How to fix NIS domain name not set after upgrade

I finally updated after thousands of years. As pacman was spewing, I noticed that it moved /etc/conf.d/nisdomainname to .pacsave. Uh, whatever, says I. Must be a package issue. So I just reboot...and of course ypbind can't connect to anything because nisdomainname isn't set.
Just cd to /etc/conf.d and mv nisdomainname.pacsave nisdomainname
Then it will work again.

start here with the knowledge base + FAQ plus forum.
https://communities.vmware.com/community/vmtn/fusion

Similar Messages

  • Console message - Domain name not set

    Opened console and get "Domain Name not set" message every 10 seconds or so - the anther from .ypbind.
    What do I shut off, set or fix?
    Thanks.
    Tom

    I found that deleting the file /etc/domainname fixed the problem. Apparently this file is a leftover from a previous version of OS X.
    If you search the Leopard discussions for "ypbind" you will find other solutions, such as disabling ypbind in /System/Library/LaunchDaemons/com.apple.nis.ypbind.
    Bill

  • Artist Names not Displaying after upgrade to 10.1.0.56

    I just upgraded to iTunes 10.1.0.56. After the upgrade, about half of my artist names are not appearing. When I click, "Get Info" it can find the artist and some.
    Has anyone else experienced this? Any thoughts on what to try next?
    Thanks

    Hi,
    I am also facing the similar problem. Could u please update on forum if you got the resolution for that same. Whatever environment u have mentioned the same environment I am using and getting the same stack trace. I think during activity creation some error is coming but don't know why?

  • How come my Iphone4 ringer is not working after upgrading to iOS 5

    I recently updated my iphone4's firmware to iOS 5. I just found out that my ringer is not working anymore. It seems like it's always in silent mode. I tested music and it worked fine. Please help...thanks in advance

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Postfix relay=none, ... status=deferred (Host or domain name not found...

    Hi,
    I actually posted this question 2 weeks ago but under the wrong topic. So, first of all wanted to apologise for double-posting... but since no one replied, I thought I'd try again under the right topic.
    I've been trying to solve this all day today (that was Feb 26th). I used to be able to send emails but for some reason it does not work anymore. At first I thought it was a problem with php (I use entropy pack php 5.2.6) but after searching the topic, I think it is a problem with my network. BTW OS is 10.5.5 and Postfix version 2.4.3
    First of all, after computer restart, I don't think postfix starts automatically
    Running 'sudo postfix start' gives me:
    postfix/postfix-script: starting the Postfix mail system
    Looking at '/var/log/mail.log' I find:
    Feb 27 12:51:04 AMs-MBP postfix/qmgr331: AA70A7A7C77: from=<[email protected]>, size=842, nrcpt=1 (queue active)
    Feb 27 12:52:19 AMs-MBP postfix/smtp456: AA70A7A7C77: to=<[email protected]>, relay=none, delay=3437, delays=3362/0.02/75/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=email.com type=MX: Host not found, try again)
    Running 'sudo postfix check' does not give me any errors
    Checking my '/etc/resolv.conf' it has nameserver 192.168.1.1
    Running 'ifconfig | grep netmask | grep -v 127.0.0.1 | awk {'print $2'}L' gives:
    192.168.1.5
    Checking http://switch.richard5.net/2006/08/19/fatal-open-lock-file-pidmasterpid/ and running 'launchctl list' gives me a long list but no item matches org.postfix.master
    Running 'ps aux|grep postfix' gives
    AM 546 0.3 0.0 599820 468 s000 S+ 1:41pm 0:00.00 grep postfix
    _postfix 331 0.0 0.0 599816 824 ?? S 11:56am 0:00.04 qmgr -l -t fifo -u
    root 329 0.0 0.0 600784 752 ?? Ss 11:56am 0:00.11 /usr/libexec/postfix/master
    _postfix 519 0.0 0.0 599768 752 ?? S 1:36pm 0:00.01 pickup -l -t fifo -u
    Running 'postconf inet_interfaces' at first gave me
    inet_interfaces = localhost
    which I changed to All in '/etc/postfix/main.cf'
    I looked at http://www.postfix-book.com/debugging.html
    Running 'telnet localhost 25' gives me
    Trying ::1...
    telnet: connect to address ::1: Connection refused
    Trying fe80::1...
    telnet: connect to address fe80::1: Connection refused
    Trying 127.0.0.1...
    Connected to localhost.
    Escape character is '^]'.
    220 AMs-MBP.local ESMTP Postfix
    quit
    221 2.0.0 Bye
    Connection closed by foreign host.
    But running 'telnet 10.1.2.233 25' gives me
    Trying 10.1.2.233...
    telnet: connect to address 10.1.2.233: Operation timed out
    telnet: Unable to connect to remote host
    Running 'ping 134.169.9.107' takes a long time. After a while I stop it and get:
    PING 134.169.9.107 (134.169.9.107): 56 data bytes
    ^C
    o
    + 134.169.9.107 ping statistics ---
    28 packets transmitted, 0 packets received, 100% packet loss
    I have not idea what the problem is and/or how to fix it. I know the messages get to the postfix daemon but for some reason they do not continue on their way.
    Please, does anyone have an idea of how to fix this?
    TIA,
    Elle

