How to fix problem in calling USA nos from app

When I'm calling a USA no. From my iPhone in India through apps like magic jack, sidecar I have to turn on the speake on. Even while in tango or viber conversation same problem exists.

Copied from one of your earlier posts.
There are no such apps provided by apple in Iphone
If these 3rd party apps you are having problems with are not official iPhone apps - official 3rd party apps are available in the iTunes app store, this means the apps are unofficial apps and the only way to download and install unofficial apps from anywhere besides the iTunes app store requires hacking the iPhone.
Regardless, the problem is with the apps. Any problem with a 3rd party app - with a 3rd party app feature that is not working properly is the responsiblity of the app developer. You don't contact Microslop in regards to a problem with a 3rd party app on a PC that is not produced/provided by Microslop. You contact the 3rd party app developer. The same applies with 3rd party apps for the iPhone.
This is not an Apple or an iPhone problem especially with a hacked iPhone.

Similar Messages

How to fix problems with AppleTV disconnecting suddenly from when streaming from iPhone or iPad

My AppleTV suddenly gets disconnected from streaminng when I use iPhpne or iPad. This didn't occur first 6 months from purchasing the item but now that my AppleTV is about 1.5 yr old, it happens pretty frequently and it really is annoying, when you try to watch 1+ hour long shows through streaming (AirPlay). Anyone know how to fix this problem? Note: this is not related to my wifi connection as other things with wifi works just fine when this is happening to my AppleTV. Thanks!!

That doesn't rule out a network issue.
Reboot ATV and router, make sure router is up to date.
Try Ethernet
Go to istumbler (Mac) or netstumbler (PC) to get a report of the network, look for signal strength and noise

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. this occurrs in the internet explorer and chrome browser, but in foxfire.

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire

How to fix problem of bypassing the submit button validation by pressing the space bar in the required fields. This occurs in the internet explorer and chrome browse but not in foxfire

[svn:fx-trunk] 13201: Fix RTE when calling PopUpManager.createPopUp() from a module or sub-application.

Revision: 13201
Revision: 13201
Author:   [email protected]
Date:     2009-12-23 12:16:41 -0800 (Wed, 23 Dec 2009)
Log Message:
Fix RTE when calling PopUpManager.createPopUp() from a module or sub-application.
This fix adds a moduleFactory parameter to PopUpManager.createPopUp() to allow a module or sub-application to specify the style manager to be used. Modules and sub-applications should always pass a moduleFactory to PopUpManager.createPopUp() or PopUpManager.addPopUp() to ensure the correct style manager is used when looking up styles. Otherwise the parent of the pop up is used to determine the style manager.
QE notes: Please create a PerModuleStyles test that uses the new parameter to createPopUp().
Doc notes: None.
Bugs: SDK-24835.
Reviewer: Alex
Tests run: checkintests, Managers/PopUpManager
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24835
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/IPopUpManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/PopUpManager.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/managers/PopUpManagerImpl.as

Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? by stephenftlaud

still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? bystephenftlaud

Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

How to fix problem "PYLR2000 error playing a file. Try again or contact your Monitoring and Recording administrator"

Hi,
I'm using qm 8.5.2 (endpoint recording) most of customer PCs cannot play recording file in application.
When I launch application and try to play recoding file, it is stuck and show error message "PYLR2000 error playing a file. Try again or contact your Monitoring and Recording administrator." I've install all cilent requirements (validate pc is pass). The error still occur. Even though all requirements are complete .
So, How to fix this problem.
Thank in advance
Namkhao

Hi bsetexast,
I'm fix this problem by using Java(TM) version 6.0.200.2 that can be download from UCCX when first run CSD (supervisor desktop). Even other higher java version is valid but this problem still occur. If you install higher version, you should uninstall it first and install this version as well.
If you cannot find them, I will send you via email.

Anyone know how to fix problem of not being able to import RAW files of Nikon D800 to Lightroom 5.2?

Hi there, am failing miserably to import NIKON D800 RAW files into Lightroom, have updated to version 5.2 which Adobe website says is compatible, but still no luck. Can import PDF files of Nikon D800, and my RAW files are fully accessible via Nikon proprietary software such as ViewNX2 and Capture NX2. Have Microsoft OS Windows 7 (if that helps..). Anyone any idea how to fix this problem? Grateful for any ideas, Ruud

Dear Jim, you have set me on the right track, thanks! I have updated my Nikon View NX 2 software (which includes the transfer software from camera to hard disk) and this has done the trick. Many thanks, also to Keith for showing interest in my problem. Downside remains that the files previously loaded with the old software remain 'un-importable', so if anyone still has a good tip how to try and correct that...
.. all ideas are welcome!!
But as said, many thanks for helping me solve the issue for future downloads
Ruud

How to fix low in call volume

How to fix in call low volume ?

