How to fix 'save as' dialogue window?

This happens in all of my Adobe software as well. But, when I go to save a file on my 2nd monitor the dialogue window is un-usable and can't be moved.

Reset preferences or try to change the resolution of your screen temporarily.

Similar Messages

  • How i fix the problem on windows 7  itunes could not connect to the iphone because an invalid response was received from the device

    How i fix the problem on windows 7  itunes could not connect to the iphone because an invalid response was received from the device

    take a look at https://discussions.apple.com/message/24243668#24243668.  i had this problem and that solved it for me.

  • How to Fix my Error in windows 8.1 64 bit

    Hi, I have many errors at my Asus A46CB core i5 like error System Thread not handled, error equal or less
    and error power driver state failure. my laptop will restarting and run normal after that.
    how to fix my laptop? my OS is windows 8.1 enterprise RTM 64 bit.
    please help me because i'm very confuse and crazy with this error. 
    i'm very thankfull if there's someone to help my problem.

    Hi
    Sorry for the late respond
    I check the dump file, try to update your graphic card driver and others driver if haven't update yet
    http://support.asus.com/download.aspx?SLanguage=en&p=3&s=431&m=A46CB&os=&hashedid=n%2fa
    You can also learn how to check dump file using
    this or this
    Semoga berhasil

  • IMac: How to open/save a Safari window of tabs on another screen page?

    I would like to open another Safari window on a new page in order to scroll between the two screens on my iMac.
    But when I open a new Safari window it opens ontop of the present Safari window ... (not - as hoped for - on a separate screen).
    Can I open and save a new window on another screen. Please advise me on this if possible. Thank you.

    Hello patongandy,
    It sounds like you are opening a new window in Safari, but it is opening on the main display and you would like to move it to your other monitor. You can do this with mission control as outlined in the following article:
    OS X: Using multiple displays in Mavericks
    http://support.apple.com/kb/HT5891
    Using Mission Control to organize windows and full-screen apps
    App windows are assigned to a single space. You can use Mission Control to see all of the Spaces assigned to each display and to move them. To move a Space, drag it from one display to the other.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • Cant figure out how to fix my labtop, Acer Windows 8

    Hello,
    Something was uninstalled on my labtop (acer, windows 8), it was something that had to do with office. So now when I try to open any files made in word, excel, powerpoint, ect. They wont open.
    This is what I have tried and gotten no luck:
    1) I tried reinstalling Office Mircrosoft Professional Plus 2013 (This is want I installed when I first got the laptop). When I put in the disk it asks me if I want to run it, when I click on YES, another message pops up saying: Something went wrong,
    sorry we ran into a problem, try going online for additional help. (Which hasn't been helpful).
    2) I tried doing a System Restore, but it ran through the restore and didn't change anything. I tried doing it again, but it now wont even let me do a restore. So I tried the Advance System Recovery, but it wont run also.
    3) I then went into the Run System File Checker tool to troubleshoot the issue. A list of all the programs (expect for office) popped up and the only problem it
    came up with was that the Blue Tooth Audio Device has a driver problem and needs to be reinstalled. But I don't know how to do that. And I'm not sure what I'm even looking for in the list of programs for the troubleshooting.
    Also, other issues I'm having is that its telling me I cant change things unless I'm the admin, but I am and I don't have any other user accounts set up. It also tells me I have things open in other accounts and so I cant make
    changes to whatever it is at the moment I'm trying to change. I've been trying to change a few things not know really what I'm doing.
    Any advice or steps to take to figure out how to get my labtop working like normal?
    If the issue still exists, run System File Checker tool to troubleshoot the issue:
    1.    
    Insert the Windows 7 installation DVD into the DVD-ROM; Click Exit if the auto-menu pops up.
    2.    
    Open an elevated command prompt. To do this, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
    If you are prompted for an administrator password or for a confirmation, type the password, or click Allow. 
    3.    
    At the command prompt, type the following command, and then press ENTER

    Do you mean in your from field or the signature field?
    where does it show up...? it wouldn't be on the iPhone as that doesn't show a from field. Check the account details in MM open it up go to settings and check you typed it in right simple as that if it's on someone elses hardware when they recieve an email from you then they need to fix your name in their contacts.

