How to fix pam config with solaris-backup-1

Hi,
I do an error on pam.d and i don't connect to my solaris.
I succeed in solaris-backup-1 but it's an archive.
So how to fix my pam.d config with solaris-backup-1
Thanks for your help

I do "beadm activate solaris-backup-1"
and i obtain with "beadm list" :
solaris-backup-1 NR / 5.43G static 2014-09-22 11:21
solaris-backup-1 is a back-up of the installation
I didn't find my files in /opt
So i activated/mounted solaris
beadm activate solaris
beadm mount solaris /mnt/solaris
I succeed in modify pam.d
Thanks

Similar Messages

HT1366 How to fix Flashing Folder with Question Mark on Mac

How to fix Flashing Folder with Question Mark on Mac

RichardEL is probably correct. I’ll go through your questions.
> there is no Mac OS partition, I assume it would be directly underneath the HD on the left?
I have not seen this particular condition where the hardware disk icon appears but the system volume that is supposed to be below it does not. The System Disk partition would be below the HD icon indented to the right. It is usually called “Macintosh HD” unless you renamed it.
> when I go into disk utility my HD appears on the left, but I can repair or verify it
Odd. It appears but you cannot manipulate it with Disk Utility.
> The S.M.A.R.T status reads verified
If it did not say Verified then it would indicate a problem. Saying Verified does not rule out problems but I think it indicates it is still breathing.
> Is the HD deceased?
If you booted the Recovery Partition (Boot, Command-R), which it sounds like you did, then at least part of the disk is still breathing. If it took a long time to boot then that may have been a Network Recovery boot which would indicate the disk is very sick or dead.
> [If I] restore from time machine [will] everything will be back as it was before?
Yes. That is the beauty of Time Machine. All your data, applications, and system preferences will be as they were as of the last backup.
> I was thinking of erasing the HD, would this be of any help or do I just need a new one?
Given what you reported from the Disk Utility steps you took it is unclear to me if there will be a way to repair the current volume, if you can erase and install from scratch or if you need a new disk. Before proceeding it may be useful to have an expert at an Apple store look at it for you. They may be able to revive it without a clean install or new disk.
As was the case above, it could be a good disk with a bad cable in which case a new disk is not going to help. To test this you can purchase an inexpensive external enclosure, remove the internal disk, place it in the enclosure, plug it in and then use Boot-Option to attempt to boot from the now external disk. Here are links to the screwdrivers and enclosure you would need.
$5 Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
$22 USB 3.0 enclosure: http://eshop.macsales.com/item/OWC/ES2.5BU3W/
If you attempt a clean install, use the Partition tab to repartition the disk, selecting one partition and with “Options…” electing a GUID partition. Then use the Erase tab, select “Security Options…” and set it to write a single pass of zeros. This will write to every sector to map out bad blocks. (If you have an SSD do not write a pass of zeros.)
If you do need to replace it I recommend an new inexpensive (~$100) and super-fast hybrid SSHD drive that has an 8 GB SSD cache that makes the data fly. Google “Seagate 1 TB hybrid SSHD”.

How to fix a problem with my book pro that has a gray screen with a folder with a question mark on it

does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?

Hello Mokhtary123 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
A flashing question mark or globe appears when you start your Mac - Apple Support
OS X Recovery
http://support.apple.com/en-us/HT4718

How to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).

how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).

The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them.

I updated my ipod and it deleted my entire library how do I restore it with the backup I have saved?

I updated my ipod and it deleted my entire library. How do I restore it with the backup I have so all songs will be available in the cloud; which I paid extra Money to increase memory for?

The backup that iTunes makes does not include apps, music, synced videos and photos. Se:
iTunes: About iOS backups
You will have to sync the items back form yur computer/iTunes library to the iPod via iTunes. If they are not on the computer you can redownloa d some iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

WHEN or HOW to fix the problem with Thunderbolt/Side screen problems

WHEN or HOW to fix the problem with Thunderbolt/Side screen problems (Cinema screen). Keeps blinking on & off then eventually completely off. Would have thought Apple would have fixed the problem by now as it is apparently to do with the Thunderbolt connector!.

Hello, might it be Video card related?
See if yours is on the recall list...
iMac (27in): AMD Radeon 6970M Video Card Replacement Program (del 'mid 2011')
http://xlr8yourmac.com/
http://support.apple.com/kb/TS5167?

How to fix a problem with the discharge rate of the battery in the iPhone

Hi I have a question namely how to fix the problem of discharging the battery in the iPhone 4 with ios7.1

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

How to fix ASA problem with Error message id 713231, 713232 ?

Dear all,
It's been two day with this problem and it's not possible to stablish vpn with peer yet. ASA is reporting error with messages id: 713231 & 713232. Before this the vpn was working perfectly. I did a reload of the ASA, but the problem continues:
713232 Group = x.x.158.254, IP = x.x.158.254, SA lock refCnt = 0, bitmask = 00000000, p1_decrypt_cb = 0, qm_decrypt_cb = 0, qm_hash_cb = 0, qm_spi_ok_cb = 0, qm_dh_cb = 1, qm_secret_key_cb = 0, qm_encrypt_cb = 0
713231 Group = x.x.158.254, IP = x.x.158.254, Internal Error, ike_lock trying to unlock bit that is not locked for type SA_LOCK_P1_SA_CREATE
ASA 5510 version 8.3 (1)
Is there anybody who knows how to fix this?
Thanks in advance.

