How to fix the above mentioned, *"special Incoming Closed margins"*.
Valuation runs (TPM1) fails with the error below:
Unfixed bus. trans. with posting date 02/23/2012 before key date (long text)
Message no. TPM_TLV1028
Diagnosis
The position that is to be valued contains a position-relevant business transaction Close margin listed options and futures in status Scheduled with posting date 02/23/2012 This is earlier than the valuation key date.
Question is how to fix the above mentioned, "special Incoming Closed margins".
PLease note that TPM18 or TBB1 does not work....
Regards,
Rahul
Hello Lorenz,
I get no flows selected but report tpm13 clearly shows there is an OUTGOING CLOSED MARGIN update type in scheduled status ?
Any ideas. This issue has been reported before but no results.
Regards,
Rahul
Similar Messages
-
Power Efficiency Diagnostics Report - How to fix the below mentioned issues?
Power Efficiency Diagnostics Report
Computer Name
SONY-VAIO
Scan Time
2014-04-12T15:29:55Z
Scan Duration
60 seconds
System Manufacturer
Sony Corporation
System Product Name
VPCEH25EN
BIOS Date
04/19/2012
BIOS Version
R0200Z9
OS Build
7601
Platform Role
PlatformRoleMobile
Plugged In
false
Process Count
134
Thread Count
1477
Report GUID
{bd655715-c758-4329-9f37-029a6c41aa27}
Analysis Results
Errors
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name
USB Composite Device
Host Controller ID
PCI\VEN_8086&DEV_1C26
Host Controller Location
PCI bus 0, device 29, function 0
Device ID
USB\VID_12D1&PID_14DB
Port Path
1,1
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name
USB Mass Storage Device
Host Controller ID
PCI\VEN_8086&DEV_1C26
Host Controller Location
PCI bus 0, device 29, function 0
Device ID
USB\VID_0BB4&PID_0001
Port Path
1,3
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name
USB Root Hub
Host Controller ID
PCI\VEN_8086&DEV_1C26
Host Controller Location
PCI bus 0, device 29, function 0
Device ID
USB\VID_8086&PID_1C26
Port Path
USB Suspend:USB Device not Entering Suspend
The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use.
Device Name
Generic USB Hub
Host Controller ID
PCI\VEN_8086&DEV_1C26
Host Controller Location
PCI bus 0, device 29, function 0
Device ID
USB\VID_8087&PID_0024
Port Path
1
CPU Utilization:Processor utilization is high
The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute
the most to total processor utilization.
Average Utilization (%)
10.44
Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility with the hardware in this computer.
Warnings
Platform Timer Resolution:Platform Timer Resolution
The default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to
multimedia playback or graphical animations.
Current Timer Resolution (100ns units)
10000
Maximum Timer Period (100ns units)
156001
Platform Timer Resolution:Outstanding Timer Request
A program or service has requested a timer resolution smaller than the platform maximum timer resolution.
Requested Period
10000
Requesting Process ID
2768
Requesting Process Path
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\chrome.exe
Platform Timer Resolution:Outstanding Timer Request
A program or service has requested a timer resolution smaller than the platform maximum timer resolution.
Requested Period
10000
Requesting Process ID
7268
Requesting Process Path
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\chrome.exe
Power Policy:802.11 Radio Power Policy is Maximum Performance (Plugged In)
The current power policy for 802.11-compatible wireless network adapters is not configured to use low-power modes.
