How to fix the mouse and keyboard freezing when installing Windows 7 on 27' iMac late 2013?

Hi, I have a question for u guys who can solve this.
I recently bought the new 27' iMac late 2013, and I installed some softwares and used it for few days.
Before I bought this I used the 15' Macbook Pro Retina, I installed Windows 7 Home Premium 64 bit, and I used the Windows for gaming.
So back to my question.
So I bought the new iMac and I was tying to install Windows 7 Home Premium 64 bit (with the same CD).
After dividing the partition, and other stuff, the iMac rebooted and I hold down the option (alt) key. I choose the Windows CD, and it said it is "getting ready to install Windows". I let it load, and the blue screen where you choose the language, time/location and keyboard input popped up. At the bottom right corner (at the same page), there is a button that said "Next (N)" which u need to click it to go to the next step. I was moving my mouse to click the button, but I realized that my mouse and keyboard was frozen. I tried both wireless and wired mouse and keyboard but they didn't work. There was nothing I could do. I hold the power button, (that was the only option) and tried my mouse and keyboard on Mac OS and it worked fine.
I thought something went wrong in the CD so I bought the Windows 7 Ultimate 64 bit. The result was same. It frizzed again. (I just wast few hundred $)
Latter my friend lend me his Windows 8.1 Pro 64 bit. I tried it, and it worked, it didn't freezed on Windows 8.
The problem is I played Battlefield 4, Titan fall, and Watch Dogs, and Battlefield 4 multiplayer doesn't work on Windows 8.1. Even though when it works on Windows 8, I prefer using Windows 7.
Dose anyone knows how to fix this freezing thing?
My computer is:
27' iMac late 2013 (bought it just few days ago)
I did no upgrades when I bought it, except the graphic card.
I bought the iMac in Korean Apple Store, and my Windows CD is in Korean, can that be a problem?
Please leave a comment when u think u can solve my problem.

See -> http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf.
In addition to the Windows disc (or USB flash drive with the Windows installer) you'll need a 8GB+ flash drive.
The referenced manual - on page 3, I think, gives you a run-down of what you'll need before you begin the installation. You may also want to post any further Boot Camp questions in the Boot Camp forum -> https://discussions.apple.com/community/windows_software/boot_camp.
Good luck,
Clinton

Similar Messages

Mouse and keyboard freezing when first turn on computer

Everytime I fully shut off my computer and turning it back on, my mouse freezes when i press something on my keyboard. Even my keyboard stops working. This problem stops happening after i restart my computer, then my mouse and keyboard starts working. Because of this i keep my computer on all the time so i don't have to keep restarting everytime i start the computer. Is this a normal problem and is there a way to fix this? It tends to get really annoying.

Everytime I fully shut off my computer and turning it back on, my mouse freezes when i press something on my keyboard. Even my keyboard stops working. This problem stops happening after i restart my computer, then my mouse and keyboard starts working. Because of this i keep my computer on all the time so i don't have to keep restarting everytime i start the computer. Is this a normal problem and is there a way to fix this? It tends to get really annoying.

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help!

G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac

Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support.

P45-C51 mobo. Mouse and Keyboard freezes frequently. Please Help !!!

Hi everyone. I just bought P45-C51 mobo a week ago. It was working fine then since yesterday and then frequently today I'm facing a real problem. I'm using Windows 7 Ultimate 64bit. Whenever I start my computer and it reaches the desktop, after a couple of minutes the mouse and keyboard stops responding but the windows is not hanged as I can simply press the power button and it normally shuts down within 5 to 10 seconds. I checked it both with USB and PS2 version of the keyboard but both seems to freeze. I first thought it was something in windows but i think its something from the bios because when i turned my pc ON and went to the bios then there after 5 minutes the keyboard was frozen but the bios was normal as i could see the seconds change on the system information screen. Can anyone please point me in the right direction what could be the cause of this problem. All the specs are as follows.
Mobo: MSI P45-C51 (MS-7519)
Processor: Core 2 Quad Q8400
RAM: Corsair Vengeance 8gb kit 1600Mhz (4x2)
GPU: EVGA GeForce GT 240 DDR3 1GB
PSU: Cooler Master Extreme Power 460 Watt
Casing: Cooler Master Elite 334 Nvidia Edition
HD Primary: WD2500AAKX 250GB
HD Storage: WD10EARS 1TB
Bios Version: 5.7
Cooler: So far none. I'm on air cooling. One CPU fan and two chassis fans.
Temps for CPU are under 40 degrees.
Please help anyone...

