How to fix New Bose SoundDock Portable not working with iPhone 4s?

I am having trouble working with my Bose SoundDock Portable with my iPhone which i bought on monday.
I have a iPhone 4S running on iOS 5.1.1 and nothing is working. Not charging nor playing music. Thought it was going to be as simple as plug and play. So annoying.
I've tried turning my phone off & on = NOTHING
I've tried removing the universal adapter to test if it had been a connection problem = NOTHING
It had been suggested in other forums to check if the 30 pin dock connector on your iPhone was clear. Clean and tested = NOTHING
I'm starting to think
A) Its the new update of iOS 5.1.1
or
B) Its a faulty Bose product.
Both Bose and Apple website both confirm that the iPhone 4S is compatable with Bose SoundDock Portable.
http://worldwide.bose.com/axa/en_au/web/sounddock_portable/page.html
http://store.apple.com/au/product/TP573PA/A?fnode=MTY1NDA5Mg&fs=m.manufacturer%3 Dbose
Is there anyway to fix this?

Thank you so much for sharing.
I had the same experience, now tried to reinstall iTunes et voilà.
Looked for suggestions around several forums but nobody suggested this.
And it works.
Thank you again.

Similar Messages

  • New Applications model DOES NOT work with StandAlone OSD media

    If you are able to create StandAlone OSD media, the new Applications model DOES NOT work with it.
    - The creation of the media will be successful
    - The application installation itself will be successful
    Yet after the application is installed, it shows the correct process it needs to complete based on the return code in AppEnforce log, but does not process that information back to the the TS Manager so it appears to attempt to download a policy which fails
    causing the task sequence to error out..
    Thanks,
    Squirre1

    It is very similar to this description:
    http://madluka.wordpress.com/2012/05/15/error-0x8000405-when-installing-applications-to-a-workgroup-system-during-build-and-capture-task-sequence/
    It is using the application model, since it is not attached to the domain it is on a workgroup. But it is on standalone media and not during a build and capture sequence, it is during an OSD. But alot of the same puzzle pieces fit. Basically pointing to
    the new applications model not working during standalone OSD when the MP is not available. i would say that not enough information is getting encapsulated into the Application when exported onto the StandAlone media.

  • $80 Apple in-ear headphones not working with iPhone 4

    I spent $80 on a pair of in ear headphones and they do not work with iPhone 4. I can listen to music and talk but the volume controls are completely nonfunctional. So I used them on my friends 3GS and they work fine. How can Apple come out with a new phone that wont work with their own products? I used to love Apple until this F@#$ing iPhone 4 came out.

    According to Apple, they should work with the 4... http://store.apple.com/us/product/MA850G/A?fnode=MTY1NDA1MA&mco=MTM3NTM0Mjg
    Are they plugged in to your iPhone all the way?

  • Appletv remote app and airplay not working with iphone 4S

    I have the latest appleTV.  I have the remote app loaded onto my ipad3 and iphone 4S.  The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV.  It used to work.  I have deleted and reloaded the app, and still nothing.  It worked fined until a month ago or so.  I have enabled home sharing.
    The app and airlplay are working just fine with the ipad3.  I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router.  I don't think this is the issue, because it worked before.
    Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC.  Nothing seems happed on the computer when I enter the code.  Could this have anything to do with recent appleTV or itunes updates?  Any possible solutions?

    It seems like I am having the same problem.
    I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
    (1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
    (2) iMac not Airplay to AppleTV
    (3) Airplay Mirroring not working
    The following are done:
    - Home sharing enabled
    - To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

  • My Health Kit Is Not Working With Iphone 5.

    My Health Kit Is Not Working With Iphone 5.

    Iphone 5 Is Not Supported With Helath Kit That Mean Steps Walking Distance Will Not Work

  • HT6154 paired Jawbone not working with iphone 5C

    Paired Jawbone is not working with iphone 5C

    Hello Diesel vdub
    When an incoming call happens I press the talk button on the jawbone and there's no reception.
    So, I speak on the iphone.
    Today the jawbone worked correctly twice in a row, woo hoo.
    Finicky little puppy.
    Thanks for your response DVdub.

  • AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well

    AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well.
    WLAN is working, I can use Youtube on my AppleTV, but I can´t connect to my computer or use airplay on my iPhone or iPad.

    Something is not configured correctly that is creating issues with your AppleTV.  You can disconnect it from the TV and power, and then plug it into your computer with a micro-USB cable.  After launching iTunes on your computer, you will be able to restore it to default settings and upgrade the software.

  • Why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset

    why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset.

    don't know.  what have you done to troubleshoot?

  • Did 2.1 update fix the Bose SoundDock Portable Audio Problem?

