How to fix scan lines

Hi,
I have dozens of scanned images (from 35mm prints) that have a thin line running all the way across the width at the center.
The 35mm print is fine , does not have the thin line , and the scanner is no longer available to re-scan the 35mm print.
Is there a tool / technique in iphoto that can fix/remove the thin line in the scanned images ?
Thanks.

It really depends in the amount of damage but you could experiment with most serious editors.
In order of price here are some suggestions:
Seashore (free)
The Gimp (free)
Graphic Coverter ($45 approx)
Acorn ($50 approx)
Pixelmator ($50 approx)
Photoshop Elements ($75 approx)
There are many, many other options. Search on MacUpdate. You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.

Similar Messages

How to fix white line on top while using personas ?

Everytime I set a persona for Firefox I get a white line on top, I heard that it can be fixed by modifying the pref.js file, but I don't want to mess that up.

Here's a picture of how it looks by the way.

How to fix bad line spacing with custom image bullet when displaying on iPad

So I have a presentation with custom image bullets for a couple slides. The bullets are fine when displayed on a mac, but when I move it over to the iPad the line spacing of the bullets and the text gets further out of horizontal alignment the more lines I add. I've tried adjusting the size of the bullets larger and smaller to see if that would help but it makes no difference either way.
I know the easiest thing is to get rid of the custom image bullets, but this issue makes no sense to me and I'd really like to solve it.
Here's how it looks on the mac:
Here's how it looks on the iPad (took a photo and I know it's a little warped but I've shown where the issue is occurring):

-> press '''CTRL''' + '''0''' (zero) to '''Reset''' Zoom
* For details, see this article -> [[How do I use Zoom?]]
Check and tell if its working.

How to fix grey line on ipad 1 screen

Hello
My ipad 1 has a grey bar across the middle of the screen, ive read this is a problem that alot of people have had. How can this be fixed?
thanks
felgs24

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
If that doesn't help then there is most likely a hardware failure. Time to replace the iPad with a newer model.

How to fix Parallel line ends?

Hi,
I did a parallel line using White Arror Select> Copy> Object> Path > offset. I got the parallel lines but the ends are not opened. It was Mitre selected in the popup box. Here is the image and hope some one can help me. Thanks.

Yes, I use Sketchup and LOVE the Path Offset feature. Adobe could learn a lot by looking at Sketcup.
In your case, I think the simpliest option is creating a custom pattern brush.
There is a lot to building a custom brush, but this will get you started.

Help: how to fix a line in this script (almost good) for change text to real UPPERCASE?

app.findGrepPreferences = null;
app.findGrepPreferences.findWhat = '\\l\\l+';
app.activeDocument.characterStyles.item("SC");
foundList = app.activeDocument.findGrep(true);
for (i=0; i<foundList.length; i++)
foundList[i].changecase (ChangecaseMode.UPPERCASE);
The idea is to select the magenta words in scaps to be setted in uppercase.
The problem is the script (based in Jongware and P. Kahrel) is converting all texts to uppercase not assuming the condition under “SC" character style.
instead, it is changing all the text:

try:
app.findGrepPreferences.appliedCharacterStyle = app.activeDocument.characterStyles.item("SC");
*not tested

How to fix this line in as3?

Hi,
I'm trying to create a gallery with two buttons, previous and next, to change images with the click on the button.
I've found a tutorial but it's for AS2...I've tried to change it, but I receive error 1119.
Here's the code
next_btn.addEventListener(MouseEvent.CLICK, straight);
function straight(myEvent:Event) {
    if (Stage.currentFrame == 37) {
        gotoAndStop(32);
else {
    nextFrame();
I receive
Error #1119: Access of possibly undefined property currentFrame through a reference with
static type if (Stage.currentFrame == 37) {
Where is the problem?! I'm going crazy.
Thanks so much.

The stage reference you will get in "stage" variable and not "Stage".
AS3 is case sensitive , adding to that, "Stage" is the class name while "stage" is the current instance of Stage class and refes to the current stage.