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Name
SRService.exe
PID
2632
Average Utilization (%)
1.61
Module
Average Module Utilization (%)
\SystemRoot\system32\ntoskrnl.exe
1.34
\Device\HarddiskVolume3\Windows\SysWOW64\kernel32.dll
0.04
\Device\HarddiskVolume3\Windows\System32\wow64.dll
0.04
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Name
chrome.exe
PID
1728
Average Utilization (%)
1.40
Module
Average Module Utilization (%)
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\34.0.1847.116\chrome_child.dll
1.21
\SystemRoot\system32\ntoskrnl.exe
0.10
\Device\HarddiskVolume3\Windows\SysWOW64\ntdll.dll
0.01
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Name
chrome.exe
PID
5264
Average Utilization (%)
0.87
Module
Average Module Utilization (%)
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\34.0.1847.116\chrome.dll
0.33
\SystemRoot\system32\ntoskrnl.exe
0.27
\Device\HarddiskVolume3\Windows\SysWOW64\ntdll.dll
0.04
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Name
chrome.exe
PID
7268
Average Utilization (%)
0.59
Module
Average Module Utilization (%)
\Device\HarddiskVolume3\Windows\SysWOW64\nvd3dum.dll
0.15
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\34.0.1847.116\libglesv2.dll
0.08
\SystemRoot\system32\ntoskrnl.exe
0.07
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Name
System
PID
4
Average Utilization (%)
0.55
Module
Average Module Utilization (%)
\SystemRoot\system32\ntoskrnl.exe
0.36
\SystemRoot\System32\drivers\dxgmms1.sys
0.06
\SystemRoot\system32\DRIVERS\nvlddmkm.sys
0.02
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Name
svchost.exe
PID
860
Average Utilization (%)
0.44
Module
Average Module Utilization (%)
\SystemRoot\system32\ntoskrnl.exe
0.28
\Device\HarddiskVolume3\Windows\System32\rpcrt4.dll
0.04
\Device\HarddiskVolume3\Windows\System32\ntdll.dll
0.03
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Name
AvastSvc.exe
PID
1316
Average Utilization (%)
0.38
Module
Average Module Utilization (%)
\SystemRoot\system32\ntoskrnl.exe
0.13
\Device\HarddiskVolume3\Program Files\Alwil Software\Avast5\defs\14041100\algo.dll
0.05
\Device\HarddiskVolume3\Windows\winsxs\x86_avast.vc110.crt_2036b14a11e83e4a_11.0.60610.1_none_1d37a43bbfe1dc9c\msvcr110.dll
0.03
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Name
chrome.exe
PID
6232
Average Utilization (%)
0.29
Module
Average Module Utilization (%)
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\34.0.1847.116\chrome_child.dll
0.21
0.04
\SystemRoot\system32\ntoskrnl.exe
0.01
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Name
Apoint.exe
PID
4420
Average Utilization (%)
0.28
Module
Average Module Utilization (%)
\SystemRoot\system32\ntoskrnl.exe
0.14
\SystemRoot\System32\win32k.sys
0.06
\SystemRoot\system32\drivers\fltmgr.sys
0.02
CPU Utilization:Individual process with significant processor utilization.
This process is responsible for a significant portion of the total processor utilization recorded during the trace.
Process Name
explorer.exe
PID
4056
Average Utilization (%)
0.21
Module
Average Module Utilization (%)
\SystemRoot\System32\win32k.sys
0.09
\SystemRoot\system32\ntoskrnl.exe
0.07
\Device\HarddiskVolume3\Windows\winsxs\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac\comctl32.dll
0.00
Information
Platform Timer Resolution:Timer Request Stack
The stack of modules responsible for the lowest platform timer setting in this process.
Requested Period
10000
Requesting Process ID
2768
Requesting Process Path
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\chrome.exe
Calling Module Stack
\Device\HarddiskVolume3\Windows\SysWOW64\ntdll.dll
\Device\HarddiskVolume3\Windows\SysWOW64\winmm.dll
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\34.0.1847.116\chrome_child.dll
\Device\HarddiskVolume3\Windows\SysWOW64\kernel32.dll
\Device\HarddiskVolume3\Windows\SysWOW64\ntdll.dll
Platform Timer Resolution:Timer Request Stack
The stack of modules responsible for the lowest platform timer setting in this process.
Requested Period
10000
Requesting Process ID
7268
Requesting Process Path
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\chrome.exe
Calling Module Stack
\Device\HarddiskVolume3\Windows\SysWOW64\ntdll.dll
\Device\HarddiskVolume3\Windows\SysWOW64\winmm.dll
\Device\HarddiskVolume3\Windows\SysWOW64\d3d9.dll
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\34.0.1847.116\libglesv2.dll
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\34.0.1847.116\libegl.dll
\Device\HarddiskVolume3\Users\sony\AppData\Local\Google\Chrome\Application\34.0.1847.116\chrome_child.dll
Power Policy:Active Power Plan
The current power plan in use
Plan Name
OEM Balanced
Plan GUID
{381b4222-f694-41f0-9685-ff5bb260df2e}
Power Policy:Power Plan Personality (On Battery)
The personality of the current power plan when the system is on battery power.
Personality
Balanced
Power Policy:Video Quality (On Battery)
Enables Windows Media Player to optimize for quality or power savings when playing video.
Quality Mode
Balance Video Quality and Power Savings
Power Policy:Power Plan Personality (Plugged In)
The personality of the current power plan when the system is plugged in.
Personality
Balanced
Power Policy:Video quality (Plugged In)
Enables Windows Media Player to optimize for quality or power savings when playing video.
Quality Mode
Optimize for Video Quality
System Availability Requests:Analysis Success
Analysis was successful. No energy efficiency problems were found. No information was returned.
Battery:Battery Information
Battery ID
5950SONY Corp. VGP-BPS26
Manufacturer
SONY Corp.
Serial Number
5950
Chemistry
LION
Long Term
1
Design Capacity
45040
Last Full Charge
34940
Platform Power Management Capabilities:Supported Sleep States
Sleep states allow the computer to enter low-power modes after a period of inactivity. The S3 sleep state is the default sleep state for Windows platforms. The S3 sleep state consumes only enough power to preserve memory contents and allow the computer
to resume working quickly. Very few platforms support the S1 or S2 Sleep states.
