How to fix parts in a track

So I'm recording guitar in garageband. Is there a way to fix certain sections within the track? I have an otherwise good track but I noticed a few hiccups here and there. Thanks!

Hello,
Look at Punch In/Punch Out techniques.
Alastair.

Similar Messages

How to 'Fix or Freeze' Flexed Tracks?

I am looking for the best way to fix flexed audio tracks in their new state once I am satisfied with the editing etc.
What is the best way to save them? By freezing the track, or bouncing it to make a separate audio file? Or any other way?
And then can I delete the old regions, as they may be referenced by other arrangements? Would that save some processing power as well?
I presume I should re-beat map the track/s (i'm editing drums), to make sure my quantising represents 'on the beat'?
The problem I've having is that, for whatever reason, sometimes I find that when I re-open a file with previously flexed tracks, one or two of the tracks have 'forgotten' their flexed state and have flexed themselves according to their own transients rather than to the transients on the Q marked tracks I have chosen in the phase locked group.
I'm editing drums and I set and adjust the transients within the sampler editor of the bass & snare tracks and then choose these as the Q tracks for the drum group, which includes toms, hihat and overheads. Often, is the overheads that forget the Q transients and slip forward and out of phase with the rest of the drums, In flex view mode you can see the flex lines are not lined up within the grouped tracks.

I have ran ssocfg:
oracle@server:/oracle/mid/oracleosd/sso/bin> export ORACLE_HOME=/oracle/mid/oracleosd
oracle@server:/oracle/mid/oracleosd/sso/bin> export ORACLE_SID=ASDB
oracle@server:/oracle/mid/oracleosd/sso/bin> ./ssocfg.sh http server.domain 7777
running ssocfg.sh
finished running ssocfg.sh, exit status 0 I also have checked OperationURLs of oiddas in OID (using Directory Manager). It is correct: http//server.domain:7777/
After this I have restarted all the components of Fusion Middleware. But unfortunately, the problem still exists...
Does anyone else got some ideas?

How to fix part of a page in a tab canvas

How can we allow part of columns in a page in tab canvas to be scrolled ?
null

The columns that you wish to scroll through should be placed on a stacked canvas. A stacked canvas has properties that allow you to show horizontal and vertical scrollbars.
Stacked canvases have two sizes that you need to be aware of the "Physical" width and height. This is the available space that you can place your items.
Stacked views also have a viewport size which is the size it shows on the screen and you can "scroll" to see the rest the physical size.
Hope this helps,
Candace Stover
Forms Product Management
null

How to fix this live bass track?

Link to bass track: http://www28.zippyshare.com/v/81874411/file.html
What's the best way to "stabalize" this live bass track? It starts to peak too much when it hits low notes.

Pull your audio file into GB's timeline to create a real instrument track. Click cmd-i to bring up the info pane. The first thing you might want to do is try out the bass presets - select "Bass", and you'll get a selection of 20 or so presets that include combinations of EQ, compression etc. I bet you find some preset that will be close to what you want your bass to sound,
If you want to create your own sound, either starting from scratch or from one of the presets, go to the "Edit" tab and click into one of the empty slots. That will give you a list of effects to pick from - AUPeakLimiter is the Limiter, AUDynamicsProcessor ist the Compressor. They come with presets too that you can pick from, or (clicking the icon) you can manually set all their parameters. Also take a look at the Visual EQ - it has a preset called "Bass Strengthen" that might add the punch you are looking for.

My ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

my ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Simple, yet not so. How can I just edit out part of a track. Help says select the region in the timeline, but doesn't seem to be able to perform a most basic function of cut and paste

Hi folks, anyone out there know how to select a region in the timeline so I can delete just part of a track. I am making a soundtrack and want to fade in and out mp3's that I drag onto the track.
Thanks.
I feel dumb.

Hermsboy wrote:
how to select a region in the timeline so I can delete just part of a track [the region in the track]
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)

My iPod touch 4th generation's screen is part white but,my iPod still works but I can see only part of the screen.Does this mean part of my screen is broken? Or is there a way to easily fix this? If so please tell me how to fix it.

I need help on knowing how to fix my iPod touch's screen.

