How to fix shortcuts problems with foreign keyboards and photoshop in english

Some shortcuts won't work with a non english keyboard and you'll have to switch to english keyboard to fix this but it's not always practical
You can use a program from Microsoft available here to customize your keyboard
http://msdn.microsoft.com/fr-FR/goglobal/bb964665.aspx
It works well with Win 7 64 bits and it's easy to use !
And you can still use your normal keyboard with others application (windows can switch automatically keyboards)

There is too much nonsense talked about HDMI cables. For a start they shouldn't be sold as 1.2/1.3/1.4 etc compatible, the HDMI standard expressly forbids this. There are standard (cat 1 - < 75 MHz) and high speed cables (cat 2 - < 340 MHz) and both will work with the Apple TV.
Strictly speaking a cable should meet the HDMI standards before it can be sold and if it doesn't work you should ask for it to be replaced. Higher cost cables cost more because of quality, quality that is represented in quality control or tolerance, higher price cables will likely have a lower failure rate, but that doesn't mean cheap cables shouldn't work when you buy them.
Uniformity in diameter and in length are paramount. If one component is 1/3200 th of a mm longer than another the signal will become out of sync, variations in diameter can cause the signal to bounce back along the cable.
Personally, I'd never buy an expensive HDMI cable but I'd also avoid the ultra cheap ones, they should work out of the box, but throughout their life they will likely be pulled, bent, tripped over and run over with the vacuum cleaner, better cables are likely to have greater resistance to such treatment.

Similar Messages

  • How to fix a problem with my book pro that has a gray screen with a folder with a question mark on it

    does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?

    Hello Mokhtary123 and welcome to Apple Support Communities,
    It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
    But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
    A flashing question mark or globe appears when you start your Mac - Apple Support
    OS X Recovery
    http://support.apple.com/en-us/HT4718

  • WHEN or HOW to fix the problem with Thunderbolt/Side screen problems

    WHEN or HOW to fix the problem with Thunderbolt/Side screen problems (Cinema screen). Keeps blinking on & off then eventually completely off. Would have thought Apple would have fixed the problem by now as it is apparently to do with the Thunderbolt connector!.

    Hello, might it be Video card related?
    See if yours is on the recall list...
    iMac (27in): AMD Radeon 6970M Video Card Replacement Program (del 'mid 2011')
    http://xlr8yourmac.com/
    http://support.apple.com/kb/TS5167?

  • Problem with wireless keyboard and wireless mouse

    All of a sudden, after more than 6 mos., I am having problems with both the wireless keyboard and wireless mouse. I am getting a "connection lost" message on the screen with a picture of the keyboard. It only stays there a few seconds, disappears, then the keyboard is ok again.
    The mouse is even more frustrating. I am not using the ball for scrolling, just moving the mouse to move the pointer. It will be working perfectly, then for 15 to 30 seconds will either not respond, or be extremely slow, then be ok again. This has repeated a number of times today, especially when I am in iTunes. The batteries are fine in both devices, since I had the problem, changed the batteries, and still have these problems. Any ideas?

    Brian, I called Apple and I think they fixed the problem with the keyboard. Unfortunately, I did not write down the exact keystroke sequence they gave me, but let me tell you what I did. I unplugged the computer and waited 60 seconds. After I plugged in back in, I was told to immediately hold down 4 keys. I think they were something like Ctrl, Command, Shift, and R. Those may not be the exact keys, maybe it was Option instead of Ctrl, and maybe R is not right. I am not sure. Those keys are held down until the second beep is heard after the computer was turned on. Supposedly, this re-established connections between the computer and the keyboard. Sorry I did not write down the key combination. If you can, call Apple and get the proper key stroke combination

  • [K8N NEO3-F] Problem with USB keyboard and PS2 mouse after upgrading BIOS

    Hello everyone!
    I have upgraded BIOS from 1.1 to 1.4... I have Sempron 2600 (64bit) so BIOS v.1.1 did not recognise it.
    The motherboard works, but after upgrading I have a small problem with my keyboard and mouse.
    When I use USB keyboard my PS2 mouse doesn't work. When I connect PS2 keyboard mouse works!!!
    Can you tell me what's wrong?                   
    Thanks, bartull@           
    PS. Does BIOS v.1.3 recognise Sempron 64bit? Can you give me a link to it?