Quote from: Bernhard on 21-September-11, 23:46:23
Inspect all your USB ports carefully for any visible damage inside the ports itself. Test if a USB device can be inserted smoothly into each one.
As a last resort, remove the MB and test on a non-conducting surface, and remember an anti static bag is not a non-conducting surface.
Have you started your system in safe mode to test the ports ?
Hi Bernhard, Sorry for the late response. This problem was something related to that board physically as I searched and dig inside the motherboard basics in deep I found out that the ICH10 Usb Host Controller was giving me problems or their might actually be some problem with the South Bridge because thats what controls the low power accessories like usb, IDE sata etc... and thats why the keyboard and mouse was hanging. There were some more issue too with that board like Slow boot and resuming from hibernate took about 3 minutes and when I press the power button for the cold power on it usually power on after 3 seconds and some times it happened if i properly shutdown and then again power on it won't turn on (LEDs and fans start but no power on to the system) So i would have to switch off the power supply, disconnect the power cord and then wait 5 minutes and then reconnect and it turn on then.
What i did was go to the shop from where I bought the mobo and told him all the problems and replaced my board with a new one because it was in warranty and bought only eleven days before.
Thanks alot Bernhard for so much your time you spent on helping me on this issue. The new board seems to work great and I can see very significant different in performance and speed.
Two last queries I have if you can help me out. Can you tell me If i can use Cooler Master Hyper n520 Cooler on this board. I have CM Elite 334 Nvidia Edition Casing. And second thing is that the bios of this board 5.1 and the latest is 5.7. Should I care updating the bios version? If yes then do you suggest any hints on how to do this ?
I really appreciate your help you have done so far.

Where are the mouse and keyboard settings stored

I reinstalled the OS, and cleared the PRAM and NVRAM. The Mac still recognises the Apple bluetooth mouse and keyboard. How do I reset them?
thanks

Hi alienvoord-
Some of the settings are stored in NVRAM.
Have you tried pulling the batteries out of the mouse and keyboard for a few minutes and see if that does it?
Are you trying to un-pair devices? Why not just delete them in the BlueTooth preferences?
Luck-
-DaddyPaycheck

Why is my mouse and keyboard freezing up?

Imac G5 with OSX 10.5.8, and imac G5.2 with 10.6.8
The same problem after transfering my folders from the G5 to the G5.2
I have to keep unpluging the keyboard and pluging it back in again, to free the mouse or keyboard.
I've changed both the mouse and keyboards.
I've done the both the SMC and PRAM resets, permissions fix, and virus searches.
No results.
This is a long discussed problem, has anybody found a fix?
Please lemme know.
Thanks

Pedestrian1980,
Hate to say it but you are either posting on the wrong forum or don't know which Mac you own. This is a Intel based iMac forum, as all G5 iMacs were PPC based that would indicated you are on the wrong forum. If you have an Intel based iMac (click About this Mac and check for the microprocessor) then you are on the correct forum.
You did not indicated if the keyboard or mouse are wired or wireless and if they are Apple or not. However, after determining if you have an Intel based iMac then redo the SMC and PRAM resets at least 3X each back to back and then retest. To be sure you are doing each reset correctly please click
https://discussions.apple.com/docs/DOC-3603
for directions.

