How to fix no of question for specific test

Under the Test Sections, there is field "no of question", although i have map no of question with the question bank is 100 but i just want it to display on 10 every time .
could you pls advice, how to do this.

Can you clarify if you have this test set up as a Rule-Based or Pre-Selected test (main test properties page)?
With a rule based test, when you add test items to a section, you choose a test bank and the number of questions you want to pull each time from that test bank. So if you have a test bank of 100 questions and you want it to randomly pull 10 each time from that bank, you enter 10 in that field.
With a pre-selected test, when you add test items from a test bank, you have to choose the specific questions that will appear.
Hope that helps?
Scott
http://www.seertechsolutions.com

Similar Messages

How to fix applepushservice.dll issues for downloading iTunes on Windows 7 64 bit

I recently had iTunes crash on my home PC, Windows 7 64-bit. I have tried several attempts to uninstall and reinstall the program and it still does not work and I receive error messages. The latest: The program can't start because ApplePushService.dll is missing from your computer. Try reinstalling the program to fix the problem. Problem is, the articles that I have seen state this is an Unknown source and my firewall will not allow it to be installed. The original error was a Windows Error 7 (registry & .dll issues). Any suggestions on how to fix this problem?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How to fix the " flashing question mark after the finder icon when starting up" withou an apple keyboard?

Hi
I am wondering How to fix the " flashing question mark after the finder icon when starting up" without an apple keyboard. I have 2 of those .7Ghz emacs so just wanna fix them
Thx

Hi,
>I am using a wireless standard keyboard so maybe the emac doesn't regognise it
Installation of driver software may be required. Do not expect any wireless device to automatically work with a Mac unless guaranteed to do so. In a case like this, use a wired USB keyboard (a PC keyboard should be OK) and a wired mouse to begin with.
>I have installed Ubuntu 13.00 on the HDD from another computer.
Is it a version for PowerPC?
https://wiki.ubuntu.com/PowerPCFAQ
https://wiki.ubuntu.com/PowerPCDownloads
>a list of eMac hotkey's that can be used before OS boot from a standard Windows keyboard?
Could the following article be of interest?
http://support.microsoft.com/kb/970299
If/when starting from a bootable CD, press and hold the C key.
Jan

A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.

Hi 22chill,
I recommend that we delete and re-download the movie from your purchase history:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M.

How i fix the error 1015 for my iphone3g coz my phone i opining

how i fix the error 1015 for my iphone3g coz my phone i opining and also i can use since i face that problem

Yes, if it has been jailbroken, then there is probably nothing that you can do and you will never be able to use it, so ditch it and buy a new phone.
If it's an iPhone 3g, then it is a very old phone anyway and you shoud consider buying a new one.

HT5312 How to reset my security questions for my Invoice2go

How to reset my security questions for my Invoice 2go

Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

How to check the tran code for specific activity.

Hello friends ,
could you please let me know how to check the tran code for specific activity . AS in table , i can check , what transaction does what ? But now i need to check the transaction for specific activity .
E.g , For Administrator workbench , there is transcation like RSA1 .
thanks in advance
Regards

Hi,
try the TSTC table with SE16.
Hope it helps,
MG

How to avoid the repeting question for autorisation of my computer (only for movies)

Hallo,
Does anyone know how to avoid the repeting question for autorisation of my computer?
This happens only for movies that I bought.
Hopefully someone can help me out.
thx,
Frederique

Open itunes, Click Itunes, Check For updates

How to fix " insufficient disk space for encoding" on DVD STUDIO PRO 4

I keep getting the error message, "insuffiecient disl space for encoding" on DVD STUDIO PRO 4. I reinstallled the program, uptaded software and also cheked the library receipts file. After the reinstall I am still getting the same message. Can anyone tell me how to fix this?
Thanks

Thank you for you help, however I think you misunderstood my question
I have 800 gb on my Mac hd
I am getting this error message when I go to build and format the dvd. This is after compression encoding.

How to apply Software Restriction policy for specific user in local group policy object ?

I am working on implementing user based software restriction policy programmatically for local group policy object.
If i create a policy through Domain Controller,i do have option for software restriction policy in user configuration but in local group policy editor i don't have option for that.
When i look for the changes made by policy applied from Domain Controller in registry, they modifies registry values for specific users on path HKEY_USERS\(SID of User)\Softwares\Policies\Microsoft\Windows\Safer\Codeidentifiers
They also have registry.pol stored in SYSvol folder in Domain Controller. When i make the same changes in registry to block any other application, application is getting blocked.
I achieved what i wanted but is it right to modify registry values ?
PS:- I am using Igrouppolicyobject API

I achieved what I wanted but is it right to modify registry values ?
You also can modify a registry programmatically based policy. Check this:
http://blogs.msdn.com/b/dsadsi/archive/2009/07/23/working-with-group-policy-objects-programmatically-simple-c-example-illustrating-how-to-modify-a-registry-based-policy.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to fix different execution plan for different bind variable values?

