How to fix sound for FaceTime

The person on the other end cannot hear me, but I can hear them

Hello sandraeliz,
Thank you for contacting Apple Support Communities. You can use the following article to troubleshoot your microphone issues. It says it is for an iPhone, but it is applicable for the iPad also.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Regards,
Jeff D.

Similar Messages

  • How to fix sound on imac(desktop)?

    How to fix sound on imac(desktop)?

    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.

  • How to fix sound distortion on an iPod?

    I have a 4th generation iPod shuffle. When i use ear buds with it, the sound will be fine at first, but after a few days the sound will start to get distorted. If I mess with the ear buds for a little I can fix the sound for a few seconds. After a while the ear buds will stop working with the iPod all together. If I buy a new pair of ear buds the whole thing starts all over again. The ear buds work fine on my PC regardless of how well they work on my iPod and when I restore my iPod it's work fine for few minutes. Any suggestions?

    Per this previous discussion you can't.
    https://discussions.apple.com/message/12894082#12894082

  • How to mute sound for app?

    Is there a way to mute sound for one particular app? In windows, you can do this from the volume control. It list each app and you can control volume there. I don't see a way to do this in Windows.
    Particularly in gotomeeting, there isn't any mute available. Safari is the same way.

    Hijack Safai with Audio Hijack Pro
    <http://www.rogueamoeba.com/audiohijackpro/>
    and use the Mute button. You can get by with the free version for just muting.

  • Cannot fix sound for Headphones

    I am having multiple different problems with all headphones that I plug into my computer (non USB). On my macbook pro, system preferences will show it as an option for sound
    However, most of the time, the headphones at first will not play. The internal speakers will not play either. When I try to change the sound of the headphones, it will also give me this symbol instead of the symbol normally given when sound is changed.
    After 30 minutes to an hour, this problem is sorted out just by waiting, however, until then, sound doesn't work. This problem has been occurring for a couple of months. I have tried multiple different sets of headphones and the headphones work when plugged into my phone or any other computer. Any help would be greatly appreciated, thank you

    Try resetting the PRAM:
    Shut down your Mac.
    Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on your Mac.
    Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
    Release the keys.

  • How to enable sound for my center, rear and side speakers using CMSS feature from my soundcard?

    What is CMSS? and how to use it
    The following information are abstracted from our Knowledgebase on CMSS. Please check the case relevant to your sound card below. You can also access the article on directly from the URL below. Knowledgebase article
    How to enable CMSS in Creative MediaSource for Sound Blaster Audigy LS series
    Go Start, All Programs, Creative, Creative MediaSource, and click on the Creative MediaSource Player or the Creative MediaSource Organizer.
    Click on the EAX button to enable EAX. The button should now be highlighted in green.
    Next, click on the little buttons next to the EAX button, which will bring up the Creative EAX Console.
    In the EAX Console, check the CMSS 3D tab, then check the box next to Enable CMSS 3D.
    Select ether CMSS or Stereo Surround and close the EAX Console.
    You can also open the EAX Console by clicking Start, All Programs, Creative Audigy LS, EAX Console.
    How to turn CMSS on and off with the Sound Blaster Extigy?
    Using Remote Center: Press the CMSS button to toggle on and off. Ensure that speaker settings are set to 4., 5. or Auto.
    Using Play Center: In the Play Center mini-view, expand the right hand panel and click on CMSS. Choose On or Off. Ensure that speaker settings are at 4., 5. or Auto.
    Message Edited by Jason-CL on 04-2-2007 2:07 PM
    Admin notes: Updated the links - KokChoy
    Message Edited by KokChoy-CL on 06-27-2008 04:18 PM

