How to fix poor wireless range using Airport Extreme?

I've just bought and setup an Airport Extreme router and have connected this using a DSL modem.
Everything works great from the room that I have set this up from, connection is good and wireless speed is fast. However, as soon as I leave the room - even if just outside of this - the internet speed either slows right down (to a very slow, unusable speed) or the connection to the network is lost completely.
Are there any settings that I may have got wrong? As I would expect the connectivity to be much better for this.
Thanks in advance,
Kevin

Do you have a Mac or Windows computer? If so, there are ways to get them to show you information about the strength of the WiFi signal as the computer moves around. If you don't, there may be a utility you can run on your iOS device that can show you that information.
Other than "iOS 5.0.1", you don't seem to have declared any of your system details in your profile or didn't select your details to be included in your post. Those can help people give you correct advice. To update that, click on "Your Stuff" near the top of a window on these discussion groups, then on "Profile". Scroll down to "My Products" and either edit an existing one or add a new one.

Similar Messages

How can I rename an established wireless network using airport extreme?

How can I rename an established wireless network using airport extreme?

Thanks for the info. On your Mac......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the picture of the AirPort Extreme
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window that appears
Edit/backspace out the Wireless Network Name and type in a new name that you want to use
Click Update at the lower right of the window
Wait a full minute for the AirPort Extreme to restart
Close AirPort Utility
The new network that you named will use the same network password that you set up originally.

How to disable the wireless section of Airport Extreme Base Station?

Is it possible to disable the wireless section of Airport Extreme Base Station?
It is because I do not want to have any high frequency radio signal which may be dangerous for small baby (no such proof for the moment, however).
Anyone using the new Airport Extreme Base Station please check and help.
Thanks!!

I think you are a little too concerned. Just for the sake of how to, here it is.
go to manual set up, airport, wireless, wireless mode, and then choose off.
good luck.

How to repeat wireless signal using Airport Extreme as base, Netgear as repeater

Some input and/or assistance is appreciated. I purchased a new 802.11ac Airport Extreme. I have an old Netgear wndr3300 (802.11n, 2.4 or 5GHz). I'm trying to repeat the 2.4GHz using the Airport Extreme as the master router and the Netgear as the repeater. The Netgear DOES have an option for repeating in the admin menu. I've followed what instructions I was given on the admin menu regarding providing the MAC address of the Airport to the Netgear router. I have had no success finding a place to enter the MAC address of the Netgear router on the Apple router if that is necessary. Can anyone assist?

While in close proximity to the TC, I can successfully browse the web and can log into the NG routers admin panel and view its settings. However, when I go out into the garage, the signal stays very strong, but I lose connectivity to the Internet.
When in close proximity to the TC, the Netgear is picking up a strong signal.
Move the Netgear device out to the garage....but do not power it up.
Log on to the TC wireless, if you can. That very weak and slow signal.....if you can log onto the Internet at all....is the same signal that the Netgear will be receiving.
A repeater or extender or whatever you want to call it can only repeat or extend the quality of signal that it receives. It won't make a slow signal faster or a poor quality signal better.
Therefore, the normal location for an repeater or extender would be a point that is about half way between the TC and and the garage.
Extending this way always results in significant compromises in performance. The extender needs to be close to the TC to get a good signal to extend. At the same time, you want a strong signal from the repeater for devices in the garage, so the extender needs to be close to the garage.
It cannot be close to the TC and be close to the garage at the same time with any method that I know of.
You may need to look at running an Ethernet cable out to the garage if you want good performance out there. Since there is no signal loss in a wire, the device in the garage gets a top quality signal to work with.

How to extend wifi range using Airport Extreme and Airport Express connected via ethernet cable

Hello,
I'm having an Airport Extreme fifth generation in my living room. I bought yesterday an Airport Express to extend the range of my WIFI in the house and I put in in my bed room. The two devices are connected together via an ethernet cable, from airport extreme (lan 1 port) to airport express to (wan port). Now from the airport utility what configuration I have to set to the airport express in order to extend my wifi range? Inside the wireless tab what i have to select in the network mode?
1. Create a wireless network (use same same wireless network name and pass work as the airport extreme)
2. Join a wireless network
3 Extend a wireless network ?
Thank you

You are way overthinking this. The utility will literally configure everything for you automatically. All that you need to do is name the device and click Next during the setup.
You can use your Mac using Mountain Lion or an iPhone or iPad.
Post back if you need the steps.

Toshiba A665 wireless slow using airport extreme

Slow even with no encryption. Works well with other routers I have tried. The wireless driver is current. Toshiba support has no idea.

