How to fix printer settings-only prints left side of page?

how do i straighten out printer settings as printer only prints left side of page.i have a 2008 imac.   thank you 

Have you contacted Canon Support? 

Similar Messages

  • Web pages are printed incorrectly, i.e. left side of page in p.1, right side on page 2. This started recently. Correct printer is identified.

    Firefox recently updated. Now, printing a web page results in left side printed on p.1, right side on page 2. Using the same Canon D9000 printer. Selecting horizontal format causes the left side of page to be printed 1/2 size on 1/4 page! Printing same web page with IE is OK. Printing from MS`Word is OK.

    All web pages? Or just some? Example of a page where that happens?
    Do those pages have '''Frames'''? <br />IOW, is the '''Print Frames''' section in the print dialog available (not greyed-out) for selecting '''''Each frame separately'''''?
    If that isn't a Frames issue, my advice is to do the '''reset''' described here. <br />
    http://kb.mozillazine.org/Problems_printing_web_pages#Reset_printer <br />Make sure you reset all the prefs for that particular printer.

  • HT3669 I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

    I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

    Check the printer itself.  Some printers you need to set the color & B&W settings on the printer itself instead of the Mac.   If that is not the case w/your printer, contact HP tech support and/or post in their forums if they have one. 

  • Photosmart 7150 - Prints left side of page only

    I have used my Photosmart 7150 for years. All of a sudden, prior to printing I get a "PAPER SIZE MISMATCH" message telling me to pull the photo slider out. The photo slider is all the way out. I press the "RESUME" button, and only the left side of the page prints. Does anyone know how to correct this?

    There may be more than one issue here. The photo tray issue may contribute to both issues. Try this link:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01839973&lc=en&dlc=en&cc=us&product=1153754&lan...
    See if this helps one or both issues.
    Our advice is strictly limited to the question(s) asked and is based on the information provided to us.  HP does not assume any responsibility or liability for the advice given. 
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • How do I set up my printer to only print in black?

    how do I set up my printer to only print in black?

    Please read this post then provide some details.  What printer model? What operating system?   Depending on your printer model you might remove the color cartridge, forcing black only printing, or select "Print in Grayscale" and "Black ink only" in the driver. 
    Some printer models (whether from HP or other manufacturers) may not allow printing in black if the color inks are empty.  There are also some other constraints, black only printing is generally not available when printing on photo papers and may not be available when printing with an automatic two-sided duplexer.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

    I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

    You're welcome. 
    But, no, don't look to  Epson for fixes to their  driver in newer versions, and Adobe has deprecated the TWAIN plug-in.  Hoping for a solution there is futile.  That has not happened and it's never going to happen.  The consensus is that it's pretty foolish to tie up Photoshop to scan.  Honestly.
    Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
    You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever.  When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software.  If you think about it, its most inefficient.
    VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist.  VueScan is not free, but it's a pretty good value, IMO.
    As for the Epson CD printing software, I have no clue.  Sorry. 

  • HO D110 series printer will only print half of page get error

    Ever since I got a new lap top that has Windows 8 my printer will only print half of the page and then stops. I get an error message. I have used the online Wizard and downloaded the new driver but it still won't work. Also can't print wirelessly still from other devices.

    Hello mrshayes,
    I saw that you have a new laptop with Windows 8 and now the printer is printing half a page and will not print any more. I understand you also cannot print from other devices. I have some suggestions for you.
    First, try to make a standalone copy from the printer itself. If the copy is successful, the printer tests out okay. If the copy fails, try resetting your printer and ensuring it is plugged in directly to the wall outlet, avoiding power bars, surge protectors, etc.
    Here is a link on how to reset the printer: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03177455
    If the copy works fine, see if there is a Firmware Update needed: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02919168
    Also, run the Print and Scan Dr. to detect any issues. This tool might fix the problem.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-126353-1
    Please let me know if you run into any troubles and I will do my best to help.
    Thanks!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Printer will only print from computer won't copy from printer

    My  printer will only print items that i send to it from y email. when i walk out to the printer and try to make copies the pages all come out blank no matter if i use the document feeder or place them on the glass directly. i have turned it off and back on but the problem was not corrected. 

    Hi @sandylouise,
    Welcome back to the HP Support Forums! I see you are not able to make copies from the front panel of your HP Photosmart. I would like you to go ahead and perform a Hard Reset:
    1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
    2. Unplug the other end of the cord from the power source.
    3. If there is a power module on the power cord, disconnect one end and reconnect it.
    4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
    5. Plug the power cord into the back of the printer.
    6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
    7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
    8. Connect any other needed cables to the printer.
    If after the Hard Reset you are still unable to make copies, please call our technical support at 800-474-6836 as it may be the hardware. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

    my hp 100 mobile printer will only print one page then quits. will not print all of the pages.  i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

    Hello colt1,
    Are you using Bluetooth or USB cable to connect to the printer?  Did you install from the disc, or from the online program?  When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.? 
    Thanks,
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Printer will only print for maps

    Just bought a new printer. We are trying to connect and we get the following message. We get the message printer will only print from aps. We can print with the chord but not wireless. We have a envy laptop

    Hi,
    Please run setup on your computer (using the CD) and select convert from USB to wireless.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • What would cause my printer to only print about 3/4 of a 4x6 photo on a C4795?