    Sound Blaster X-Fi - Enabling Creative Multispeaker Surround (CMSS)
    The following information are abstracted from our Knowledgebase on CMSS. Please check the case relevant to your sound card below. You can also access the article on directly from the URL below.
    Knowledgebase article SID4788
    If you are listening to stereo content like MP3's or CD's and you would like the sound to be played over your surround sound speaker system, you can enable CMSS 3D on your X-Fi card. If you are playing computer games, the X-Fi's Virtual 3D via CMSS gives a highly realistic surround sound over headphones.
    It is important to remember that if you do wish to play a 5. encoded file like Dolby or DTS soundtracks, you will need to turn CMSS off. Otherwise you might not receive each discreet channel.
    Please select the mode: (More information about changing the Mode).
    Entertainment mode
    In Entertainment mode, select the 3D button.
    http://www.ask.asia.creative.com/wwimages/audio_int/xfi/xfi_cmss_entertainment.JPG
    http://www.ask.asia.creative.com/wwimages/audio_int/xfi/xfi_cmss_entertainment2.JPG
    http://www.ask.asia.creative.com/wwi...rtainment2.JPG
    Game mode
    Click the CMSS-3D tab on the left side of the Game Mode console.
    Tick the Enable CMSS-3DVirtual option .
    http://www.ask.asia.creative.com/wwimages/audio_int/xfi/xfi_gamemode_eq.jpg
    Note: CMSS is not supported in Music Creation mode.
    Message Edited by KokChoy-CL on 07-04-2008 04:28 PM

  • How to fix sound cracking in my notebook ?

    Product name and number:- HP Pavilion dm4-1162us
    OS:- Windows 7 64-bit
    Installed new audio drivers, but still facing sound cracking problem in my PC.

    I would check to see if you have a BIOS update available for install.  Then I would perform a hard reset and test it.  Try plugging headphones in and see if they made the cracking sound.  If not, it could simply be a hardware problem with the speakers or speaker wiring.
    To Perform A Hard Reset
    Shut down the computer by going to the Start menu and selecting shut down. (If you have no display, hold the power button down for  5 seconds); (if the computer doesn't power on, move to the next step)
    Disconnect the AC Adapter from the notebook.
    Remove the battery from the bottom of the notebook.  There will be a switch/button to eject the battery.
    Wait at least 1 minute with all power sources disconnected.
    Re-insert the battery and reconnect the AC Adapter and then attempt to power on the notebook.

  • How to fix enhancements for speakers and headphones IDT high definition audio CODEC

    I received a Windows message indicating "Windows has detected enhancements for the following are causing problems. Speakers & Headphones IDT High Definition Audeo CODEC.
    How can I correct this?
    fasteddie0717

    Did you install a third party CODEC?
    ****Please click on Accept As Solution if a suggestion solves your problem. That will help another person facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How to enable sound for a HP Pavilion Entertainment PC

    I disabled the sound function when I was in Manage Audio section of Hardware and Sound using Windows 7. I had been using speech software, in a public place, and I wanted to not annoy others. Since them I have no sound unless I use external speakers. I also can not use the audio or video on Skype. How can I re-enable the sound?

    You can press . on the number pad to just hear audio.
    Also, in your RAM preview options, you can set it to preview from current time rather than from the beginning of the work area. Read more about it on this page.

  • How to fix sizing for album artwork?

    So I made an album cover for a song that is not yet on iTunes and it's not the correct size. I've tried resizing it and everything and I just can't seem to fix it. It doesn't show up correctly on my iPod either so please help! Here's a picture of what I'm talking about, in the middle row there's a difference between the two covers.

    If the photo is not square, iTunes will leave extra space. 
    Before adding it to iTunes, use Picasa, PictureIt, or some other photo editor to crop it to a square shape.

  • HP 400-214 How do Audio sound for 1 : 5

    It worked well on a 2 yr old Dell desktop
    No luck figuring this out . Help Wanted.

    How to ask the very best question.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How to fix sound delay in adobe air apps?

    I am working on this drummer game where the user has to repeat what he listens by tapping on the thouchscreen, but there´s a noticeable delay on Android and iOS. The same game I had it working fine on AS2 for PCs. I don´t know whats the problem in adobe air apps. I hoe someone can help me.