TS3048 I can't log in the mouse and keyboard are not paired to computer

I can't log in to my computer because both the mouse and keyboard lights are blinking

Hello:
Try resetting the SMC (no peripherals needed).
Barry

Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro

Hi Everyone,
Can I force the bootcamp wizard to skip looking for the bootcamp drivers? I have already downloaded the latest drivers and loaded them on a FAT usb drive. All I want is for bootcamp to create the partition and allow me to install windows 8 pro.
The bootcamp drivers have been downloaded from apple's website. Filename: BootCamp5.0.5033
I have a iMac 27" late 2013 model.
NOTE: I have downloaded the drivers manually from apples support site as the bootcamp wizard fails third of the way through the download.
Appreciate any assistance.
Regards,
asdutoit

There is a missing point in this thread, and it is that the Boot Camp drivers for the Late 2013 iMac can only be downloaded from Boot Camp Assistant. The Boot Camp drivers available in the Apple site are not compatible with that iMac.
Delete the Boot Camp drivers from the USB drive, open Boot Camp Assistant and try to download the Boot Camp drivers again. If you get a message telling you that they could not be downloaded, I would try reinstalling OS X through OS X Recovery, by holding down Command and R keys while your Mac is starting up

Why does my mouse and keyboard freeze periodically?

I have a Macbook Pro that I bought at the end of last July. It's been working perfectly until just recently.
For whatever reason, periodically the screen will freeze. I can't move the mouse, and I can't type anything on the screen. It typically unfreezes anywhere between 15-45 seconds later. Things like movies or songs playing don't freeze when this happens, only the keyboard and mouse. Once it unfreezes, it's perfectly fine.
Is there any reason it would be doing this?

I just got my first bluetooth mouse and I've had problems with it disconnecting multiple times per day! I don't understand why! I have a mid-2012 13" MacBook Pro with OS X 10.8.2. I was using a Logitech wireless usb mouse but it would disconnect when teh computer went to sleep and I had to unplug the nano receiver and plug it back in every time for it to work again. So I decided to get a bluetooth mouse to see if I would have better luck with it. Well this is disconnecting a lot! It's so annoying! My new mouse is a gigabyte M7700B notebook bluetooth wireless mouse. There is no software from gigabyte to use with this mouse. It's paired properly.
What can I do to remedy this situation? The only problems I can find online for a bluetooth mouse disconnecting is with the Apple bluetooth mouse. I don't have that so it isn't helping me.
Is this just a problem with the bluetooth in Mac's?? It's been a problem for years as far as I can tell. My mac is relatively new. Help!

Mouse and keyboard freeze under Win 7 Pro Bootcamp on 10.9.1

People,
This is an interesting (if frustrating) issue. I have previously had Windows 7 Pro running wonderfully under ML 10.8.x and I removed the partition when I had no further use for it. Last night I decided to re-install. I am using the wired Apple keyboard and a wired USB Microsoft mouse. I used Bootcamp Assistant as before to create a USB installation while downloading the latest Bootcamp software from Apple.
Windows 7 Pro installs fine, and then reboots. The first time I get to the low resolution Windows desktop everything is also OK. I then install the Bootcamp drivers, allow the installation to complete and reboot.
At this point Windows boots to desktop in appropriate iMac resolution...except the keyboard and mouse do not function. It may well be a USB port issue, as swapping another keyboard and mouse a) doesn't help or b) make the distinctive 'USB device connected' sound.
I may download an older version of the bootcamp drivers and try again.
Anyone have any thoughts?
Regards,
Steve
PS: I'm using the followig hardware
27" iMac - 3.4Ghz i7 - Late 2012
32GB RAM
1TB Fusion
2GB GTX 680MX

I was able to dowload the support software and paste it over the old support software in the USB Winstall that Bootcamp created before, however the same issue is persisting after I get to the screen to set up windows. I get no response from the mouse and the keyboard. Any suggestions?
I'm using a iMac 27in (2013), a wired apple keyboard, and a Logitech wireless mouse.

Captivate 4 - Use the mouse and keyboard at the same time.