I know this is an old thread, and I hope the OP solved his problem. If not, or if there are other people having this issue, I wanted to share my situation and what worked for me to solve it.
Bottom line: Try switching your encryption type from AES to TKIP and see if that helps.
Full Story:
I too have a Toshiba A665 laptop that works perfectly on every wireless network I've ever connected to with the sole exception being the network at my parent's house, where they have an Airport Extreme router.
I knew my laptop wireless was fine due to the fact it worked everywhere else. But I also knew that my parent's network was fine because everyone else's wireless connection was working as it should.
My computer would connect, but it was *painfully* slow. It was worse than dial-up (if you can remember those days). Pages would time out, email took forever to load, etc.
The connection strength was excellent, ping times to the router were perfect (3 ms or less), the connection speed was at least 65 Mbps, and it was connecting via 802.11n, which was great. Basically, I couldn't find any obvious reason why there was a slowdown.
After pulling my hair out trying multiple "solutions" and not finding any help online, I FINALLY stumbled on the answer (at least for me).
I am connected to the Airport using WPA2-Personal security. Intially, I was using AES encryption. On a whim, I changed that to TKIP instead and voilà! It works perfectly now.
It's hard to describe how frustrating this was to deal with and track down a solution for, but I'm hopeful that someone else can benefit from this fix as well.

Can I create a unique subnetwork when extending a wireless network using Airport Extreme?

My office building has an Airport Extreme to provide wifi to our individual suites. I would like to create a sub-network using my Airport Extreme for my suite only that uses the wifi signal from our office building and provides internet to the computers (both wired and wireless) in my suite but have it protected so that other suites in my building can't see my computers. Is this possible and how do I do it? I have currently set up my Airport Extreme in wifi-mode "extending a previous wireless network" and have the router with its unique router name. But once I extended the wireless network, I could not find the network name of my router, only the office name (the one I was extending). The computers connected via ethernet to my Airport have internet access but none of my wireless computers see my airport name, it sees the office building network name. I'm assuming they are connecting to my Airport since the signal level is much higher than before and it appears that my Airport is rebroadcasting the network name of my office building. Is there a way to have my Airport broadcast its unique identifier for wifi, still connect to the internet via wifi signal to the Office building airport and maintain segregation between my computers and the rest of my office building?
Also, when I use the Airport Utility on my Iphone, I see the internet -> the office airport extreme -> and then 2 different base stations connected in a Y. Mine and my neighbors (who is probably doing the same thing as I am). But there is a dotted line to my base station, does that mean I'm connected to the internet via my neighbor's airport?
Any thoughts?

I would like to create a sub-network using my Airport Extreme for my suite only that uses the wifi signal from our office building and provides internet to the computers (both wired and wireless) in my suite but have it protected so that other suites in my building can't see my computers.
It is not possible to configure a single Apple AirPort router in this manner using wireless only, but it would be possible to do this with a single AirPort if you connect your AirPort Extreme to the "main" router using a wired Ethernet connection.
As for wireless only....you could probably do what you want by using two Apple routers....an AirPort Express to join the wireless network and provide an Ethernet signal to the AirPort Extreme's WAN port. Then the AirPort Extreme could then be configured to provide a separate network using a different subnet.
Users on the "main" network would not be able to "see" any devices on your "private" network and vice versa.
I use the two router set up all the time at hotels that only provide a wireless signal. The first Express "joins" the wireless network and feeds an Ethernet signal to the second AirPort which is configured to "create a wireless network" in router mode.
This way, I can connect multiple devices to my "private" network, but only pay the hotel for one connection since the hotel router only "sees" the AirPort Express that joins the network.

Connect a PC to My existing Wireless Network Using Airport Extreme

this is my issue i bought a Airport Express to connect a PC via ethernet to my wireless network already working at home. Cant figure out the settings???? need help. My home network is using a airport extreme base station. the problem is the PC doesn't have wireless capability so i connected the PC to the airport extreme in order to connect to the network, but no luck so far.

Hello Sailor25. Welcome to the Apple Discussions!
What you need to do is configure the AirPort Express Base Station (AX) as a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)

Extending wireless network using Airport Extreme

I am thinking about using another Airport Extreme to extend my wireless signal.
I am curious if the ethernet ports will be rendered dead in the Airport Extreme like they are in the Airport Express untis when you choose extend.
I know I could go to a Roaming network but that is not the question for this setup.
I am hoping that I can use the ethernet ports for other things where the Extending Airport Extreme is as I have some devices I also want to hook up.
I have read something about this in the past but can't seem to find the answer now.
I already have one fairly new Extreme (square style) and am thinking about getting the newest version with the different and taller case.
Again, I would rather use the Extend feature rather then a Roaming because it would be difficult to run wires.
Also note: no electrical ethernet adapters either using the wall plugs. Not interested in that setup.
Thanks

Thanks Bob.
I have 3 Airport Express units that when in "Join a wireless network" the ethernet port can be enabled.
However, when I choose "Extend a wireless network" I no longer have that choice of allowing ethernet clients, it changes to only "Allow wireless clients". That's what has me curious and confused.
I haven't tried plugging anything into the units that are extended so I can't verify the ethernet ports work or not.
They are the b/g/n units but not the newest models. The models before that.
The window says it is an Airport Express 802.11n model.
The Airport Extreme is also 802.11n (4th generation)
All my base stations are running 7.6.4

