How to fix no volume on headset???

how to fix no volume on headset??

Have you tried a hard reset? Hold the home and top buttons down at the same time until the Apple logo shows.

Similar Messages

How to fix my volume (-) bottom what isn't responding or how much cost they gonna charge to repair it ??

How to fix my volume bottom ??

Hello Shiningboy,
Thanks for using Apple Support Communities.
Please take a look at the website linked to below that explains the service options for your iPhone.
Repair & Service
http://www.apple.com/support/iphone/repair/
Take care,
Alex H.

How to fix failed volume structure

I ran tech tool deluxe and got the diagnostic that the volume structure failed the test. Tech Tool Deluxe doesn't offer an option to "fix" this problem.

Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Just recently I ran into a problem when I tried to Verify my hard disk and when it tried to verify the catalog, it responded "Invalid sibling link." Repair Disk didn't work. I searched the web and Apple's site, and couldn't find anything useful except to buy DiskWarrior or reformat the drive. Knowing that OS X is built on Unix gave me a few clues on how to proceed. The solution is pretty simple:
Boot off the OS X CD (reboot, hold C while booting).
The installer will load up, go to Utilities in the menu and run Terminal.
Type df and look for the drive that has your Mac system mounted---you'll have to unmount this. On my MacBook Pro, it was /dev/disk0s2.
Type umount /dev/disk0s2, replacing disk0s2 with whatever disk your OS lives on.
Type fsck_hfs -r /dev/disk0s2. If you umounted the wrong thing, it will complain that you can't repair a mounted drive. Go back and umount the right thing and repeat this step.
Just for fun, you might want to run another fsck_hfs on your disk (use the -f option because your drive is probably journaled). Hope this helps someone so they don't buy a program that's going to do pretty much what we did with fsck_hfs, and so they don't waste time searching for an answer to no avail. By the way, TechTool Deluxe (3.1.1) didn't find the Catalog problem for some reason (you'll have this on a CD if you have AppleCare), which is why I resorted to fsck.
http://hints.macworld.com/article.php?story=20070204093925888
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83

How to fix the volume on a Macbook Pro

Hello, Apple afficionados.
I've been having an issue with my laptop recently and am wondering if any of you would be kind enough to help me (yes, I acknowledge that I may end up having to bring my laptop in for a technical repair.)
I have, I believe, the latest MacBook Pro, the 2011 version. 15'
This August will make two years since I had it
Last December or early January, I removed the headphones from the audio jack and noticed that the speak icon in the upper right-hand corner has greyed out. Whenever I press F10, F11, or F12, a circle-with-a-line-through-it appears. Whenever I place headphones in, the volume returns.
I had one friend tell me to look into the audio jack and see if there is a red or green light. I see no light at all; it is just pitch black in there.
A while ago, when I would remove the audio jack, the volume would be gone for a few minutes, but then it would return, to where I had normal volume and did not need something plugged into the audio jack to have audio.
Another friend suggested that I access the Activity Monitor and Force-Quit the core audio. That has not worked either.
I'm not sure what to do, and any help would be greatly appreciated!
Oh, and as of 3/12/13, my operating system is Mac OS X Version 10.7.5. I have a 2.3 GHz (GigaHertz ?) Intel Core i5. Also, I have a $ GB 1333 MHZ (MegaHertz?) memory. All software is up to date.

It didn't help
I found something, however. If I click "System Preferences", then "Sound", and then "Output", when my headphones aren't in the audio jack, under "Name" it reads "Digital out" and under "Type", it reads "Headphone port". There's no sound. However, when I plug in my headphones and select "Use audio port for: Sound Input", the volume comes out normally, as if there are no headphones, even though my headphones are plugged in. The sound comes out normally. Hopefully, that doesn't sound confusing lol.
If i can't truly get my Mac's sound back to normal, then I'll just plug in my headphones and select to use them for sound input. If I select "Use audio port for: Sound Input", the music transmits through my headphones.
Oh well.
Thanks for your help, though, sanjampet

