How to fix runtime error R6034 when using Microsoft Vista on an HP computer. Started with the last itunes update.

Problem started after loading last itunes update. Uninstalled itunes from my HP but still getting error message when I start up the computer. Is there a new update on itunes?

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Similar Messages

How to correct Runtime error R6034 when attempting to update iTunes on PC?

How to correct Runtime error R6034 when attempting to update iTunes on PC?

Hey ievafromsa,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

IPad Reply box disappears behind keyboard as I'm typing which, if a long messages, means I'm typing "blind". This started with the last IOS update. How do allow the writing screen scroll up?

IiPad reply screen disappears behind keyboard. This happens on a long message in email and I need to type "blind" if the message is even medium long. How do I get the typed area to scroll up as it did before the latest IOS update?

I,m having and identical problem. In fact when I went to type this my split keyboard is dead center on the page.
When I hold down the button on the bottom right corner when I'm in split mode I get the option to Dock and Merge or just to Merge. There is no option where the keyboard stays split once it's been docked and merged.
Help! I have small hands and it's so much easier to type in split screen.
Thanks.

I have a runtime error R6034 when i try to log in to itunes so i unistalled itunes prog from my pc and tried to download itunes prog again but no luck still keep getting this error

I am having major problem. a while ago i downloaded a programm from the internet and there was an error so i uninstalled as i was unable to use it. Since this application, Everytime i log on i get dialogue box opens up Microsoft visual runtime library, Runtime Error R6034. An application has been made an attempt to load the C runtime library incorrectly.please contact the application support team for more info.and every time i tried to open itunes on my desktop i receive this message.So i have just unistalled itunes logged on to apple to try and download the itunes prog ,but it dont seem to have downloaded.can anyone help me please.

So i have just unistalled itunes logged on to apple to try and download the itunes prog ,but it dont seem to have downloaded.can anyone help me please.
Could you walk us through what happened when you tried to do the download, please?

Runtime error r6034 when try to open itunes

How do I fix runtime error r6034?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

HT1926 I'm attempting to reinstall ITunes because of a runtime error (R6034) when I start it. At end of install it says 'Apple Mobile Device' failed to start. I verified that I have admin privileges. Can anyone help?

I'm attempting to reinstall ITunes because of a runtime error (R6034) when I start it. At end of install it says 'Apple Mobile Device' failed to start. I verified that I have admin privileges. Can anyone help?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

How to fix runtime error 6025 in iTunes?

How to fix runtime error 6025 in iTunes?

Hey deangelofromtx,
Thanks for the question. I understand that you are experiencing issues with iTunes. The following resource may provide a solution:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

TS2570 I am getting runtime error R6034 when opening iTunes i have followed all instructions on reinstalling and it still occars

I am getting runtime error R6034 when trying to open iTunes I have followed all instructions for reinstalling iTunes but it still occurs can any help please?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99537)

The last itunes update has failed - getting error program C:/program files (x86)\itunes\itunes.exe - R6034 attemp tp load C runtime library incorrectlly. I have tried to repair and reinstall. getting same error - can ayone help

the last itunes update failed - getting error R6034 attemp to load C runtime library incorrectly. Program reference - Program C;/prgram files (x86)\tunes\itunes.exe - can anyone help. I tried to use epir and did an uninstall and reinstall and still geting same error

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried ch

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?

I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

I can only listen to music in iTunes when i'm connected to the internet. Everything seems to have uploaded onto iCloud - something I didn't sign up for. Happened with the latest iTunes update. Help!

I can only listen to music in iTunes when i'm connected to the internet. Everything seems to have uploaded onto iCloud - something I didn't sign up for. Happened with the latest iTunes update.
All of the music is still on my computer, but when I play it through iTunes, it either buffers first (when I'm connected to the internet) or it is greyed out (offline) and I can't listen to it.
This is beyond annoying. Is there anything I can do to sort this out?
Cheers.

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
Check out the following KB Articles: http://support.apple.com/kb/HT1329 How to use your iPod to move your music to a new computer
http://support.apple.com/kb/HT4527 iTunes: How to move your music to a new computer

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Lightroom 4 crashes when trying to open the slideshow module. I spent over three hours with both Adobe and Apple tech support and we know it is a permission issue but have not been able to get it solved. It started with the last upgrade to 10.8

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
The first step should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
resetpassword
That's one word, all lower case, with no spaces. Then press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Itunes locks up my computer every time I try to start it. This has happened with the last few updates so I have not used it.

itunes locks up my computer every time I try to start it. This has happened with the last few updates so I have not used it.

Hello oldsurfer250,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning iTunes for Windows issues:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717http://support.apple.com/kb/ts1717
If iTunes for Windows Vista or Windows 7 won't open, stops responding, or unexpectedly quits, try using the steps below. You may want to print this document before following these steps.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

How to fix runtime error R6034 when using Microsoft Vista on an HP computer. Started with the last itunes update.

Similar Messages

Maybe you are looking for