S1 Sleep Supported
false
S2 Sleep Supported
false
S3 Sleep Supported
true
S4 Sleep Supported
true
Platform Power Management Capabilities:Adaptive Display Brightness is supported.
This computer enables Windows to automatically control the brightness of the integrated display.
Platform Power Management Capabilities:Processor Power Management Capabilities
Effective processor power management enables the computer to automatically balance performance and energy consumption.
Group
0
Index
0
Idle (C) State Count
3
Performance (P) State Count
14
Throttle (T) State Count
8
Platform Power Management Capabilities:Processor Power Management Capabilities
Effective processor power management enables the computer to automatically balance performance and energy consumption.
Group
0
Index
1
Idle (C) State Count
3
Performance (P) State Count
14
Throttle (T) State Count
8
Platform Power Management Capabilities:Processor Power Management Capabilities
Effective processor power management enables the computer to automatically balance performance and energy consumption.
Group
0
Index
2
Idle (C) State Count
3
Performance (P) State Count
14
Throttle (T) State Count
8
Platform Power Management Capabilities:Processor Power Management Capabilities
Effective processor power management enables the computer to automatically balance performance and energy consumption.
Group
0
Index
3
Idle (C) State Count
3
Performance (P) State Count
14
Throttle (T) State Count
8Hi,
What is the symptom of the issue you encountered? The report shows there's a "known incompatibility with the hardware" and all "USB Suspend:USB Device not Entering Suspend" errors are caused by the prevention of Power Management (which is disabled due to
hardware issue) so have you made any hardware change rencently?
You can also manually check the Power Management setting, control panel\power options\chang plan settings\change advanced power settings, scroll down to PCI Express (check if you can set it to "Moderate Power Savings") and Process Power Management(should be
active).
Yolanda Zhu
TechNet Community Support -
After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.
IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost -
Does anypne know how to fix the missing MSCVR80.dll file? Ive reinstalled itunes several timessysystem restores. Ive tried everything I can think of . Been sitting here all day and nightHELP!!!!!!!!!!!!!!!!!!!
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
How to Fix the row in sap script, its urgent......
Hi Experts,
first i explain my sap script, i have print void check in my script client give readymade format means box are there, lines are there. i have to fix in box and line data form database table. everthing is working fine. i got all data. i have total 6 window in my script .but i have one issue In my sap script in header window total five rows... like below
Check voucher no:8888
check No: 1234
Date:1/28/2007
Bank:xyz
Batch no: 5678
now sometime check voucher is balnk....
Check voucher no: BLANK/NULL
check No: 1234
Date:1/28/2007
Bank:xyz
Batch no: 5678
because of that all rows are move up side and all window also move up side and so script not fix to the box and line all data are seen not perfectly... so guru`s how to fix the row and window in script....
its urgent...
Waiting for ur reply
Thanks & regards
JigarHi,
Follow the below steps . Definately your issue will bve resolved.
Let us suppose you are printing following fields
PH &v_text&
PH &v_text1&
PH &v_text2&
you will get the output as you expected.
and if you have any conditions for these fileds
/: if v_text is not initial.
PH &v_text&
/: endif
PH &v_text1&
PH &v_text2&
if you have data in each field then you will get output as expected .
But when v_text is initial.
the data will be moved up wnhich is happening in your case.
so what you need to do is?
/: if v_text is not initial.
PH &v_text&
/: else
PH (Here you need to mention empty line with same paragraph format
/: endif.
PH &v_text1&
PH &v_text2&
Reward points if useful
Regards,
Nageswar -
I like the mail feature with one exception; I cannot figure out how to change the font size of incoming mail permanently. And, when answering an email I have to highlight the first few words and zoom it so I can see what I am writing. what am I missing?
You can type the email using what you set in preferences and then highlight the text and use command - minus sign (or command - + for larger) to reduce the size of the text.
You can also type command - T and a window will appear allowing you to select fonts/sizes/color/ background highlight.
The above works in Notes also. I haven't tried to do this in any other Apple application.
For incoming emails, you can use the above to reduce font size, but I don't know of a way to permanently set the incoming font size to a default. -
How to Fix the 1st row in Table
How to Fix the 1st row in Table
In EP, one of the page we are getting out put in the table format. It's working fine, but as per the new requirement we have to fix (freeze) the first row of the table. (.i.e. whenever I click the page down button first row should be visible in the table). Can you help regarding the above issue?
For Example: in Table having 6 rows. In 1st row display Year Month and 2,3,4---etc Rows will display Quantity. Click on Page down Button in Table we are able to staring 2row. First was a movie up. So End user canu2019t find which year/moth under the Quantity is available.
