How to fix payment term in purchase order
Hi: Everybody
can you tell me how to fix value of payment term when creating or change purchase order? that means this field value just copy from vendor master data. and users can not change this value.
I try to research screen field control in SPRO. however, may standard sap not provide this function.
thank you
Henry
Hi
This can be acheived using the Field selction control.
Check the field selction key for the PO document type.
SPRO-> Materials Management-> Purchasing-> Purchase Order-> Define Document Types.
Now maintain the filed selction key in
SPRO-> Materials Management-> Purchasing-> Purchase Order-> Define Screen Layout at Document Level
In the filed selction group Terms of delivery and payment, maintain the field selection option as display for the fields
Terms of payment
Terms of payt. (days, percent)
For the field selection key ME21N & ME22 also maintain the same
Thanks & Regards
Kishore
Similar Messages
-
Rights to change Payment Terms on Purchase Order
Hi,
How can we assign rights to a user who is allowed to change the Payment terms for Purchase orders entered.
Currently , the moment a PO is entered and the payment terms is changed it prompts a message saying that you are not authorized to change the payment terms.
Where under Authorizations can i go and change this?
Can anybody suggest a solution?
Jyotijyoti,
Go to
Administration>System Intialization>Authorization-->
Genreral Authorization>Select user left side>
Select Drill Down Administration>Drill down Setup>
Drill Down Business partner>Drill Down Payment terms>
Give Full Authorisation
Jeyakanthan -
Payment terms of Purchase Order and F-47
Dear All,
How can we link Payment terms of Purchase Order and Advance Payment made thru F-47.
i.e if we have given payment terms in Purchase ORder as 50% advance then by advance payment (F-47) we shall allow to pay only 50% of Purchase Order value as advance.
How / where can we define this type of setup.
Regards
Swatihi,
There is no way in the system to restrict the payment amount to 50%once, it is mentioned in the payment terms as 50% advance. System does not have control tocheck and avoid the full payment
Rgards
Uma -
Bapi changing payment terms in purchase order
hi to all abap gurus
I want to change the Payment terms in Purchase order using bapi_po_change . can u pls give coding for this bapi with all required int tables declarations . points will berewarded for good ansersThere is a documentation available for this BAPI and there is an example (although it is a bit confusing). You need to send the folowing parameters:
Parameter: PURCHASEORDER = <PO number>
Parameter: POHEADER
PMNTTRMS = <payment term value>
Parameter: POHEADERX
PMNTTRMS = X
Declare your structures/tables using the same type as in BAPI - just copy/paste. -
How to change Payment Terms in multiple orders at same time?
How to change Payment Terms in multiple orders at same time?
I have got 10,000 Order, I need to change the payment terms for all these Orders.
Can I Know the way out for this.
Regards,
Dantham Conpolwedson
Edited by: Dantham Conpolwedson on Mar 25, 2009 11:18 AMHi
There are as many options for that
You can go for
1)MASS t code
2) LSMW (by recording)
3)BDC (by recording)
and the most easiest way is by doing the MASS tcode
goto MASS and enter the object type as BUS2032
execute now select the sales order haeader data and execute and now enter the sales doc from and to range and execute now all the sales dox will be displayed
and from the menu click on select fields and select the terms of payment
now select the terms of payment row and enter the new values and click on carry out new changes
regards -
Payment Term in purchase order
Hello,
How to configure payment term as 15%(variable) advance , balance against proforma invoice.and where this advance % I will have to put in purchase order?
Regards
KedarHi,
Payment terms are maintained in SPRO>Financial Accounting>accounts recvable and payable>incoming invoices>maintain payment terms
check for yourself you will come to know how those are maintained
Best Regards
Diwakar
reward if useful -
FI Validation for Payment term in Purchase Order
Hi All,
Please help me with this if we could have some validation
Client want to restrict the payment term to (2-3 options) selection at the time of PO and invoice entry
Example:if we set up a merch vendor with 75 day terms the buyer can't choose anything but 75 day terms, but if we added 30 day terms they could choose either 75 or 30 days.
I understand that we cannot maintain 2 payment term in purchasing data of vendor master without sub ranges( which client doesnt want)
but was wondering if there any solution to it (no enhancement)Hi,
Payment terms are maintained in SPRO>Financial Accounting>accounts recvable and payable>incoming invoices>maintain payment terms
check for yourself you will come to know how those are maintained
Best Regards
Diwakar
reward if useful -
Credit card charges according to payment terms and purchase order types
Hi All,
Can anyone please tell me how can we charge credit card fee for customer (the customers who are using credit card), according purchase order type and payment terms ( like for purchase order B2B &B2Z and if customers have payment terms other than NT00)
CONDITIONS
Customer must use credit cards
Purchase order type of the order is B2B &B2Z only
For these purchase orders ( B2B &B2Z ) payment terms must be other than NT00.
Charge must be 2.5%.