How fix blank lines on scans using MF5770

how fix blank lines on scans using MF5770. Already restarted Win 7 computer and MF5770. Using Windows fax and scan. Several months of successful use before this problem began last couple weeks. 9/2014 Thnks for any help

Patrice,
Thanks for your reply and questions. See my responses in the body of your text pasted below
So that we can better assist you, how is the printer connected? Is it connected directly to the computer with a USB cable,YES ITS CONNECTED BY A USB CABLE LESS THAN 10' LONG FROM THE BACK OF THE MF 5770 TO A USB PORT ON THE BACK OF MY DESKTOP COMPUTER or with a LAN cable to a router? If it is connected with a USB cable, how long is the cable, and are there any devices,NO DEVICES such as a USB hub or extender, connected between the printer and the computer? Finally, which version of Windows 7 are you running on your computer? Is it the 32-bit or 64-bit version? 64 BIT VERSION SERVICE PACK 1 PROCESSOR AMD PHENOM II X4 810 2.61 GHz INSTALLED MEM 4 GB
Chip Hazel
[Mod note - removed personal information PER FORUM GUIDELINES]

Can't get BT to fix a line at new property, how to...

Since we moved address on the 7th March we have not had a working phone line, just a series of BT mistakes and delays.
Series of events:
We booked a house move 3 weeks prior to moving on the 7th March
7th March we got a text saying your line has moved, but clearly hadn't as no dial tone
7th March contacted BT, who said yes your line has moved, and no we cant record a fault until midnight in case it hasnt been moved, the sort of twisted logic you have to fight through
8th March, finally got fault registered after arguing with a very unhelpful Indian call centre, who wouldn't believe we didnt have a line because it was showing as engaged - the fault as it turned out.
11th March - order BT infinity with a delivery date of the 26th March thinking is a simple problem.
13th March - Diagnostic shows it is a fault with the BT network, two BT openreach engineers turn up, who detect the fault is in an underground cable 100 yards up the road, mark up the road and tell us they will report it to the dig team, should be later that week, early next week.
22nd March - After much chasing through the Indian call centre, who after explaining that we need to know when they are going to dig and fix the cable, are getting told such unhelpful things as have you tried a different phone in the socket. Finally get a call back to say the hole has been dug today to fix the trunking, the cable guys will arrive Monday. I explained that no digging had happened, to which she said she would get back to us.
25th March - Another phone call to tell us quite bluntly that the digging team had more important jobs, and as we are just a residental line the digging won't now happen until the 5th April. We ask if there is any point in sending the Infinity engineer out, and they want to do so anyway.
25th March - Cable guys turn up and point out the digging hadn't happened so they can't do anything. Nice to see they don't talk to each other either.
26th March - Infinity engineer turns up at our old address, and needs re-directing to us, says he needs a working phone line, but he will do what he can. Plugs in the box that did arrive at the new address, disappears for an hour and comes back to tell us the exchange equipment has been installed in the local exchange for the old address.
27th March - BT phone, no apology, just blame the engineer, re-arrange infinity for 12th April.
30th March - Talking to new neighbour he tells us that the cable was crushed by some digging work at the beginning of December 2012 and they had no phone line for December, until BT realised there were some working pairs in the crushed cable and switched them, then didn't bother to repair the cable. Leaving a nice little time bomb until we asked for a line.
5th April - As expected nothing happens.
8th April - No contact as yet.
I would like to cancel the whole lot and go with someone else, knowing they will still need to get Openreach to fix the line, but hopefully another provider that doesn't consider residental lines to be unimportant, and don't use hopeless Indian call centres. As BT have never delivered a working service from the beginning of the new contract they insist on when moving, how do I go about doing this?