Hi Fantasiadunlap,
If you are having receiver or call volume issues with your iPhone, you may find the following article helpful:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Regards,
- Brenden

Problem while calling a report from the report

Hi
i want call a report from the report, i have written URL in the Hyperlink and its working
but
1) i want open it in the diffrent window.
2) suppose if u have a report called emp it should call antoher 2 report at a time.
( how to put 2 URL in the hyperlink?).
i,e if i press a hyperlink it should open emp1 and emp2
Please help me.
thanks and regards

Thanx,
I have solved this problem.
Regards,
Hafeez

Problem in Calling a report from form 6i using parameters

Hello Oracle experts,
I am facing a problem while calling a report using form 6i and passing parameters,
Actually the problem is I want to use the parameters passed to reports in a
query group in my report. I am not able to use the parameters passed by form to report in one of my query groups in report. Could anybody guide my how to use it.
Thanks

Hello Oracle experts,
The parameters are getting passed successfully in my report.
But I want to know hous to use it in my query group.
I just want the syntax.
Thanks

Problem in calling JSP page from a servlet

can anyone please tell me how to call a JSP from servlet?
My code is:
ServletContext sc = this.getServletContext();
                                             RequestDispatcher rd = sc.getRequestDispatcher("./Welcome.jsp");
                                             if (rd !=null)
                                                  try
                                                       rd.forward(req, res);
                                                  catch (Exception e)
                                                       sc.log("---------------Problem invoking JSP.------------------", e);
I n the browser when i call this servlet it gives error-404.
NOT Found.
please help.

I would try to change "./Welcome.jsp" to "/Welcome.jsp". I'm not sure what that period will do.
Are you able to access that JSP directly from your browser (even if it's not designed to be accessed that way)? If not, then you have some other problem.
When you say you get a 404 when you access the servlet, is that when you access the servlet, or when it tries to forward to the JSP? If you get the 404 when you access the servlet, perhaps your servlet-mapping to the servlet is invalid.

How to use @jws:sql call Stored Procedure from Workshop

Is there anyone know how to use @jws tag call Sybase stored procedure within
Workshop,
Thanks,

Anurag,
Do you know is there any plan to add this feature in future release? and
when?
Thanks,
David
"Anurag Pareek" <[email protected]> wrote in message
news:[email protected]..
David,
In the current release, we do not support calling stored procedures from a
database control. You will have to write JDBC code in the JWS file to call
stored procedures.
Regards,
Anurag
Workshop Support
"David Yuan" <[email protected]> wrote in message
news:[email protected]..
Anurag,
I know how to use DB connection pool and create a db control with it. In
fact, we have created a Web Service with the db control using plain SQL
in
@jws:sql. However, my question here is how to use @jws tag in Weblogic
Workshop to create a Web Services based on Sybase stored procedure orany
Stored Proc not plain SQL.
Thanks,
David
"Anurag Pareek" <[email protected]> wrote in message
news:[email protected]..
David,
You can use a database control to obtain a connection from any JDBC
Connection Pool configured in the config.xml file. The JDBC Connectionpool
could be connecting to any database, the database control is
independent
of
that.
Regards,
Anurag
Workshop Support
"David Yuan" <[email protected]> wrote in message
news:[email protected]..
Is there anyone know how to use @jws tag call Sybase stored
procedure
within
Workshop,
Thanks,

Problem when calling a report from java

Hi all,
i have created a report using ireport which contains arabic data.
when i execute the report from ireport to generate a pdf file it works.
however when i call this report from java i have an exception"
Could not create the report Could not load the following font :
pdfFontName : ARIAL.TTF
pdfEncoding : Identity-H"
the pdfFont i used it in ireport, also the pdfEncoding.
did anyone passed with the same problem
thanks for help

Hello Oracle experts,
The parameters are getting passed successfully in my report.
But I want to know hous to use it in my query group.
I just want the syntax.
Thanks

Problem n Calling Report 6i from Forms 6i

i have a problem with calling any report ( Report 6i ).
the problem is when i call any report from the Form 6i sometime its hang ,and the message from the Windowx XP will shown when any application is not responding , and the Form hangs also and need End Task to close it.
there is no sequence of hanging , sometimes third calling of the report ,sometimes forth and sometimes from the first calling of any report.
is it that Report 6i not compatible with the windows XP or 2000 and need some file or is it the problem from my code..???
i used this code:
DECLARE
pl_id ParamList;
begin
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
add_Parameter(pl_id,'Q',text_PARAMETER,' and PA_M_HUMAN_SRL = '||:PA_M_HUMAN_SRL||' and ee_t_exit_entry_no = '||:EE_T_EXIT_ENTRY_NO);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
Run_Product(REPORTS, 'C:\HRS\PROSYS\REP\r_exit_per_rp.rep', SYNCHRONOUS, RUNTIME,FILESYSTEM,pl_id, NULL);
...

Abdulla,
2 things
1) Make sure you are on a recent patch that as a minimum is path 13 for XP support (I think it was patch 13)
2. Try
Run_Product(REPORTS, 'C:\HRS\PROSYS\REP\r_exit_per_rp.rep', ASYNCHRONOUS, RUNTIME,FILESYSTEM,pl_id, NULL);
to run it asynchronously to eventually see an error message displayed
Frank

How to fix problem in calling USA nos from app

Similar Messages

Maybe you are looking for