Firstly ASA version 8.3 isn't that stable. I would advice you to upgrade to 8.4(5).
Did you do a search in google? This is wat I found:
http://www.cisco.com/en/US/docs/security/asa/asa80/system/message/logmsgs.html#wp4776301
Posted by WebUser Erik Boss from Cisco Support Community App

How to fix underscan problem with footage

I am trying to help a friend fix a problem with some footage he shot. A client was standing in front of a painted matte. The footage was shot,(and cannot be re-shot) and once back in the studio he found that a the edge of the matte that is not painted is showing up beyond the TV safe area. It can be seen on a computer screen and if shown thru a projector. The viewfinder of his camcorder did not show this problem.
So how can we fix it? It is a narrow band of white on the left side of the screen. The problem is that part of some leaves cross over it and out of frame. We have tried just simply scaling it up to get beyond the white edge but the picture quality begins to degrade. We have to fix this using FCP since that is all that is available to us. The clip is fairly long so we probably won't have the time to fix it in Photoshop.
Any help is greatly appreciated.
He is using FCP4.5 on a dual processor G5.
Thanks!
Ymir

The cropping would leave a black bar. Something I was thinking about doing has cropping involved. I thought about duplicating the clip and stacking it over the original clip. Then crop it as suggested and then scaling the clip underneath and apply a Gausian blur. This would eliminate the white edge. Problem is, I have a hard line where the cropping took place. If there was some way to just feather the left edge of the crop.
My friend thinks some type of masking needs to take place where we could just re-color the white bar but as of yet we haven't discovered how to go about it.
Thanks for the suggestion,
Ymir

How to fix computer freeze with external USB drive attached

Hi, My computer has frozen a few times lately when my external drive was hooked in, mostly to upload music to Itunes on my MacBook Air. Anyone know what's happening and how to fix it?
Thanks
Peggy ;~)

the image isnt just 1 big file
its got a bunch of files
som .ini configuration files here and there
the trick is to find which files controls the directory to start loading from
and change the waiting for f:
to waiting for anything else
external ODD, flash drive, or anything other than the internal ODD cuz its broken
the files on the disc are
recovery disc+
.....boot+
..............fonts
..............bcd
..............boot.sdi
...................eftsboot.exe
......efi+
.................microsoft+
...................................boot+
..............................................font s
.................................................. ......bcd
.....HDDPREP+
............................boot
............................sources
............................bootmgr
......HTMPREP+
...........................readme.html
...........................toshiba.jpg
......sources+
.......................boot.wmi
.......tools+
..................crtdll.dll
...................imagex.exe
...................version.txt
...................vRecoFastCRC.exe
...................XcludeCRC.ini
...................zlibwapi.dll
....06466XR1.CRC
....06466XSP.SWM
....06466XSP2.SWM
....06466XSP3.SWM
....06466XSP4.SWM
....06466XSP5.SWM
....06466XV1.CRC
....bootmgr
....Setenv.ini
im know im not super computer expert but as far as my knowledge goes its probably 1 of thos xxx.ini files cuz usually contain settings and stuff like that
they are easy to open with notepad and easy to just change one of them and burn a new disc with the corrected file
i just need someone to help me figure out which one to change and what to change it to the rest is easy

How to fix the signal with the microphone to the computer when recording through an interface? every time i record and play back i get poor signal and a lot of fuzz

How to fix the signal from the microphone to the computer when recording through an interface in logic pro? Every time i record and playback i get poor signal and a lot of fuzz.. how can i fix this problem?

Which model computer?
What operating system?

How to fix a issue with a corrupted LDAP?

Hi all.
I am new to this communty
ll appreciate if some of the knowledgeable members can help me on few weblogic scenario based querries.
so here's it:
If your weblogic server fails to start after you enter your credentials; and you know it’s an issue with a corrupted ldap; how would you fix it?

firstly, check if you are entering the correct data..
1) If you are entering right and getting rejected, rename the LDAP directory and restart the servers.
(It will create a new LDAP directory with encrpted values in their files)
2) If you forgot your password, rename LDAP directory and replace the encripted password with the new password in boot.properties and restart the server(s)
Please let me know if that does not work.
PS.. DONOT delete the LDAP directory, rename it(just in case)...

How to create new database with rman backup

hi,
i took a rman backup with nocatelog. can i make a new database with that rman backup.
if yes then how ? i m using oracle 9i.
thxs

'NEW' doesn't seem to be the right word here, but you can DUPLICATE (clone) an existing database or restore it to a new host:
http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/toc.htm
Werner

How to create new Database With existing Backup

hi all
my Scenario is
i have full backup of my database(11g r2 64)
i formatted my system and reinstall
h3. Windows 7 ultimate 64
how to create the same Database as it was earliar?
i have
h3. Oracle 11g r2 same as backedUp 64
h3. Full Backup Through eterprise manager
Thanks to all
Edited by: Rajneesh on Sep 27, 2011 10:53 PM

You can create a clone database using DUPLICATE DATABASE command as it's shown in the following video tutorial:
http://kamranagayev.com/2010/06/25/rman-video-tutorial-series-creating-duplicate-and-standby-database-using-rman/
Or perform disaster recovery using backup files using the following video tutorial:
http://kamranagayev.com/2010/03/29/rman-video-tutorial-series-performing-disaster-recovery-with-rman/

How to fix Home Sharing with new iOS 7 upgrade

My Home Sharing wont work now I have updated my iPhone and iPad to the latest iOS. How do you fix this?

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
The following article(s) may help you.
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Sources of Interference
Wifi Diagnostic Software (for Mac users)

How to fix pam config with solaris-backup-1

Similar Messages

Maybe you are looking for