How to fix my volume slider so i can see it on the screen
I have a dv6-1355dx and i had to restore it to the factory settings and ever since then when i try my volume slider it works still i just dont see it on the screen anymore any one that knows what this could be would help me out alot
Welcome to the HP Forum!
bpc4587 wrote:
I have a dv6-1355dx and i had to restore it to the factory settings and ever since then when i try my volume slider it works still i just dont see it on the screen anymore any one that knows what this could be would help me out alot
What is the installed operating system and version (32-bit or 64-bit)?
Do you mean the volume slider from the taskbar or the one from the audio software/
The audio driver can be found on the driver and software download section of the web support portal for your notebook. This is the page you seek. Use the dropdown to select the correct version of the installed operating system for your notebook. Right-click Computer and select properties to see which version is installed in your notebook.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer
Similar Messages
-
How to fix no volume on headset???
how to fix no volume on headset??
Have you tried a hard reset? Hold the home and top buttons down at the same time until the Apple logo shows.
-
How to fix my volume bottom ??
Hello Shiningboy,
Thanks for using Apple Support Communities.
Please take a look at the website linked to below that explains the service options for your iPhone.
Repair & Service
http://www.apple.com/support/iphone/repair/
Take care,
Alex H. -
My iphone 4s has blue bars on the screen. I can't see anything on the screen. How do I fix?
I can't see anything on the screen. I can receive calls but can't do anything on it. Help. How do I fix?
Try a reset by pressing and holding the home and power buttons until the white Apple logo appears. Ignore the slide to power off screen.
-
does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?
Hello Mokhtary123 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
A flashing question mark or globe appears when you start your Mac - Apple Support
OS X Recovery
http://support.apple.com/en-us/HT4718 -
How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!
Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy -
Hello,
I was wondering if anyone can tell me how to fix my iTunes. When I tried to update to the latest version (1114) a window popped up saying R6034 C runtime library incorrectly installed. Then another window popped up saying that iTunes was installed incorrectly Error 7 (windows error 1114). Hope you can help.Solved the issue without using the trash . I tried to consolidate the library in LACIE, then clicked on any exclamation-mark song and tried to locate the file. Repeating those steps 3 or 4 times cleared it up. That was confirmed when I synced the entire library on a iPod Classic, and showed up no problems after syncing the Nano.
What went wrong was perhaps to fail to consolidate the library at first . -
My video app that is preloaded on the IPAD will not open. all I can see is a blank screen. Does anyone have any suggestions on how I can fix it?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]] -
I have a MacBook Pro with Lion Preinstalled, so AHT was present on the hard disc and worked when the product was new. One of the first things I did from new was run AHT and it worked fine. But now it doesn't start - instead the machine (eventually) boots into normal OS X.
Holding down "D" no longer starts Apple Hardware Test! Any idea what's happened and how I fix it? Or do I need to go to the Genius Bar?
Software Mac OS X Lion 10.7.3 (11D50b), if it makes any difference.
Any ideas?Thanks. However, even with an internet connection that doesn't work for me - the machine just (after an extended delay) boots normally. It doesn't download.
Option-D works for an Internet-based AHT. However that only works with an internet connection. It doesn't seem to download it and install it - it needs internet every time.
Any idea how my local copy of AHT disappeared? I haven't repartitioned the drive or knowingly deleted anything. And how do I reinstate it (because if you need AHT your hardware problems may preclude internet access!)? -
my ipad 2 freeze up and i've tried to reboot it, but it can't works. and the screen is black look alike reboot.how to fix it?, my ipad 2 freeze up and i've tried to reboot it, but it can't works. and the screen is black look alike reboot.how to fix it?
Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..
Hi LamboMong,
just try this:
http://refit.sourceforge.net
install, reboot twice and choose the Windows-Partition on next startup.
(The apple-bootloader doesn't display all bootable harddisks.
With rEFIt you can boot from all partitions/harddisks on your computer.)
I hope that will solve your problem.
Daniel Fernau -
How can I find out the screen size of the users moniter using the Acrobat SDK?
How can I find out the screen size of the users moniter using the Acrobat SDK? I need to know how much sreen real estate that is available on the users moniter. Is there some call that I can make from the SDK to discover the maximun X and Y coordinates?
Thanks,
GregoryCurrently, I am testing on multiple moniters and it is defaulting to the moniter designated as the #1 moniter. For our purposes, this is acceptable. Once the two documents have loaded, the user can move and re-size at will.
Gregory -
How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.
Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though. -
I back up my iphone's icalendar to my MacBook. Why have some previous events disappeared in the phone but I can see them on the backup? How do I retrieve?
Did you back it up to the cloud?
-
Sorry I'm new to Final Cut Express. How do you make an image (jpeg file for example) move across the screen slowly as I've seen in many films.
Neil from bristol wrote:
… How do you make an image … move across the screen …
by setting KEYFRAMES
(read, what FC/e's built-in Help-feature tells about it)
resize and set pic to start position
set keyframe
move playhead in timeline to desired length
set pic to end position
set keyframe …
Maybe you are looking for
-
Error while deploying, Custom Style Skin in OBIEE 11.1.1.6.7
Hi, I have deployed Custom Style Skin in OBIEE 11.1.1.5 successfuly (with the help of http://www.rittmanmead.com/2010/12/oracle-bi-ee-11g-styles-skins-custom-xml-messages/ ). Now when we're moving RPD, Catalog & Custom Style Skin from OBIEE 11.1.1.5
-
Exception in OSM 7.0 when XSLT Automator received message from JMS
Hi I have been prototyping on OSM 7.0 on Linux. I have a simple project, with two "Automated tasks" and some manual tasks. The first Automated task is using a XSLT Sender, and sends a message to a JSM queue "A". The second Automated task is using a X
-
Control report program by using pushbuttons
Hi Experts, I need to create a selection screen with text boxes, radio buttons and Push buttons. Whenever I enter some value in text box and press the PUSHBUTTON, the report should upload one file from local drive(like D: C: or Desktop) and need to u
-
What is the best product for me?
Next year I will be a college student and want an apple product that can be my notebook. I currently use OneNote on a Toshiba tablet, but want to upgrade to apple. I know that apple does not make a tablet, but I figured I could get an ipad with a sty
-
How two create UPDATE FUNCTION MODULE
Hi, I have 2 tables to update one after the other... I have geard it is advisable to use update function module for this.. can any1 tell me how to create and work with update function modules... Answers will be rewarded....