    Unfortunately, I do not own an iOS device and from my understanding, you have to have a developer account just to be able to test apps on your device, even if you have no intention of ever publishing something on the store. Correct me if Im wrong on that, but everything I have seen is that the only way to test apps without a developer account is to have a jailbroken device.
    I have been building an audiobook player on and off for a while now and tested it on a Galaxy Nexus, Nexus 4, and Nexus 5 in addition to my Moto X. None of those ever experienced any noticeable delays in playback. That is why I was wondering if it is a per device issue. Or it could be that I have just always used vanilla (or extremely close to it) Google Android devices. I understand that the devices I have tested with are most likely in a very low percentage of active devices used aside from the Moto X. I was basically just wanting to jump in to provide my notes on the issue, the device I tested with, and my experience.

  • How to fix "Licensing for this product has stopped working - Error 150:30"?

    I cannot pen PSE or Bridge. It get the message "Licensing for this product has stopped working - Error 150:30".
    I assume it is because I recently upgraded my Mac to Yosemite.
    What do I need to do to be able to open PSE again?
    Thank you.

    Thank you. I appreciate your tips. I tried solution 5 and it doesn't work.
    The rest is essentially gibberish to a basic user like myself. I have
    neither the expertise nor the confidence to go into these folders and start
    mucking around in there. Can I please have someone call me and guide
    through the necessary steps. My number is 06 46 40 94 39 (Location: France).
    Cheers.
    Michel Payen-Dumont & Nancy Feyerer
    www.gaulejac.blogspot.com
    Tél.: 05 53 50 72 80
    M: 06 46 40 94 39
    N: 06 45 29 59 40

  • How to fix pdfmaker for excel on windows 8?

    My office upgraded our computers to windows 8.  My adobe acrobat works fine but the pdfmaker on the excel is not working. I looked on the troubleshoot on adobe and it recommended to check addin.  I checked it and it still will not add to excel.  I am not sure what I am doing wrong.  Any help would be great.  Thanks.

    Hello,
    What is the version of Acrobat and MS Office do you have?
    Make sure the the Acrobat is updated to its latest version. Go to Help -> Check for updates.
    If nothing works, then try repairing Acrobat via Help -> Repair Acrobat Installation.
    Regards,
    Anoop

  • How to fix Sound

    Volume control is up to max but still no sound...can someone help

    Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
    Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Maybe you are looking for

  • MVC - Performance of data binding

    Hi Gurus out there I have a concern regarding performance of (dynamic) data binding if I have a lot of <i>textEdit</i> fields containing huge amount of data on a view page. <u>Scenario</u>: The view page contains buttons <b>[Add textEdit field]</b> a

  • Lumia 920 - internet sharing doesn't work: Connect...

    Hello all, I'm experiencing a serious problem with the lumia 920. It seems impossible to share my internet connection. Something I normally use for several hours a day. If this problem can't be fixed soon, ill be forced to swithc back to iphone or ht

  • Kin : Dead. Sidekick : Dead. What is the next youth social networking mobile carrier?

    Probably Virgin Mobile. They are aggressively marketing unlimited text/data plans for the prepaid market. But they have two huge weaknesses. 1)No Bring Your Own Device. Something many if not all Verizon resellers allow. 2)They only have Sprint native

  • Work center capacity

    Hello experts I am truing to compare between actual Work center capacity (I am using data source 2LIS_04_P_ARBPL). And standard work center capacity (transaction cro3 in the R3) I canu2019t find an info cube or data source that will help we extract t

  • Java.io.NotSerializableException: java.util.Hashtable$KeySet

    Hi, i have a     private Hashtable<IDInterface, String> globalPeerFarmMap_=new Hashtable<IDInterface,String>();    in one class and it can be serialized OK. In another class, however i have a     private Hashtable<IDInterface, PeerBasic> thesePeers_=