i fully understand your frustration. it will not be a quick solution
on the 1ST OCT i ordered, from BT, a phone line connection together with there broadband package. This was to be re-installed into a farmhouse that i have been renovating. I ran a underground service duct from the existing pole into the house. It was my simplistic view that bt would simply send an engineer to run a line through my service duct and connect either end, SIMPLES!
At the end of Nov, and after a series of engineer no-shows, we get an engineer. Hooray this must be it. This engineer persuaded my wife to help him feed the wire through the duct, he then made the connection and declared that he would have to travel 6 miles to our local exchange to turn the line live. An hour later he returned and announced that he could not find any fault but that the line was not working.
I then made a series of phone calls to eventually get another engineer out in December. When he turned up he did not have a clue as to what he was to do. He thought he was there to simply connect the line. Eventually i managed to make him understand that the last engineer just gave up. This engineer did make some effort to problem solve. He dis-appeared in his van to climb some poles and look in some boxes. after a couple of hours he returned to announce that he thought there was a break in the line 500m away. he could not do anything about this and he would get someone to contact me with a solution
In February i then recieved a letter from BT saying that they were sorry that i had cancelled my order and that they would be refunding my money that i had already paid. I called them immediately to explain that i did not to cancel anything i just wanted a phone line.
Hey presto another engineer turned up. This guy seemed to be on the ball. After just 1 hour he had located the break in the line. He then marked on the road surface "BT DIG HERE" and left us saying that things would now get sorted
Weeks came and went and still no sign of action until i found they had refunded the cost of the installation directly back into my bank account!
So i called BT today. Apparently because i had not been using the phone line they had cancelled the order!
I am getting to the point where i am considering forgetting the phoneline. Satellite internet connection may be expensive but it seems that the speed is consistant and i do not have the painful experience of trying to deal with BT
Has anyone else had similar probelms with BT
Has anyone else gone down the internet over Satellite

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

I had this same problem with what's app. There is a new update for the app on the app store which is compatible with ios8. Update the app, or delete it and re-add it. I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.

The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

The screen resolution in 1920x1200 dropped on my MacBook Pro 17". Seems like I have not the same pixels. There are also vertical, thin lines on the screen. Makes the screen look milky. Anybody knows what's going on and how to fix it?

Take it to an Apple Store or other service provider for testing.

White line onscreen in all applications. I do not know if I did something or if this is some problem. Everything seem to be working alright otherwise. Any suggestions on how to fix this p

I have an eight year old IMAC with the Intel dual core. Today for the first time a fine white vertical line appeared on screen in all applications. I do not know if I did something or if this is a larger problem. Everything else seems to be working alright. Any suggestions on how to fix this problem would be appreciated. Thanks.

Eight-year old iMacs did not have Intel processors. Please do "About this Mac" from you Apple menu to see something like this:
Please post the "Version" under the big "Mac OS X" and the "Processor" information. These can make a big difference in advising you how to proceed.
iOS 4.1 currently shown in you profile will not run on a Mac computer; it is only for iDevices (Pads, Pods and Phones), so fixing that in your profile can help you get answers faster because people won't to ask for more info before forming an answer.

My i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this???

my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help

If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
**Imediately backup ALL your important data while you can still see things on the monitor
Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
perform SMC reset just to check:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

How can I fix this line please

Hello Everyone,
I have in a form the following line
<*font size="1" face="Verdana, Arial, Helvetica, sans-serif"> Champs obligatoires </td><td align="right"></td></tr>
</table></td></tr></table></form>
When I hit apply the words champs and obligatoires break on two different lines. There is space for them to be displayed next to each other.
I cannot see how to fix it. Would someone be kind enough to tell me what I am missing?
Thank you in advance
Mireille
Message was edited by: Mireille Green1
Message was edited by: Mireille Green1

Old toad,
thank you for your help.
The whole form is a subscription form and it is quite long that is why I did not put it all here. This is the end of the form and while the word was in English it worked fine I translate it but it takes 2 words instead of one and they split.
There is no asterisk in the code I just put it there so I could display the code it kept changing on me while posting.
Here is the last lines
*value="Effacer" /> </td></tr>
<tr><td>** Champs obligatoires <*/font></td><td align="right"></td></tr>
</table></td></tr></table></form>

ignore all asterisks.
If you want to see the form in its entirety it is here
http://www.clubiweb.com/ci/Abonnement.html
Thanks again
Mireille

How to fix monitors display horizontal line occuring issue?

Dear friends,
Am having HP W19 Monitor ,In this am facing Display line (horizontal ) occuring problem...how to fix it?..
Can anybody help me please...

Hello Nilav_Technical,
That could either be the monitor or the PC, perhaps the cable.
Try another monitor to see if the problem is the same, if it is then the cable or the PC's graphics card are the problem.
If the other monitor is OK then you will need to replace the monitor.
You might also want to change the refresh rate in advanced settings under screen resolution and see if that helps.
Let me how it goes.

How to fix scan lines

Similar Messages

Maybe you are looking for