Hello, good people.
There is a way, in C4, to use the mouse and the keyboard at the same time?
An example, in software simulation:
"Hold the Shift key and click with the mouse in the other object to select it too..."

Hi all
I also understand the need for such a feature. Not saying I need it myself, but that I do understand it.
What really needs to happen here is for everyone else that would need to use such a feature to request it from the Adobe Captivate Development team. See, the thing is, it's like a big election system. The more folks that request a specific feature, the higher it ranks on the Adobe development radar.
So anyone that wants to see this feature should request it using the link below.
Click here to visit the Wish Form/Bug Reporting Form
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

My Mac was accidentally unplugged from the back of the computer when I restarted it the mouse and keyboard lost all connection and I cannot bring it back what to do?

iMac was accidentally unplugged and I lost connection to the mouse and the keyboard and it will not reconnect. Need help.

Get any usb mouse connected and open the Bluetooth pane in system preferences to re pair your Bluetooth keyboard and mouse.
You may also need a usb keyboard if your system is password protected.

Msi p67a-gd65 mouse and keyboard freeze - blinking caps lock.

As the title says, my mouse and keyboard suddenly froze while I was chatting on Skype and I noticed that my system was still running. In fact, my razer mouse light was also blinking. The caps lock had a sort of sequential blink, although I'm not sure.
Anyway, I had to use the power button to shut down the system and everything seems normal again. Does anyone know what would cause this? Is it a software issue or due to my board?
I'm running 64-bit Windows 7 Ultimate.

p67a-gd65 motherboard
Intel i7 2600K
2x MSI 6970 graphic cards
Seasonic SS-850HT 850W PSU
G.SKILL Ripjaws X Series 8GB (2 x 4GB)
ADATA S599 system hard drive
ADESSO keyboard and Razer Deathadder mouse
This was the first time this sort of thing has happened. I did have to replace (RMA) my PSU once before due to a random shut down issue but that was resolved. I'm really curious as to why this would happen and I'm hoping it's a software issue and not something related to the USB ports on the board.

Mouse and keyboard freezing

My computer has been running a bit slower lately, and I frequently lose mouse and keyboard control. Mostly happens after closing my laptop, and opening it again later. It will happen sometimes after disconnecting an audio interface while running Mainstage, or Logic Pro.
I run Adobe AE and Illustrator, and Logic Pro often. At first I was only having issues only when running two or more, but now it happens even when not using them.
I restart my computer about once a day because of these issues. Processes will continue normally, but I lose complete control.
I also am having problems with some of my adobe softwares, because of upgrading to Mavericks. I am thinking that I need to do a fresh install, and copy and past all of my documents, and picture files over, and reinstall all of my software. Thoughts?
System Specs
Hard disk 750 GB

My computer has been running a bit slower lately, and I frequently lose mouse and keyboard control. Mostly happens after closing my laptop, and opening it again later. It will happen sometimes after disconnecting an audio interface while running Mainstage, or Logic Pro.
I run Adobe AE and Illustrator, and Logic Pro often. At first I was only having issues only when running two or more, but now it happens even when not using them.
I restart my computer about once a day because of these issues. Processes will continue normally, but I lose complete control.
I also am having problems with some of my adobe softwares, because of upgrading to Mavericks. I am thinking that I need to do a fresh install, and copy and past all of my documents, and picture files over, and reinstall all of my software. Thoughts?
System Specs
Hard disk 750 GB

How to print the files and folders in a finder window?

A long time ago...There used to be a way to print all the files and folders in a finder window. I haven't been able to do so in a very long time. Is it one of those things no one else needed so they eliminated it? If not, can someone tell me how to do it?

Or use the scripts here:
/Library/Scripts/Printing\ Scripts
build the droplet in AppleScript Editor, and drag the folder on to the droplet.
This thread has other suggestions:
http://discussions.apple.com/thread.jspa?messageID=10825106&#10825106

How to fix the mouse and keyboard freezing when installing Windows 7 on 27' iMac late 2013?

Similar Messages

Maybe you are looking for