Edited by: suresh saketh on Aug 24, 2010 3:10 AMHello Suresh,
CONDITIONS
Customer must use credit cards
Purchase order type of the order is B2B &B2Z only
For these purchase orders ( B2B &B2Z ) payment terms must be other than NT00.
Charge must be 2.5%.
The best approach would be to define a Custom Condition type for charging processing fee in V/06. After defining this new condition type assign it to the Pricing procedure which you are currently dealing with. In the Column AltCty - Condition formula for alternative calculation type, you can create a New routine involving the following logic.
Purchase Order type should be B2B and B2Z.
Payment Terms other than NT00.
Charge should be 2.5 %.
Kindly update your post after trying out the above suggestion
Regards,
Sarthak -
Item wise payment terms in Purchase order
hi
Is it possible to have item wise different payment terms in Single Purchase Order?
Thanks in Advance
RajendraHi Prasad,,
It is not possible to maintain different payment terms item wise <b>in single PO</b>
Thanks
suresh
Message was edited by:
suresh kallur -
Payment terms in purchase Order
Hi,
When I have created purchase order manually, payment terms has been picked up from vendor master. Then i changed the payment terms in Vendor Master.
After that the Purchase Order has been created automatically from KANBAN, but that purchase order picked up the old payments which was there in vendor master.
Any reason why the old payment term is picking?There was no purchase requisition created for that. It could be picking up from some where else, but not sure from where this payment term is picking up
-
Payment Terms in Purchase Orders
Hi Gurus,
I want payment terms assigned in PO's.
Is there any standard report from where i can get the payment terms assigned in different POs? I dont have access of SE16 so please tell me an alternative way to find it out.
Please revert asap.
Thank YouHello,
Payment Terms are defined in Vendor - Purchasing Organisation Level. While creating PO for that vendor the Payment Terms are automatically picked up from Vendor Master data. Now in SE 16 from table EKKO you will find the Terms of Payment easily. As you do not have authorization for SE16 , please try the report MKVZ- Purchasing list. In selection criteria provide Vendor & Purchasing Org., you will get the Payment Terms in the Output. Else you can get the same individually in MK03 also.
Regards,
Victor -
Down payment Request from purchase order (me21n)
We need Down payment Request automatically created as per payment terms from purchase order screen.(ME21N)
no answer
-
Fix payment term as auto default in Sales Order
Dear Guru,
How we may fix payment term as default value in Sales Order. We identified that payment terms as Z002 - within 30 days Due net. So we would like to set this payment terms as auto default the momemnt we open the sales order screen. Appreciate if you could advice me the settings or configuration in SAP.
Thank you.
rgds,
nanthaHi
Goto VD02 and open the customer master record. In the Billing tab - payment terms field, give the payment terms value and save the changes. Now if you create a sales order for this customer, the payment terms will be defaulted automatically.
Thanks,
Ravi -
How to prevent change payment term in sales order?
Hi,
My client not allow sales admin. to change payment term in sales order. How to do this? (by standard SAP functions or authorization)
Thanks & Regards,
Jr.SDEither you can run T.Code shd0 or apply User exits in the program MV45AFZZ - USEREXIT_MOVE_FIELD_TO_VBAP to achieve this.
thanks
G. Lakshmipathi -
How to make "payment terms" not modifiable in sales order
Hello every 1,
please help, i want to know:
how to make "payment terms" not modifiable in a sales order , as we know it comes directly from CMR and client wants "PAYMENT TERMS" to be not modifiable.
Look forward for your response.
Thanks in Advance,
DeepakYou need to use SHD0 or userexit chnages, like always determine from customer master, if user changes, give message like not modifiable or ask abaper to make non modifable field
Maybe you are looking for
-
Hi, in our Enterprise environment, we have a single mac with Mavericks version 10.9.2 and Office for Mac 14.4.1. When setting up outlook, we are trying to connect to a mailbox on exchange server 2007. We put in the EWS details in the server field sin
-
HOW TO READ A TABLE CONTROL IN BDC
hi how to know the field position..which row in table control before edit it... for exaample: position of table control: mm02>enter matnr>basic view1-->click additional data.. depending on the sy-langu required language position changes. if sy-langu
-
Waves Tune plugin and os 10.4.6
I have a problem with Waves Tune. I installed 10.4.6, and now I always get the message "Error code -1 was returned by the direct TDM driver." Now I can not use my Waves Tune plugin anymore. It all worked fine in 10.4.5. Any suggestions? G5 dual 2,7
-
Bad local cache - how to update
Password sync just stopped working. Another working on that problem forgot that DSRepair isn't compatible with Zenworks 6.5 and ran DSRepair. As normal, it destroyed the ZenApps. We restored the eDirectory from a backup tape to get the ZenApps back.
-
Ipod classic freezes when trying to sync photos
Hi My Ipod classic has started to freeze every time I try to sync with my PC when adding new photos. This is something I have done many times before without any problems but as of yesterday, every time I try it just stops dead. As I type this message