  • How to fix Unknown device in windows 7

    Hi
    I have just install windws 7 pro on HP Envy dv6-7200SA Notebook PC
    When I open Unknown device Properties, I see following in details
    For
    Other devices
           - Unknown device
                     ACPI\HPQ0004
                    *HPQ0004
    How do I fix it.
    Please can you help me.
    thanks
    Ish
    This question was solved.
    View Solution.

    Hi,
    The hardware id is for HP 3D DriveGuard - the driver you require is on the following link,
    http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64144.exe
    When the installation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Saving a setting in the Save As Dialogue Window

    I feel like I'm overlooking something here. I use Preference Manager to keep the same user settings on all my computers at my school. In the Save As window I would like the expanded view on where to save using the column view. Is this a Preference Manager situation or something in the OS?
    We use Carbon Copy Clone to install on our computers. I'm going to be restoring the computers with CCC but I'd like to get the Save As window correct before I start. Can anyone point me in the right direction?
    Thank You for your time.

    Thank you for your input. That's the setting I want to save. Right now I have to manual do that. I'd like it to be open as the default. Most of my students are so new to the Mac OS let alone FCP. I need to simplify as much as possible. It used to do this but now I can't get it to save that as the default.
    I've created a new Preference Manager and that's why I think it may be the culprit. I have gone into FCP and opened the expanded view. Then I save those preferences. I take the Pref. Man. file to another computer. Load the preferences and I still have to choose it manually.
    It's obviously not the end of the world if I can't get it. The thing that bugs me is that it used to work. I might just have to get the old Pref. Man. file and make the current updates to the older one. This is normally how we make a new file but then we don't keep the old file around.
    Any other suggestions?

  • What is, how to fix, stop, small popup window from 'plugin-container.exe' with 3 digit number that won't stop re-appearing???

    I get very small windows popping up on the screen on top of anything else I'm doing regardless of what apps I'm running or not running. If I R-click on the icon in the task bar, it's identified as "plugin-container.exe"
    The window doesn't say why it's there, but only displays a 3 digit number (for example the on on the screen now says 587) and allows only the usual X to close, or an 'OK' button to close. But a short time later it pops up again.
    I'm running Windows 7 64bit MS Security Essentials and Firefox, though it will pop up even if I just booted and haven't started Firefox yet.
    It's really (really really) annoying. How can I fix it or disable it or whatever it takes to make it STOP.
    Perhaps if I had some idea what it was I could attack it that way, but I haven't a clue. BTW, I've cleaned the registry, and done full scan's for virus and turned up nada.
    Thanks.
    D.

    As per the web site:
    There will be no update to Waterfox 25.0 as a bug causes Adobe Flash to crash on 64-Bit Windows 7 systems. Bug here. Although Firefox 25.0.1 is now available and we could build it, there would be no point of releasing a new version of Waterfox for only two weeks.
    I mostly only use Waterfox and had no problem in the past. I suspect a flash problem may be at the root of my problem however.
    As stated, I've performed (full) virus scans with MS Security Essentials. Also with Housecall, and also with HiJackThis. No problems detected.
    Screen shot of popup window attached.

  • How to hide save changes alert window when no changes made to the form

    hi,
    in my form when i close the form without making any changes it displays do you want to save the changes alert.how to hide this alert when no changes are made to the form window.
    regards
    Yesukannan

    Be advised that this solution will also exit the form without saving the changes and asking anything if the user did make changes.
    You're probably changing some field from a PL/SQL trigger (hint: post-query or when-new-record-instance are likely). If you set the value of a field from a trigger or program unit that also marks the record as changed for Forms. Forms will then ask to save the changes when exiting the form.
    If you want to prevent this, reset the record status after you change the field in the PL/SQL code.