So I have to fix in 1st row. Click on page down button table 1st row is fixed but comes to another Quantity Records.
It is Possible in Table? If possible please tell me.
Regards
Vijay KalluriHi KalluriVijay
I don't think there is direct availabe method available to fix the row. However, there are two ways using which you can achieve the requirement:
To go ahead with the custom table. This way you can set your own properties for the table. However, this may impact performance handling large data.
Second option is to use other features of NW04s (Not available in NW04) like Table Popins using which you can achieve something similar.
For Table Popins refer [TablePopin|http://help.sap.com/saphelp_nw70/helpdata/EN/23/5e9041d3c72e7be10000000a1550b0/frameset.htm]
Hope this helps.
Regards
Abhinav Sharma -
How to Fix ''The messaging interface has returned an unknown error. If the problem persists, restart Outlook.' Error, user has outlook 2007 connected to exchange 2010 server , I tried scan pst, configuring new profile but no luck so far. Please suggest !
Aditya MedirattaHi,
Please try the steps mentioned below and check if it helps:
Open Computer > Local Disk C > Program Files > Microsoft Office > Office 12 > Outlook.exe.
Right click on outlook.exe and click on Properties and then click on
Compatibility tab. Uncheck the box ‘run this program in compatibility mode for’ under compatibility mode, click on Apply and OK.
Note: If you are using 64 bit computer then the file location of the file will be
Computer>Local Disk C>Program Files (x86) >Microsoft Office>Office 12>Outlook.exe
Similar thread:
https://social.technet.microsoft.com/Forums/en-US/aa396c9e-0ce5-4de5-99e3-4f0d771b07e0/exchange-2007-messaging-interface-has-returned-an-unknown-error
Best Regards. -
How to Fix the iPhone 4S Wifi Problems After 8.2
How to Fix the iPhone 4S Wifi Problems After 8 2 its grayed out
I suggest you describe the problem in more detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received. Telling us you've tried ""all the methods mentioned in the forums" does not help.
-
I am unable to hear anything on my iphone 4 nor can the person i call hear anything when i speak -
I think that my ear piece and mike have both got magnetised how do fix the problem
Please helpI have the same problem!! It lead to many other problems with my phone
I just arranged a repair with apple. Yes its inconvenient to be without a phone for a while but if your phone is in warranty its good to get it looked at professionally! -
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
hello..
How i can delete the photos which are uploaded in ipad .
How to fix the sim card in the 3G iPad, where i can get the tool which to open the simcard slot.How i can delete the photos which are uploaded in ipad .
If they are photos you synced from iTunes, they are removed in the same manner... unsync them, i.e. deselct them from syncing.
How to fix the sim card in the 3G iPad, where i can get the tool which to open the simcard slot.
The tool should have come with the iPad... -
Within redbox I can not click on a movie and get information about it, instead I get an error message that says that the situation may be temporary. yet i keep having the same problem. Do you have any idea how to fix the problem?
Did you delete all receipts with iDVD in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder before installing the new copy? If not then do so and delete the new application also.
Click to view full size
Then install iPhoto from the disk it came on originally and apply all necessary updaters: Apple - Support - Downloads
OT -
I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itune
If they are iTunes purchased music then go to Settings>iTunes and App Store and turn off Show All.
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
How i fix the error 1015 for my iphone3g coz my phone i opining
how i fix the error 1015 for my iphone3g coz my phone i opining and also i can use since i face that problem
Yes, if it has been jailbroken, then there is probably nothing that you can do and you will never be able to use it, so ditch it and buy a new phone.
If it's an iPhone 3g, then it is a very old phone anyway and you shoud consider buying a new one.
Maybe you are looking for
-
Apex link not able to connect from local machine.
Hi, Here is the scenario. I have installed oracle apex 3.2 in my vmware linux machine. I'm able to connect the link (http://b03apex.domain.com) from my linux(vmware) box but I'm not able to connect from windows local machine. I tried to ping the ip,
-
Form display using ASR_PROCESS_EXECUTE
Hi all, I have a form and I want to display it using application ASR_PROCESS_EXECUTE of Standard program HRASR00_PROCESS_EXECUTE. Can anyone suggest me how I can do this requirement. Thanks Sanket sethi
-
Hi there. OutOfMemory(OOM) - why? I just read all available topics about OOM-Errors. But I'm afraid not having found a valuable answer. I wrote a prog that sends data over a socket. In order to avoid OOM, i send the file in blocks of 3MB. The recieve
-
HT1386 My iPad is not showing up in devices
My iPad is not showing up in the devices column on iTunes
-
Data load failed at infocube level
Dear Experts, I hve data loads from the ECC source system for datasource 2LIS_11_VAITM to 3 different datatargets in BI system. the data load is successful until PSA when comes to load to datatargets the load is successful to 2 datatargets and failed