Apple will exchange your iPod for a refurbished one for &199 for 64 GB 4G and $99 for the other 4Gs.. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are not working I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Logic Pro X help: Track/File menu not showing up in audio editor. How to fix?

Hello,
I am a amature musician that has been using logic pro for a little while now. I recently tried to use the time and pitch machine to stretch a sample to my project length. I open up the audio editor and behold! No file menu. I have looked through all the mues and I cant seem to find it anywhere.
Has anyone experienced this problem and do they know how to fix it?
Thank you

You are in Track view, where you need to be in File view. Those tabs are just outside of your screenshot, it seems. You must have either an enormous screen or a big screen resolution.
As KC said, flex is a more versatile tool, but if you have a set workflow, then the T&P machine is still there.

How can I selectively amplify parts of a track?

My apologies if i'm not using the correct parlance, however I'd like to selectively amplify parts of my track that fall within a particular threshold without affecting anything else. For example, I have sections of my track that fall between -6dB and -9dB. I would like to amplify only sound within that range by +2dB. How can I do this? Or, if it'll just "sound better", how can I amplify everything lower than -6dB to be "a little louder" without affecting anything else?
Note that I have already applied compression to my track to bring the peaks down a bit (thresh = -6dB, ratio = 2:1); that was the first half of what I want to accomplish. The amplification question above is the other half. I'm not interested in having the compressor do all the work; the results have always been severly clipped audio.
Any assistance is much appreciated!

What you have already done to your track to reduce the peaks is "downward" compression. What you need now is a little "upward" compression to bring up the level of the -9 to -6 range. Audition's Dynamic Processing is quite good for this as you can either draw on the graph or enter values for various levels in the audio.
Alternatively "parallel" compression might be appropriate here. There is an excellent article on how to do it in the latest edition of Sound on Sound mag.

How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?

After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
What am I doing wrong?
How exactly are you doing this?
When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file. Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
You should see this prompt, when you are joining the regions:

How do I fix out of order tracks from imported CD's?

How do I fix out-of-order tracks from imported CD's?

If you don't have find my iPhone install it's not much you can do. You should change your passwords on those accounts and on your iTunes account as soon as possible.

I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fualt lies at my end or at the other end

I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fault lies at my end or at the other end

If only the language is Hebrew, you should correct it in the Paragraph and Character Styles.
But in such a case I would expect more problems.
If you are a creative cloud subscriber you should additionally install the InDesign version, English with Hebrew support:
Go to the preferences of you CC.app. It is found behind the Gear Symbols on the top right.
When the preferences open, go to the Apps section.
Change the App Language to English with Hebrew support.
Now you can install it. It will install on the very same place where your InDesign program is found some additional plugins, which will give you access to Hebrew functionality, like RTL text. Otherwise you will inherit in the document (and where you copy and paste it from such a document into another one). But now you can change or repair problems.
Now repeatstep 1 + 2, but you need not to install your own language again. InDesign will now, when started, run in the language of your OS (when you have it installed in that language) but with more functionality to handle problems with Hebrew documents.
The same steps you would have to do with Arabic or Asian documents. These languages will also add more plugins. But keep it limitted to those language you need. I have installed it that way, because I get sometime documen where the text flows the wrong direction or the numbers come up in Farsi digit, not in Arabic digits. For such purposes I need versions in languages I don’t understand myself.

HOw to Fix This 3D tracking problem Help me FAST!

how to fix that on adobe after effects cc help me fast cuz i want to make a video with this 3d tracking stuff but i cant help me fast!!

Nobody can tell you anything without proper system and version info. This error typically means that the link to the external process is being blocked, so check your security tools.
Mylenium

How to fix the decimal part(round) i.e. fix the size of float.

how to fix the decimal part(round) i.e. fix the size of float.

You can use BigDecimal to round of your number.
float f = 5.678f;
f = new BigDecimal(f).setScale(2, BigDecimal.ROUND_HALF_UP).floatValue();If you just want to display the float with a certain number of decimals, you can use java.text.DecimalFormat
DecimalFormat df = new DecumalFormat("0.00"); // two decimals
float f = 5.678f;
System.out.println(df.format(f)); // should show up as 5.68

How to fix parts in a track

Similar Messages

Maybe you are looking for