my voice but the screen sits there (with words moving past in the background still) as if its waiting for me to keep talking.
    I've tried talking in different accents to no avail, and didn't get any better results with a different English language setting on the Voice Control (I'm not sure if that's actually listening for different accents or just responding in a different accent?)
    This feature which I used to use multiple times a day to avoid having to take my phone out of my pocket while walking/riding is now useless. I continue to test it each day to see if it ever works, or if there are any behaviours that change it (e.g. locked vs unlocked or with music playing/not playing when I press/hold the mic-button, etc) but so far haven't found any workarounds.

  • Syncing iphone 3GS with my Outlook 2007 calendar not working

    I recently updated my iphone software and itunes software. Since done, I now cannot sync my calendar. It is grayed out in itunes. Contacts, music, photos etc are all go, but not the calendar. Does anyone have a fix please??

    OK...there are several different KB's with troubleshooting instructions...but they are pretty numerous...I suggest you go here:
    http://www.blackberry.com/btsc/microsites/microsit​e.do
    and search on something like "calendar sync fail" and inspect the various results...something there might be helpful to your situation. You can refine the search terms to something even more specific to your situation.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I put my micro simcard into my iphone 3gs and my 3g service is not working. it was in a pantech and i do not know why it isnt working what should i do to get it to work

    what should i do i have been trying to look it up but no answer to my problem yet

    Hi there riverjay,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    -Griff W. 

  • How to fix the problem in the home button , it's not working.

    I notice few weeks ago that the home button is not responding as it should be.
    It’s really killing me and I want to destroy my IPhone.
    I’ve already re-activated the home button but there is no use of that.
    I am in middle east and I got my white I phone 4 by shipping in internet.
    So what to do now?

    Should be under warranty take it back to any Apple store and they should clean the dust or debrib from it, remember to make an appointment first to see a Genius. (it's what I did)
    Hope you get it all sorted and all is fine.
    @it

  • Does anyone know how to fix my 2010 macbook air the keyboard and mouse not working

    keyboard and mouse not working on macbook air ?

    Hi aaphillylawyer,
    Welcome to Apple Support Communities.
    The article linked below provides some general troubleshooting tips that may resolve the issue with the keyboard on the MacBook Air.
    Mac OS X 10.6: If keys on your keyboard don’t work
    http://support.apple.com/kb/PH6748
    I hope this helps.
    -Jason

  • IPhone 3GS Trash Bin Icon in Mail not working after update to 3.1

    Has anyone encountered the same problem that the Trash Bin icon inside the Mail apps no longer works since after (in seems) the update to 3.1?

    No, I haven't noticed. Mine works fine.
    All I can suggest is the standard troubleshooting steps in order.
    Restart your phone: Press and hold the Sleep/Wake button for a few seconds until a red slider appears, and then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    Reset your phone: Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
    Restore your phone: Restore: http://support.apple.com/kb/HT1414

  • My iphone 3gs is frozen and reset does not work.  What can I do?

    Apple logo won't go away.  I have tried a reset (holding both buttons and restarting the phone) several times.  I don't get the screen to connect to itunes.  Just keeps going to the apple logo and won't go past that. 

    Steve, have you tried just going through the unlock form here?
    http://www.vodafone.co.uk/vodafone-uk/forms/unlock-code-request/
    That's what the moderator in several older threads in Vodaphone's forum said was all that is necessary. Carriers often won't unlock for anyone but the original account holder, so if you don't have the details of the company's account, that might be the barrier in which case there will not be any way to get the iPad officially unlocked.
    Good luck.

  • How can i fix my iphone 3gs, could not activate after restore

    how can i fix my iphone 3gs, always appear, could not activate after restore

    When you say activate what do you see?

  • How long does restoring iPhone 3GS take in recovery mode through iTunes?

    how long does restoring iPhone 3GS take in recovery mode through iTunes?

    You are right there as a weard issue try with the battery comes out and then try to connect to the itunes should be working properly, if not fix the power on/off button because are escential to do it.

Maybe you are looking for

  • Automatic Payment Program making payment in part

    Hello Friends, I know that this question have been asked before but could not found a suitable answer in SDN search. I want to know is there any functionality introduced by SAP in ECC on enhancement pack for the partial payment functionality in F110.

  • Upgrading from EBP 3.1 to EBP 5.0

    We are running EBP 3.1 and plan to upgrade to EBP 5.0. Current EBP details: EBP 3.1 SR1 BBPCRM Support package 14 ITS 610 Requisite Bugseye 3.5 Backend R/3 version: 4.7 SR1 extension set 2 Backend PI version: 2004_1_470 Using blended-codepage: euroja

  • 'Edit Project' button grayed out for a project

    I have been working on a project but it stopped working all of a sudden. The 'Edit Project' button is grayed out and won't let me click on it. The movie doesn't appear in the preview pane either. More information: iMovie 11 Using MacBook Pro with Sno

  • Few Projectproperty and Listproperty fields returning empty values (CrossListQueryInfo)

    I am running a CrossListQueryInfo and the ViewFields for the CAML includes <ProjectProperty Name="Title"/> <ProjectProperty Name="Url"/> <ListProperty Name="Title"/> <ListProperty Name="DefaultViewUrl"/> I am getting empty values for Url and DefaultV

  • ISR with WebDynpro ABAP

    Hi Experts, We are building a custom HR application to automate various HR processes like New Hire, Termination, etc.. Due to certain internal issues we are unable to use the standard business package for MSS (and hence PCR screens with adobe forms).