Please find the below query. The execution plan is fine. The problem That I am facing is in some cases for different bind variable values execution plan gets changed and degrades performance. I have used 6 tables here and all of the tables have histogram on all columns. Database version is Oracle 10g and the value of method_opt is 'For all columns size auto'
SELECT l.LineNumber INTO :b0
FROM Lines l ,LineVersions lv ,Statuses s
WHERE (((((((((((l.serviceContractId=:b1 AND l.LineId<>:b2)
AND lv.LineId=l.LineId) AND lv.StatusId=s.StatusId)
AND s.Code IN ('EPR','ERE','EEP','ERP','PRP','PRD','AAC'))
AND NOT (s.CODE='AAC' AND lv.activeto<TO_DATE(:b3,:b4)))
AND lv.EquipmentDetailId=:b5) AND lv.RouteDetailId=:b6)
AND (lv.cargoDetailId=:b7 OR lv.cargoDetailId IN
(SELECT i_cd1.cargoDetailId
FROM CargoDetails i_cd1 ,CargoDetails i_cd2 ,CargoCommodities i_cc1 ,
CargoCommodities i_cc2 WHERE
((((((i_cd2.cargoDetailId=:b7 AND i_cd1.cargoDetailId<>:b7)
AND i_cd1.ServiceContractId=:b1) AND i_cd1.cargoTypeId=i_cd2.cargoTypeId)
AND i_cc1.cargoDetailId=i_cd1.cargoDetailId)
AND i_cc2.cargoDetailId=i_cd2.cargoDetailId)
AND i_cc1.commodityId=i_cc2.commodityId))))
AND ((lv.customerGroupId IS NULL AND :b11=0) OR lv.customerGroupId IN
(SELECT cgm1.customerGroupId
FROM CustomerGroupMembers cgm1 ,CustomerGroupMembers cgm2 ,CustomerGroups cg1
WHERE (((cgm2.customerGroupId=:b11 AND cgm1.customerNoId=cgm2.customerNoId)
AND cg1.CustomerGroupId=cgm1.CustomerGroupId)
AND cg1.ServiceContractId=l.ServiceContractId)))) AND lv.linetype='C')
AND ROWNUM=1)
After searching in several blogs I have found the below solutions. Please see it and let me know it is correct or not
Solution 1:-Get rid of histogram that does nothing but messes up execution plan by giving below command
exec dbms_stats.gather_table_stats(owner, tablename, method_opt => 'for all columns size 1', cascade => true);
As 6 tables are there I need to execute above command 6 times.
Solution 2:- Use stored outline. Not sure how to get the best execution plan.
I am looking for answers ASAP. Thanks in advance

As you have probably read, bind variables and histograms do not mix well.
Histograms suggest that you have skew in your data such that different values should get different plans
Bind variables exist so that SQL with different supplied values can be shared.
Mix the two together and at parse time with bind variable peeking you get plans for specific values shared for all values.
The solutions you have mentioned are the common approaches, together with a third - use literals not binds if you've got data skew (i.e. your histograms are justified) and don't want shared SQL.
I would have thought that getting rid of some of these histograms may be the right approach if you're none of your application SQL is using literals to benefit from them.
Can you confirm your version of Oracle.
Further reading:
http://jonathanlewis.wordpress.com/2009/05/06/philosophy-1/
http://structureddata.org/2008/03/26/choosing-an-optimal-stats-gathering-strategy/
http://richardfoote.wordpress.com/2008/01/04/dbms_stats-method_opt-default-behaviour-changed-in-10g-be-careful/

How can I access user permission for specific items in Sharepoint 2013 via REST API?

I want to access user permissions for specific items like lists, documents, folders etc. via the REST API.
Currently I am hitting the following endpoint:
http://win-5a8pp4v402g/sharepoint_test/site_1/_api/web/getUserEffectivePermissions('win-5a8pp4v402g\\Sharepoint User 2')
However the response looks like this:
"d":
"GetUserEffectivePermissions":
"__metadata":
"type": "SP.BasePermissions"
"High": "0",
"Low": "0"
I cant understand why high and low are both 0? I have added the user to a specific group. Also this is the same result for each of the users. Another thing to note is that I havent added the "Guest" user in the sharepoint server. So when I hit the endpoint for the Guest user, it still shows the same response. So I know there is something I am doing wrong.I want to access permission of a user for a specific item, say a document using the REST API. Can someone tell me how? What would be the endpoint?

Thanks for the reply. Although this works for Lists, I need to get permissions of documents too. Here is what I have tried:
http://win-5a8pp4v402g/sharepoint_test/site_1/_api/web/GetFileByServerRelativeUrl('/sharepoint_test/site_1/Documents/file1.txt')/GetUserEffectivePermissions(@user)?@user='i%3A0%23%2Ew%7Cwin-5a8pp4v402g%5Csharepoint%20user%201'
And the response is:
"error":
"code": "-1, Microsoft.SharePoint.Client.ResourceNotFoundException",
"message":
"lang": "en-US",
"value": "Cannot find resource for the request GetUserEffectivePermissions."
Clearly this doesnt work for a file. Whats wrong?

How can I allow popups only for specific sites in Safari 7.1?

I have popups blocked by default, but need to allow them for specific sites at work. How can I do this without allowing them for all sites?

Hi ..
It's all or nothing with Block pop-up windows selected in Safari > Preferences > Security.

How to fix a download error for itunes on an iphone?

How can one fix a "download error" for itunes on an iphone?

Hi..
First, try resetting your iPhone.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
Then restart the device. Hold the power button until "slide to power off" appears. Slide to power off. After it is off, press the power button to turn it back on.

How to restore Project from repository for specific date ?

Hello,
I have Web Dyn Pro Project. Some files were deleted in project and were checked in to repository.
Could you please describe easy steps how to restore project state for specific date ?

The only way you could do that was if you used Time Machine on the computer to make backups. You could simply store the mobile backups folder on the day you wanted and then restore the iPhone.
I've done this successfully in the past.

How to fix no of question for specific test

Similar Messages

Maybe you are looking for