  • How i fixed my Itunes sound (windows)

    Hello,
    I along with many members of this forum have been having serious sound issues. I have somehow managed to fix it tonight, as well at quicktime playing the distorted green videos. I did 3 things, and i dont know which 1 did it, but i encourage everyone to try all 3.
    1) Reinstall your sound drivers (I have an Audigy 2 ZS)
    2)Open quicktime settings and click advanced at the top, then click "empty cache" and check the box saying "enable playback of flash tracks"
    3)Redownload DirectX9 and run it. When you open it, it will almost instantaneously say completed, but do it anyways. Reboot the computer and try
    Please let me know if this helps anyone, I hope this can fix it for some of you!

    bump
    I was having trouble seeing my Nano 2nd in iTunes and was afraid to do this step; but it works. My Nano was updated to version 1.1.1 and now everything seems to work perfectly. Keep in mind you will lose everything that is stored on your Nano when you format it.
    Gateway 733mhz   Windows XP  

  • How to fix itunes error 7 (Windows error5)?

    downloaded and used itunes, on laptop(Acer), but when I tried to reopen I get error message, Not installed properly. Reinstall itunes. Error 7(Windows error5). Why does it work fine, but then not work, and display this error message days later?

    Hi surferman!
    It sounds like you will need to uninstall and reinstall iTunes to fully resolve this issue. iTunes requires that the components of iTunes be uninstalled in a specific order from the control panel, and that specific order can be found in this article about uninstalling and reinstalling iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    It is important to note that:
    iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
    These steps may take a significant amount of time to complete, depending on your system.
    If you run into any issues while attempting to reinstall iTunes, you may want to reference this article as well:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • How to fix "access denied" in windows vista with Deskjet 3056A J611 Series

    I am really struggling with getting the printer recognized in windows vista 32 bit. No matter what I try (including HPPSdr)
    I keep getting "access denied" or windows cannot print?!
    Does anyone have a solution to this?
    HELP!

    I'm sorry, but the subject seems to have been cut off. What Printer are you using? How is the printer connected to the computer, USB, wireless, or Ethernet? Is the printer installed and when you use it you are getting this message, or are you getting this message during installation?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How to fix PDF-Preview on Windows 7 x64

    Hey Folks, I'm recieving this Error, with Adobe Reader 11 beeing the only PDF-Reader on a Win 7 x 64 system.
    Please wait...
    If this message is not eventually replaced by the proper contents of the document, your PDF
    viewer may not be able to display this type of document.
    You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by
    visiting  http://www.adobe.com/products/acrobat/readstep2.html.
    For more assistance with Adobe Reader visit  http://www.adobe.com/support/products/
    acrreader.html.
    I found some articles about this, but they are all Debian-Based, so I hope some of you ar abled to help me.
    Regards,
    b1naryb0b

    I checked it and on the PC's web browser Adobe Reader is the default program for opening PDFs.
    Maybe there is a misunderstanding. The problem is not occuring in the webbrowser preview. This occurs in the windows preview. Do you have any other ideas?
    Thanks for your help in advance

  • How to fix error 3014 on windows?

    it wont restore i just get error message "3014" on windows computer

    Hey giovani7799,
    Thanks for the question. I understand you are experiencing error 3014 when attempting to restore your device. The following article addresses this error message and potential resolution:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Resolve communication issues
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Common errors: 1004, 1013, 1638, 3014, 3194, or 3000-3999. These alerts refer to gs.apple.com, say "There was a problem downloading the software", or say the "device isn't eligible for the requested build".
    Thanks,
    Matt M.

  • AddThis Button is gone after the last update. Also when I click on add ons, then select the options button on any add on the add on screen locks up and I have to shut down firefox. Any Ideas how to fix this? Running Windows XP.

    After the most recent Firfox update, the Add-on page locks up when I click on options for any add-on. Also my AddThis button is gone.

    # Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
    # Sign back in, and you will be asked to save the password you entered.
    # This will save the password and autocomplete if you have this option turned on.
    I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]

Maybe you are looking for