    I hadn't tried docking my iPhone 3G in my Bose SoundDock Portable speakers for some time because of the commonly discussed audio 'popping' problem (at least commonly discussed back in July).
    So when I put my iPhone 3G in the dock tonight I was happily surprised by perfectly clean audio (after an hour of listening anyway). My assumption is that the 2.1 update fixed this (an old post suggested that Bose had said that a future software update from Apple would solve the problem). My two questions are:
    1) Can anyone else validate that the 'popping' problem has disappeared and/or that the fix was the 2.1 update? I searched everything I could find on benefits of 2.1, but this unsurprisingly was not mentioned anywhere.
    2) Can charging on the SoundDock be hard on the iPod's/iPhone's battery life?
    Sincerely,
    Steven
    <Edited by Moderator>

    Before the iPhone software update 2.1, my iPhone would every 3.39 seconds maka a popping sound, the screen would flash on, the music would fade then things would return to normal. I talked with Bose technical support several times about this and they said that they were working with apple to fix the problem. The problem was, that apple stoped using 12v firewire pins to charge the iphone and switched to 5v usb pins. However with the iPhone 2.1 update my iPhone was worked flawlessly in the Bose Sounddock Portable with absolutly no interferience at all. I did talk to apple about the affect of charging the iPhone in the Sounddock and they said that it would have no affect on it at all.
    Thanks,
    Eric

  • Griffin RoadTrip not working with iPhone 3G any more

    Hi,
    my Griffin RoadTrip is not working any more with my iPhone 3G.
    Always message that this accessory is not compatible with iPhone, but before, it worked and now it doesn't any more.
    (On Griffin case, it's mentioned that the accessory is designed for iPhone 3G)
    any tricks for this?
    Thx

    Mine was working fine for about 6 months.  Then, I started getting a "not compatible message."  I called Griffin and they suggested a soft reset of the iphone 4s.  The message went away but now the FM transmitter is not transmitting.  Griffin sent me a brand new one (free) but the FM transmitter still does not work.  That tells me that the iphone changed -- probably after an update.

  • Corporate Email does not work with iPhone

    I'm not a tech wiz so my apologies if this is very elementary. My IT guy said the iPhones will not work with MS Exchange on our server. We currently support Blackberry and Windows Mobile devices such as the Q, Treos, Blackjack. He did mention that my email could work through the POP server, but it wasn't secure. I've tried setting up the POP email to pull my corporate email, but keep getting the Authentication Failure message. Any suggestions on what to try?

    If Windows mobile devices can connect using ActiveSync, then your iPhone should be able to connect the same way.
    I used a HTC TytnII to sync my mail, calendar et contacts. I got the iphone and entered the exact same informations (server IP adress, user name and login) and it just worked.
    You need however to know the exact capitalization of your email adress, as described in your MS Exchange server. To know that, create a message in outlook, enter your name in the "to" field and double-click on your name. In the information box, you should have numerous tabs, and the last one gives you the capitalization (in the "SMTP" field).
    Good luck

  • What features of iOS 6 will not work with iPhone 4s?

    What features of iOS 6 will not work with the iPhone 4s?  There are over 200 added features, but what will be missing on a 4s that you will get with a 5?

    All of the features will work, however, some features wont work depending on what country you live in. If you life in America, canada or the UK you dont have to worry about anything

  • Help I cannot get on to itunes. It comes up with the message that msvcr80.dll is missing. But i need very straight forward instruction s how to fix this as I am not good with computers.

    Help I can no longer access my I tunes from my computer. It comes up with the message MSVCR80.dll is missing. Can anyone give me very simple instructions as to how i can fix this. I am not very computer literate.

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?

  • I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

    I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

    You're welcome. 
    But, no, don't look to  Epson for fixes to their  driver in newer versions, and Adobe has deprecated the TWAIN plug-in.  Hoping for a solution there is futile.  That has not happened and it's never going to happen.  The consensus is that it's pretty foolish to tie up Photoshop to scan.  Honestly.
    Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
    You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever.  When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software.  If you think about it, its most inefficient.
    VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist.  VueScan is not free, but it's a pretty good value, IMO.
    As for the Epson CD printing software, I have no clue.  Sorry. 

  • New version of iTunes not working with itunes library

    I installed the new iTunes 8.0 and now when I try to open iTunes, I get an error message--"the file itunes library.itl cannot be read because it was created by a newer version of iTunes." What does that mean, how can i make iTunes work with my new Nano?

    I have I tunes on both the laptop with WindowsXP and on the
    newly acquired Desktop, HP Q 8200 with Vista 64.
    For the latter I have downloaded the latest recommended
    version for Vista64, but even though I can see the imported
    and saved ( on an external hard drive) play list I can not
    play them. When I click on them on this new Vista 64
    empowered Desktop, nothing happens.When I click on
    Beethoven folder ( which contains many creations by
    composer) I can see nothing in the right panel regarding
    the overture, for example.
    On the laptop I have exactly the same play list and all
    works fine there.
    Audio is OK, because when I go to the I-tunes store with
    the desktop, I can listen to the songs.
    Any solutions????

Maybe you are looking for