    I think that the problem may have been caused by flashing either with liveupdate or with winflash.  I had the problem when i used winflash correctly (shutting down all programs, checking all the boxes to clear bootblock and cmos) but had usb keyboard connected during flash.  My suggestion is to reflash with floppy to last bios version that worked using only ps2 mouse and keyboard with the following instructions:
    DOS floppy flash shall be performed with :
    awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
    (Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
    After flash is complete :
    TURN OFF PSU (don't restart) wait 15 seconds
    Turn on again , press the power button .
    Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
    Boot the system again with the floppy in the drive to let the DMI pool build and update itself .
    If that works, then reflash to the bios you tried before with the same procedure.  Once you have stable system with ps2 keyboard and mouse working, re-enter bios and enable usb and keyboard support as a lot of bios' have it disabled by default for some strange reason.
    Good luck.

  • How to fix a problem with the discharge rate of the battery in the iPhone

    Hi I have a question namely how to fix the problem of discharging the battery in the iPhone 4 with ios7.1

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.

  • How to fix underscan problem with footage

    I am trying to help a friend fix a problem with some footage he shot. A client was standing in front of a painted matte. The footage was shot,(and cannot be re-shot) and once back in the studio he found that a the edge of the matte that is not painted is showing up beyond the TV safe area. It can be seen on a computer screen and if shown thru a projector. The viewfinder of his camcorder did not show this problem.
    So how can we fix it? It is a narrow band of white on the left side of the screen. The problem is that part of some leaves cross over it and out of frame. We have tried just simply scaling it up to get beyond the white edge but the picture quality begins to degrade. We have to fix this using FCP since that is all that is available to us. The clip is fairly long so we probably won't have the time to fix it in Photoshop.
    Any help is greatly appreciated.
    He is using FCP4.5 on a dual processor G5.
    Thanks!
    Ymir

    The cropping would leave a black bar. Something I was thinking about doing has cropping involved. I thought about duplicating the clip and stacking it over the original clip. Then crop it as suggested and then scaling the clip underneath and apply a Gausian blur. This would eliminate the white edge. Problem is, I have a hard line where the cropping took place. If there was some way to just feather the left edge of the crop.
    My friend thinks some type of masking needs to take place where we could just re-color the white bar but as of yet we haven't discovered how to go about it.
    Thanks for the suggestion,
    Ymir

  • Problem with Bluetooth Keyboard and Lion?

    I've just purchased a 21" imac running os x lion 10.7.3 and although the mac sees the keyboard when I set up the Keyboard from system prefs, it says 'keyboard cannot be found even though the Bluetooth prefs says it's there'.
    Second, there's an on/off button on the right hand side which glows green for a second when it's pushed, and ditto if you push it again, so I don't know if the keyboard is on or off! Surely it should glow grren when ON and not when OFF or is there a problem with the keyboard itself?
    Bill

    Hello:
    I've just purchased a 21" imac running os x lion 10.7.3 and although the mac sees the keyboard when I set up the Keyboard from system prefs, it says 'keyboard cannot be found even though the Bluetooth prefs says it's there'.
    Is the KB working on the system or not?
    Second, there's an on/off button on the right hand side which glows green for a second when it's pushed, and ditto if you push it again, so I don't know if the keyboard is on or off! Surely it should glow grren when ON and not when OFF or is there a problem with the keyboard itself?
    That is the way it is designed.  When you turn the KB on, the light is on for a brief period of time.  It does not stay on.
    Barry

  • Can anyone tell me how to fix the problem with downloading music? Now with the new iOS5

    Ever since the new iOS5, and now 5.1, whenever I download music, and play it on my iPad2, the album cover will "flash" white between each song, whereas before the picture would hold steady for the duration of the album play! I have to admit I find this REALLY annoying! Even syncing with my MacBook doesn't fix the problem...any ideas?