    Dynamic IP addresses with DynDNS Updater (or equivalent) makes it pretty darned reliable, particularly if you buy DynDNS' Mailhop Forward service, which prevents the likes of roadrunner.com and aol.com from blocking mail coming from your server just because it lives in dynamicIP-land. Way cheaper than paying your ISP extra for a static IPA, too, and totally acceptable for low-volume, residential-based servers for personal not-for-profit use.
    Regarding reliable delivery to a dynIPA server, you are only at risk of non-receipt for perhaps a few minutes immediately following when your ISP rotates your WAN IPA, until DynDNS Updater (or equivalent) updates the DynDNS (or equivalent) servers with your new WAN IPA. But that's really not a problem because I think all, well, okay, most, smtp servers will queue for a redelivery attempt if the initial delivery attempt just happens to occur at that time.
    I wouldn't suggest this practice for high-volume enterprise-class servers or for people trying to run a bootleg mail server business for profit (besides, the ISP would shut it down as an abuse of terms of service, anyways), but for low-volume, residential-based servers for personal use and enjoyment, which I suspect is the case for the O.P., I can't say that I find anything unreliable about my dynamic IP-based mail server.

  • How to change (NT)Domain Name after installed ERP?

    Hello,
    We are planning to change (NT) Domain Name on environment of already installed ERP/BW(WAS 6.40)/SRM/SolMan(NW 7.0).
    We know SAP recommend that customer should be Re-install or System-copy SAP-System if the Domain name is changed after installed systems.
    However, we do not have enough time and budget for doing that.
    Questions:
    1). If the (NT) Domain name will be changed, we only need to change the
    OS users of service for SAP-System?
    (I think that it is needed to change only OS-users of SAP-service. Is there other setting for that?)
    2). The method of only changing users of SAP-service is not supported in this case?
    (The customer will be not taken the SAP-Official support after doing that?)

    Dear
    Changing domain name is not supported by SAP if done in a productive environment (after systems have gone live).
    You will probably not get support by SAP after you change the domain name once system is live.
    There are a bunch of changes you will need to perform as well.
    The domain name is probably existing in the RFC's and you cannot change all of those through SM59.
    You will need to update those entries at Oracle level.
    SAP parameters containing domain name
    Java environment where domain name is contained
    Reset hostname buffer
    Service marketplace
    SAP Logon
    STMS
    Monitoring perhaps, non SAP job scheduling
    Please reward points accordingly
    Kind regards
    Tom

  • I want to know how to use my domain name in business catalyst

    please I want to know how to use my domain name in business catalyst

    Hello marionussen,
    This issue of your's is specific to Buisness Catalyst and me have a forum for Buisness Catalyst. I would suggest you to post your query to forum: http://forums.adobe.com/community/business_catalyst for help.
    Let me know for any further query.
    Regards,
    Ratandeep Arora

  • How To Fix "This accessory is not optimized for this iPhone" Error?

    How To Fix "This accessory is not optimized for this iPhone” Error?

    Clean the iPhone dock port with a clean dry tooth brush. If the warning occurs again, clean the dock port very carefully and thoroughly with isopropyll alcohol, especially the pins which are on top of the dock mid rib. If still warning, then take iPhone to Apple for Warranty service.

  • Technical details of permanent failure: DNS Error: Domain name not found

    I have tried to test eprint and keep getting an error.   DNS Error: Domain name not found
    I can print thru my network fine, but I get this error with eprint.  My eprint address ends in hpeprint.co
    Is this correct?

    Found the problem. The printer display shorten my eprint address and dropped the "m" from com. Now to enjot my HP eeprinter.

  • TS1424 how to fix your purchase could not be completed

    how to fix your purchase could not be completed
    I'm trying to buy a money for game /but I get this message every time when I trying to buy something so please can you help me guys
    And I appreciate your time Thank you
    Adres rahana

    If you are also getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why you are getting the message) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How to fix error charging is not supported with this accessory (iphone 3gs)

    how to fix error charging is not supported with this accessory (iphone 3gs)?

    This can mean there is some dirt, lint, or foreign material in the iPhone's dock connector port and it doesn't take much, or the dock connector port has damage with the pins or there is some moisture damage.

  • How to fix "The iPhone could not be synced because the sync session failed to finish..."

    How to fix "The iPhone could not be synced because the sync session failed to finish???

    Open itunes and connect iphone to itunes, syncing (=failed), exit itunes without unplugging and then open itunes again. if this doesnt work, uncheck apps & photos, sync again, before finish syncing stop it, then check it again.

  • How to fix iphone 4s wifi grayed out after update ios 6.1.3

      how to fix iphone 4s wifi grayed out after update ios 6.1.3 ?
    for this problem , I try to fix several ways that hope can fix . it come form internet , youtube ,some one told , such as use lamp app , airplane mode , and freezing but it can not work anymore .

    http://support.apple.com/kb/ts1559
    After following the steps included with the link provided, if you are still unable to turn Wi-Fi on, please contact Apple for support and service options.

  • How to Fix the iPhone 4S Wifi Problems After  8.2

    How to Fix the iPhone 4S Wifi Problems After  8 2 its grayed out

    I suggest you describe the problem in more detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received. Telling us you've tried ""all the methods mentioned in the forums" does not help.

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

Maybe you are looking for