Poor connectivi range with airport extreme card and wireless netgear router

Hi,
Just got all this lot up and running and in order to get any wireless connectivity att all the router must be sat next to the mac?
Any ideas on where to start?
Thanks
sarah

worked out it was due to airport card not properly seated and had to reconfig router a few times

Can't create a working Wireless Network using Airport Extreme Base Station

I don't know what I'm doing wrong...
I've got the cable from the modem going to the base station. I follow ALL on screen instructions. I select "Using DHCP" because when I plug the ethernet cable into my MBP it automatically does everything for me, and has that as its setting as well.
I get to the stage where it asks whether or not I'd like it to share an IP or go into bridge mode, I'm not sure what either of these two mean...I've tried both and both result in no wireless internet.
On several occasions I get to the end, and after I do the "final" update is comes back with one problem - internet connection, saying the router doesn't have a valid IP.
I'm totally lost on what to do here...
If you need more information just ask...please...

The below procedure is described in your AirPort setup manual, but it can be a little confusing. Here is my step-by-step procedure for an AEB setup for the system you describe:
A. Setup the 'Main' Base Station:
1. Do a factory reset of your AEB (main), then turnoff the DSL Modem and the AEB (main).
2. Check ethernet cable connections:
- DSL Modem > AEB (main) WAN port;
- AEB (main) > Mac computer running OS X 10.5.x.
3. Power-on DSL Modem and wait for it to initialise.
4. Power-on the AEB (main) and start your Mac computer.
5. Open AirPort Utility and select the AEB (main) in the LH pane. Click 'Continue' and give the AEB (main) a name and an admin password (twice). Click 'Continue'.
6. Select 'I don't have a wireless network and I want to create one', click Continue.
7. Give your network a name, select WPA/WPA2 Personal and insert the wireless network password (twice) - use 13 alpha/numeric characters for password. Tick 'Remember this password in my keychain'. Click 'Continue'.
8. Select 'I connect to the Internet with a DSL or cable modem using DHCP. Click 'Continue'.
9. Click 'Update' and wait for the AEB (main) to restart.
10. Disconnect the ethernet cable between your Mac and the AEB (main).
B. Setup Client computer
1. Open System Preferences/Network/AirPort.
2. Against 'Network Name:' select your network (the name you gave it at A7).
3. Click 'Advanced' and select TCP/IP. Against 'Configure IPv4:' select 'Using DHCP', then click 'OK'.
4. Click 'Apply' and exit System Preferences.

How can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

how can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

Hi,
This is currently not supported by iOS for any devices. Rumour is that iOS 5 will finally add this function, until then I'm afraid you are stuck with the good old cable.
Jamie

How do I extend an existing wireless network using airport express?

Hi all,
I am trying to extend existing wireless network using airport express, my main router is Belkin

Unfortunately, Apple's "extend" feature is designed to only work with other Apple routers if you are trying to "extend" using wireless only.
It is extremely unlikely that this feature would work with a router from another manufacturer using wireless only.

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal?

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal? What equipment & devices do I need to travel with to make this possible?

You may mean the AirPort Express.....not AirPort Extreme.....as the Express is a popular travel router.
The whole idea behind using this device is that the hotel must provide an Ethernet jack in the hotel room. Then you connect the AirPort Express to the Ethernet jack with an Ethernet cable and configure it to provide your own wireless network in the room. You still have to agree to terms, pay the fees, etc.
The problem with this approach is that it is getting very difficult to find hotels in North America that prrovide an Ethernet jack....most have moved to wireless networks and the others are not far behind.
So, if the hotel is already providing a wireless signal, the AirPort Express is of no use in that situation.
If you normally stay at the same hotels, and know that they provide Ethernet ports, an AirPort Express might make sense in terms of convenience.

How do I use Airport Extreme to limit internet time for my kids? His computer is hardwired to the modem.

How do I use Airport Extreme to limit internet time for my kids? His computer is hardwired to the modem.

You can set up daily time limits for each computer that connects using wireless, but it is not possible to do this when a computer is connecting directly using a wired Ethernet connection.
Open Macintosh HD > Applications > Utilities > AirPort Utility on your Mac and click Manual Setup
Click the Access Control tab below the icons
Select Timed Access
For more details on this, click the Help menu at the top of the screen and enter the following phrase into the search box:
Controlling access to your wireless network
A more sophisticated approach would be to use a service provided by OpenDNS. From your computer, this would allow you to monitor web sites visited, and block any unsuitable sites. More info is here:
http://www.opendns.com/landings/familyshield

How to fix poor wireless range using Airport Extreme?

Similar Messages

Maybe you are looking for