    Hi Jane,
    First, regarding the virus issue, although I cannot promote any specific 3rd party software, there are plenty of FREE and very good anti-virus apps out there. You can Google 'free antivirus" and a good list will come up. You may want to look at a few reviews before you try. I don't know if you use Mac or Windows so you may have to do a little research on which is best for your computer platform. You can run the software and it will help clean off your system if there's a virus.
    Second, regarding your Elements sync to Revel, you may need to disable and then re-enable the Revel sync agent from within Elements, which you find in Preferences. In addition you may try signing out and then back into Revel via Elements.
    Let me know how that goes. If the disable/re-enable doesn't help, I'll get an Elements team member to see if they can help.
    Best of luck on the virus software!
    Glenyse

  • How to fix ASA problem with Error message id 713231, 713232 ?

    Dear all,
    It's been two day with this problem and it's not possible to stablish vpn with peer yet. ASA is reporting error with messages id: 713231 & 713232. Before this the vpn was working perfectly. I did a reload of the ASA, but the problem continues:
    713232    Group = x.x.158.254, IP = x.x.158.254, SA lock refCnt = 0, bitmask = 00000000, p1_decrypt_cb = 0, qm_decrypt_cb = 0, qm_hash_cb = 0, qm_spi_ok_cb = 0, qm_dh_cb = 1, qm_secret_key_cb = 0, qm_encrypt_cb = 0
    713231    Group = x.x.158.254, IP = x.x.158.254, Internal Error, ike_lock trying to unlock bit that is not locked for type SA_LOCK_P1_SA_CREATE
    ASA 5510 version 8.3 (1)
    Is there anybody who knows how to fix this?
    Thanks in advance.

    Firstly ASA version 8.3 isn't that stable. I would advice you to upgrade to 8.4(5).
    Did you do a search in google? This is wat I found:
    http://www.cisco.com/en/US/docs/security/asa/asa80/system/message/logmsgs.html#wp4776301
    Posted by WebUser Erik Boss from Cisco Support Community App

  • How to fix Frame problems with fonts

    When I try to "Save as book" to PDF, I get a font error that prevents the file opening for printing.
    When I view the file, I get:
    The "Myriad Pro Light" Font is not available.
      "MyriadPro-Regular" will be used in this session.
    The print error does not specify which font, but I assume it is the one mentioned in the first line above.
    The font is in the Windows font directory, but FM is not seeing it.  How do I fix this?
    Unstructered FM12, Win8.1, HP printers (no choice about that)

    I am hoping somebody here can say what bits of Acrobat FrameMaker 12 includes. I don't know, because I am using Tech Comm Suite, which includes full-on Acrobat.
    At the least, FrameMaker solo should include the PDF printer driver and Distiller. With these, Save as PDF from FrameMaker should work fine, and if you have the fonts you should be able to print and embed them in a PDF.
    In my experience, font issues for Adobe products happen this way:
    You have certain fonts installed. There is no problem with these.
    You set as default a printer that has its own resident fonts. Those fonts now become available.
    You use the printer resident fonts in your document, which is fine, until ...
    ... You change printers, perhaps to PDF printer, and now the printer-resident fonts you thought you had are no longer there.
    Note, some printers are set to substitute fonts. So, you might specify a certain font but your HP printer actually has a font substitution table that is swapping your chosen font for Times New Roman, or sommat. Watch out for that, too.
    So, double check you have the fonts you think you do; view them in Character Map, for example.
    Cheers,
    Sean

  • How to fix a problem with the order of strings in a JSON response for a CFHTTP request?