    What would cause my printer to only print about 3/4 of a 4x6 photo on a C4795?

    eee! So many posts.
    I currently have 2 harddrives hooked up. One has about 37.56 Gigs left on it (probably just over 3/4 full) and the other is nearly full. My files are saved onto it. I am editing in DV format and everything is rendered.
    I have a drive allocated as the scratch disk.
    I don't believe the drive is going to sleep. I would think it would effect my audio as well, since they are both located on the same drive.
    For what it's worth, I ended up ejecting the drive I was using as I needed to do some other work and my system seemed to speed back up. I reopened Final Cut with and it's like my system isn't bogged down anymore. I may try capturing to tape using a different drive and see if maybe it was the drive itself that was bogging down my system.

  • Laserjet P3500 printing solid black edge left side of paper

    Just started recently having this problem. Left side of page has solid black line about 1/4" wide top to bottom. I checked register of paper and it is perfect. Using windows XP Pro on a Dell computer. I checked the green roller and it is clean. Using genuine HP cartridge. Don't know what else I can tell you about this problem

    Hi there,
    Print quality troubleshooting pages
    Use the built-in print quality troubleshooting pages to help diagnose and solve print quality problems.
    Press MENU to enter the MENUS .
    Press (Down arrow) to highlight DIAGNOSTICS .
    Press (Select) to select DIAGNOSTICS .
    Press (Down arrow) to highlight PQ TROUBLESHOOTING .
    Press (Select) to print the pages.
    The printer returns to the Ready state after printing the print quality troubleshooting pages. If print quality defects are found when reviewing the print quality troubleshooting pages, perform a printer calibration. See the following section "Calibrating the printer " for more information.
    Calibrate the printer
    Calibration is a printer function that optimizes print quality. If experiencing any print quality problems, calibrate the printer.
    Press (Select) to enter the MENUS .
    Press (Down arrow) to highlight CONFIGURE DEVICE .
    Press (Select) to select CONFIGURE DEVICE .
    Press (Down arrow) to highlight PRINT QUALITY .
    Press (Select) to select PRINT QUALITY .
    Press (Down arrow) to highlight CALIBRATE NOW .
    Press (Select) to select CALIBRATE NOW .
    Wait for the printer to calibrate.
    You can also find the article for this product here:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?prodSeriesId=315862&prodTypeId=18972
    Under the troubleshooting section, click on print quality issues. There are more articles and there is more information regarding issues such as this located there if this doesn't fix the problem.
    Hope this helps!
    Help the community by marking this post as a solution if it solved your issue!.
    If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

  • I cant print and get this message, "adobe elements, "the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing."

    I keep getting this message when trying to print in adobe elements, I am using a new Epson WF-3640 printer
    "the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing.

    Hi,
    If you are working in PSE13, please update it to latest PSE13.1 update available and see if it helps.
    To apply update, you can go to Help > Updates and there you can see PSE13.1 update.
    Thanks,
    Anwesha

  • I've recently purchased an iMac and connected my HP Photosmart C4280 printer. The computer downloaded the driver software but the printer will only print in black and white.There doesn't seem to be anywhere to change this on the preferences menu. Any idea

    I've recently purchased an iMac and connected up my HP Photosmart C4280printer. The computer downloaded the driver but the printer will only print in black and white. I've looked in preferences etc but cant see any way to change this. Any ideas??

    Select a document, CMD+P, and set the color options as shown here:

  • When I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

Maybe you are looking for

  • What's the best quality way to download video taken on my iPhone 4s to iMovie?

    Looks like my only options are to email, message or send to YouTube. I want these videos taken to be put in iMovie. I thinking the quality and size of the video file is decrease by emailing it to me.

  • After downloading Lion and restarting my harddrive was wiped?

    I'm not sure if this is supposed to happen but after restarting it came up with a weird screen that had some startup icons like recover time machine and reinstall lion None of my stuff is on my computer anymore and the screen doesn't have a dock, I'm

  • Do anyone know how to get itunes to recognize my ipod for a mac?

    ii really ned this to work ASAP........

  • Change pointers problem

    I have created message type ZMATMAS  and I  want to see an entry in BDCP2 (Change pointers table) when ever any material is created or changed I did following steps until now.   1. Created ZMATMAS   2. Activated change pointers - BD61   3. Activated

  • Conversion of String

    Hi,      I want to convert data  like '1212' (It can be anythng upto 18 char) into '000000000000001212' (18 char).       Can anyone pls suggest which FM shld be used for the same. Rgds, rag Edited by: raghav on Jun 24, 2009 12:50 AM