How to fix my volume slider so i can see it on the screen

I have a dv6-1355dx and i had to restore it to the factory settings and ever since then when i try my volume slider it works still i just dont see it on the screen anymore any one that knows what this could be would help me out alot

Welcome to the HP Forum!
bpc4587 wrote:
I have a dv6-1355dx and i had to restore it to the factory settings and ever since then when i try my volume slider it works still i just dont see it on the screen anymore any one that knows what this could be would help me out alot
What is the installed operating system and version (32-bit or 64-bit)?
Do you mean the volume slider from the taskbar or the one from the audio software/
The audio driver can be found on the driver and software download section of the web support portal for your notebook. This is the page you seek. Use the dropdown to select the correct version of the installed operating system for your notebook. Right-click Computer and select properties to see which version is installed in your notebook.
Kind regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Lost my volume on my ipad ,how to fix it .

HOw to fix my volume on my ipad 2 ,no volune anywhere.

Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset please help thanks!!!!

Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset please help thanks!!!!

Post this in the iPod Touch forum.
https://discussions.apple.com/community/ipod/ipod_touch
B-rock

How to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).

how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).

The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them.

0x8056530b error enabling disk deduplication on Windows Server 2012 R2 Volume - any ideas why or how to fix?

I'm getting the following error when trying to enable disk de-duplication on a volume on my Windows 2012 R2 file server. The error is:
"There was an error updating Data Deduplication on volume: MSFT_DedupVolume.Volume='\\?\Volume{8dfc4322-9997-11e3-93f5-005056a84b9b}\' - HRESULT 0x8056530b, The specified volume type is not supported. Deduplication is supported on fixed, write-enabled
NTFS data volumes and CSV backed by NTFS data volumes."
The volume in question is a 1TB VMFS volume mounted to the virtual machine that is the Windows file server. I could find no info anywhere that references this error as it relates to a standard mounted volume or VMware or VMFS.
Any ideas on what could be the problem or how to fix it? I could find nothing in the log files other than an entry which is basically a repeat of the error above.
Any help would be greatly appreciated.
- ADEHART
P.S. This is a volume that was previously mounted on an older Windows 2003 server. Not sure if that may make a difference.

have you compared this issue to the ones that are successful and compared what is different?
Have you made sure of the following:
Servers
See the following list for server requirements for deduplication:
• Server hardware should meet the minimum requirements for running Windows Server 2012. The deduplication feature was designed to support minimal configurations such as a single processor system with 4 GB of RAM and one SATA hard disk drive.
• If you plan to support deduplication on multiple volumes on the same server, you need to plan an appropriately size for the system to ensure that it can process the data. The general rule is that the server needs 1 CPU-core and 350 MB of free memory to run a deduplication job on a single volume, and that job can process about 100 GB per hour or around 2 TB per day. Deduplication scales with additional CPU core processors and available memory to enable parallel processing of multiple volumes.
For example: If you have a server with 16 CPU core processors and 16 GB of memory, deduplication uses 25% of the system memory in the default Background Processing mode, and in this case, that would be 4 GB. If you divide by 350 MB, you can calculate that the server could process about 11 volumes at a time. If you add 8 GB of memory, the system could process 17 volumes at a time. If you set an optimization job to run in Throughput mode, the system will use up to 50% of the system’s memory for the optimization job.
• Data Deduplication supports up to 90 volumes at a time; however, deduplication can simultaneously process one volume per physical CPU core processor plus one. Hyper-threading does not impact this because only physical core processors can be used to process a volume. A system with 16 CPU core processors and 90 volumes will process 17 volumes at a time until all 90 volumes are done, if there is sufficient memory.
• Virtual server instances should follow the same guidance as physical hardware regarding server resources.
Volumes
Volumes that are candidates for deduplication must conform to the following requirements:
• Must not be a system or boot volume. Deduplication is not supported on operating system volumes.
• Can be partitioned as a master boot record (MBR) or a GUID Partition Table (GPT), and must be formatted using the NTFS file system.
• Can reside on shared storage, such as storage that uses a Fibre Channel or an SAS array, or when an iSCSI SAN and Windows Failover Clustering is fully supported.
• Do not rely on Cluster Shared Volumes (CSVs). You can access data if a deduplication-enabled volume is converted to a CSV, but you cannot continue to process files for deduplication.
• Do not rely on the Microsoft Resilient File System (ReFS).
• Can’t be larger than 64 TB in size.
• Must be exposed to the operating system as non-removable drives. Remotely-mapped drives are not supported.
Note
Files with extended attributes, encrypted files, files smaller than 32 KB, and reparse point files are not processed by deduplication.