    Good morning, guys! (It's 10:50 a.m. in Brazil)
    First of all, I'm still new at CF and my questions may seem too much silly and my English's not the best, so, please be patient with me. hehe
    Well, I'm accessing a link via CFHTTP that gives me a JSON response. I'm not familiar with JSON yet, so I'm working it as a string and using string functions (Find,RemoveChars,Replace,etc), but it happens to me that I'm receiving a certain kind of order of the strings list from the JSON when I access it directly from the browser and other kind of order totally different when I access it from the CFHTTP.
    I only figured it out because I was working at home with my code and there everything went just fine as expected. Then I brought to my job to develop a little bit more as soon as I get a free time and here my code doesn't work anymore. When I took a look at the JSON by a CFOUTPUT, I realized the strings were in a different order.
    Does anyone know why is it happening?
    Link to the JSON: http://sigmine.dnpm.gov.br/ArcGIS/rest/services/extra/dados_dnpm/MapServer/0/query?text=83 0620/2012&geometry=&geometryType=esriGeometryEnvelope&inSR=&spatialRel=esriSpatialRelInter sects&where=&returnGeometry=true&outSR=&outFields=FID,Shape,PROCESSO,ID,NUMERO,ANO,AREA_HA ,FASE,ULT_EVENTO,NOME,SUBS,USO,UF&f=pjson
    Basic code simplified to find out that the order of strings were coming different when access by CFHTTP:
    <cfhttp url="#URLAbove#" method="get" result="DadosDoDNPM" charset="utf-8" timeout="10000" />
    <cfset DadosJSON = deserializeJSON(DadosDoDNPM.FileContent) />
    <cfif arrayLen(DadosJSON.features)>
        <cfset CodigoFonteJSON = ToString(serialize(DadosJSON.features)) />   
        <cfoutput> #CodigoFonteJSON# </cfoutput>
    </cfif>
    Is there a way to fix it and to make my code work everywhere?
    If it matters, I use Railo at home and at my job.
    Since now, I thank you.

    When you deserialize JSON data, ColdFusion converts it into native structures and arrays (roughly equivalent to JavaScript objects and arrays).  In ColdFusion, structures are unordered (that is, they don't maintain keys in any particular ordered sequence).
    This really shouldn't be a problem though, at least not if you just want to work with the data contained in the deserialized JSON structure.  So DadosJSON should be a native ColdFusion structure, and you can interact with it like any other structure in ColdFusion.  In fact, you should not have to re-serialize it at all unless you need to send it to an external application using JSON.
    Why are you reserializing the data?  And why use serialize() instead of serializeJSON()?
    -Carl V.

  • Mapping problem with Wireless Keyboard and Japanese iPhone

    Hi everyone:
    This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
    I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live.  While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer.   I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard.  (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
    However, to my frustration, I can't use the keyboard due to a mapping problem.  The Bluetooth connection is fine -- the iPhone can discover the keyboard.  However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc.  The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu).  I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case.  None of them work.  Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
    The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem.  He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while.  Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen.  "Ah, there's your problem," he said, and selected a new setting.  The problem was instantly fixed.
    To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem.  Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more.  Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did.  And I still can't use my keyboard!
    Any ideas or advice, anyone?  How did "Ken" fix my problem, and how can I repeat it?  Much, much appreciated, in advance.

    THAT'S IT.  Sir, you have solved my problem.  Thank you!!
    And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along.  But isn't that always the way in hindsight?
    Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above.  The "menu" it brings up is, apparently, a list of keyboards.  I take it that this list is the same as the list of the "virtual" keyboards on the iPhone?  I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
    When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen.  Highlighted and checked at the top is "English," just as if it had been selected all along.  But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY.  I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
    Thank you again!  You have made me and my wireless keyboard very happy.