I get this error message when I try to back up my laptop: Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle is already in use. Anyone know how to fix it?

I get this error message when I try to back up my laptop:
' Time machine could not complete the backup. The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. "
Anyone know how to fix it?

Reboot the TC.. Sometimes you need to reboot the whole network.
This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
Read C12 in pondini.
http://pondini.org/TM/Troubleshooting.html
C17 can be related I think.

Just purchased the iphone6 and can hardly hear when I get a call, despite volume up, bluetooth off and nothing obstructing device. This issue is all over the Web, come to find out. How to fix?

Just purchased the iphone6 and can hardly hear when I get a call, despite volume up, bluetooth off and nothing obstructing device. This issue is all over the Web, come to find out. How to fix?

Turns out there was a film on the glass side of the phone that I didn't even know was there! All is well now! Yay, cause I'm really liking this phone. Had a blackberry for ever. Thank you for your prompt response. Ann
Sent from AOL Mobile Mail
Get the new AOL app: mail.mobile.aol.com

I keep getting the message "no volume available" when I hook my iPad up to my TV to watch netflix, does anyone know how to fix this?

I am trying to hook my iPad up to my TV so I can watch netflix on it, however, when i hook the AV cable up i get a message that says "no volume available." my iPad is not muted, does anyone know how to fix this problem?

Read this link and it may provide some help: https://discussions.apple.com/message/15460209#15460209

Tech Tool Deluxe DVD won't boot with 10.5.6. How to fix volume structure?

Is it just my newbieness, or is the Tech Tool Deluxe 3.1.2 DVD image not bootable with late 2008 MBP with OS X 10.5.6?
I installed Tech Tool Deluxe 3.1.2 to Leopard 10.5.6. - ran it and it said I have problems with my volume structures. I followed the download button, gave my serial and downloaded the TTD.dmg image, burned it to DVD with Disk Utility (seems OK, as I can read the disk in OS).
When I try to boot from the DVD, it just reboots in a while to my OS X (tried with c and opt buttons during start-up. I can choose to boot from DVD with opt, but again it just reboots in a while).
Apple mentions that this version of TTD is not compatible with Late 2008 models - is booting one of the incompatibilities? If so, fine, but how can I fix my volume structure problems now, that tend to hang my Mac every once in while with big disk operations?
Thanks for any possible help.

I had the same problem myself. The TechTool bootable products on DVD won't startup an October 2008 release MacBook or MacBook Pro.
From the Micromat website:
Our current bootable products support all PowerPC and Intel Macintosh computers capable
of running Mac OS X 10.5 or greater, except for:
• MacBook (October 2008 Release)
• MacBook Pro (October 2008 Release)
http://www.micromat.com/index.php?option=content&task=view&id=168

HT3275 I have a red "i" message - The backup disk image "/Volumes/_________'s Time Cap/Macintosh.sparsebundle" is already in use. Any idea how to fix this?

I have a red "i" message - The backup disk image “/Volumes/_________’s Time Cap/Macintosh.sparsebundle” is already in use.
Any idea how to fix this?

Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back into the back of the Time Capsule
This simple reset will fix this issue 98% of the time. If you are in the unlucky 2% category, more help is here:
The Backup disk image ... sparsebundle ... is already in use.

My ringer volume keeps turning itself up to max and then the volume icon stays on the screen, anyone know how to fix this?

My ringer volume keeps turning itself up to max and then the volume icon stays on the screen, anyone know how to fix this?

I Have the exact same issue why is there still no fix?!?

How to fix no volume on headset???

Similar Messages

Maybe you are looking for