  • Fixed a problem with OSX-Logic and a MOTU 828MkII

    I was having problems with my 828MkII using it with a new G5 and OS10.3.9. There were massive drop-outs.
    It was a new computer and everything was installed correctly and cleanly - there was no other hardware installed other than the MOTU, and no other software other than Logic 7 - everything was done properly and tested over and over, but the problem persisted.
    I still had my old G4 with an older OS9 version of Logic, and when I went back to try the MOTU with this set up, it worked flawlessly. This fact made me suspect that the core audio driver was the problem, so I tried all the tricks I've seen in forums - reset the MOTU - uninstalled and re-installed. Upgraded my firmware. Even tried OS10.4 with old drivers new drivers, and still nothing worked.
    Then out of desperation I tried a new firewire cable and everything worked fine.
    I went back and tried the set up on my OS9 machine a few times and the MOTU worked flawlessly under the Asio2 drivers. What I learned is that OSX and core audio must use firewire differently because the cable did not work with that set up.
    I couldn't believe it. It's like finding out that a guitar cable only works with a Les Paul or something wierd like that.
    I'm sure someone out there must know the technical difference and why this cable works fine under OS9 (Asio2) but not OSX (core audio).
    I'm posting this because if I had read such a post - I would have tried a new cable as the first thing - but I had myself convinced that it could not be the cable. I still don't believe it. ! Luckily it was the cheapest fix.
    Scott.

    Same thing happened here when I check all items to install at once.
    After the installation failure , L7,L8,Waveburner .. everything unexpectedly quit then I decided to replace the entire OS to cloned back up.
    I tried the installation again and xxxx happened again. This time, I installed only applications (overwritten) again and it fixed the problem.
    Then I installed only JamPack on FW and went smoothly.
    I called Apple Tech and now I am waiting for the new installer DVDs of Audio contents only by regular mail.
    Hey, do we have similar serial number?? Apple script got damaged or something? I have no idea.

  • Serious problem with xorg - keyboard and mouse locks all the time.

    In the last week I've notices serious problems with xorg.
    After some event, I am not sure which one, keyboard stops responding.
    Mouse cursor works, but I can't click on anything.
    I can't switch to text console.
    But I can kill xorg with CTRL+ALT+BACKSPACE.
    Have you noticed something similiar?
    I use xfce4, [testing] repository.

    Jacek Poplawski wrote:
    In the last week I've notices serious problems with xorg.
    After some event, I am not sure which one, keyboard stops responding.
    Mouse cursor works, but I can't click on anything.
    I can't switch to text console.
    But I can kill xorg with CTRL+ALT+BACKSPACE.
    Have you noticed something similiar?
    I use xfce4, [testing] repository.
    I had that a few days ago, couldn't reproduce it. I was also running xfce4. I havn't had it today and im running xfdesktop+xfce-mcs-manager+pekwm+xfce4-panel... so it may have been xfwm4.
    James

Maybe you are looking for

  • IMAC 8.1 IS IT COMPATABLE WITH MINI ADAPTOR TO HDMI CABLE TO TV?

    I have a imac 8.1 running 10.6.8, Im tryint to get the picture and sound to the Tv for viewing and screen sharing. I have the Mini DisplayPort to HDMI Adaptor to the HDMI Cable but cannot get it to work as when i go to system preferences, Display, I

  • My MacBook Pro does not recognize my iPhone 4 when I connect with USB

    As the subject line says, when I connect my iPhone 4 to my MacBook Pro via the USB cable, it normaaaally opens iTunes and iPhoto automatically and syncs and imports photos from the phone. But, for some reason, that doesn't happen anymore... Now when

  • Problem with Serial numbers after upgrade

    Hello, I updated an existing installation from BO2007 SP01 PL05 to BO2007 SP01 PL09 After the update in the form Serial Number Selection it's impossible to find any serial number, the cursor move to the right row but I get the message "Serial Number

  • OCS 2007 r2 new users are unable to sign in Help!!!

    a little background: we had an issue with our domain controller and had to flash a backup image that we took 2 weeks prior. after we got everything setup correctly again and added users that were not there when we took the image backup. it all seemed

  • Request for classic hp calculator emulators for WebOS

    Never were there better calculators made than the hp1x line.  My personal favorite was the hp11c, which I've owned for almost 30 years and which serves me well today.  Long discontinued by hp, they still regularly sell on ebay for over $200 (twice th