How to fix the security setting?

Hi there,
I wish to convert file from Microsoft Word to Adobe Reader. However, I do not know how to put in a security. What should I do in order to prevent someone copying the content, printing or leave comments? Can you please show me the steps?
I can't find any information about this issue so far on the Internet.
Thanks.

> I can't find any information about this issue so far on the Internet.
In the help of Adobe Acrobat read all about security.

Similar Messages

  • How to fix the security code invaild

    how to fix the security code invaild i keep writing the security code but it keeps telling me that it wrong what should i do?

    please im talking about my credit card i was buying and every thing was ok till 6 days ago it says that my billing info was wrong or aomething like that and it says i have to update it i clicked billing info it says that the security code of my card is invaild and im so sure it vaild please help me and teach me what to do (please step by step)

  • How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

    I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
    There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
    I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
    Thank you in advance guys.

    You probably should look at a more 'serious' audio interface rather than the Realtek
    Yes ASIO drivers are the way to go
    If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
    There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

  • I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fualt lies at my end or at the other end

    I have two companies sending me indesign documents. One opens up and the dictionary is set to English. The other file opens at is in Hebrew, Not sure how to fix the Hebrew part and whether or not the fault lies at my end or at the other end

    If only the language is Hebrew, you should correct it in the Paragraph and Character Styles.
    But in such a case I would expect more problems.
    If you are a creative cloud subscriber you should additionally install the InDesign version, English with Hebrew support:
    Go to the preferences of you CC.app. It is found behind the Gear Symbols on the top right.
    When the preferences open, go to the Apps section.
    Change the App Language to English with Hebrew support.
    Now you can install it. It will install on the very same place where your InDesign program is found some additional plugins, which will give you access to Hebrew functionality, like RTL text. Otherwise you will inherit in the document (and where you copy and paste it from such a document into another one). But now you can change or repair problems.
    Now repeatstep 1 + 2, but you need not to install your own language again. InDesign will now, when started, run in the language of your OS (when you have it installed in that language) but with more functionality to handle problems with Hebrew documents.
    The same steps you would have to do with Arabic or Asian documents. These languages will also add more plugins. But keep it limitted to those language you need. I have installed it that way, because I get sometime documen where the text flows the wrong direction or the numbers come up in Farsi digit, not in Arabic digits. For such purposes I need versions in languages I don’t understand myself.

  • How to Fix the 1st row in Table

    How to Fix the 1st row in Table
                 In EP, one of the page we are getting out put in the table format. It's working fine, but as per the new requirement we have to fix (freeze) the first row of the table. (.i.e. whenever I click the page down button first row should be visible in the table). Can you help regarding the above issue?
    For Example: in Table having 6 rows. In 1st row display Year Month and 2,3,4---etc Rows will display Quantity. Click on Page down Button in Table we are able to staring 2row. First was a movie up. So End user canu2019t find which year/moth under the Quantity is available.
    So I have to fix in 1st row. Click on page down button table 1st row is fixed but comes to another Quantity Records.
    It is Possible in Table?  If possible please tell me.
    Regards
    Vijay Kalluri

    Hi KalluriVijay 
    I don't think there is direct availabe method available to fix the row. However, there are two ways using which you can achieve the requirement:
    To go ahead with the custom table. This way you can set your own properties for the table. However, this may impact performance handling large data.
    Second option is to use other features of NW04s (Not available in NW04) like Table Popins using which you can achieve something similar.
    For Table Popins refer [TablePopin|http://help.sap.com/saphelp_nw70/helpdata/EN/23/5e9041d3c72e7be10000000a1550b0/frameset.htm]
    Hope this helps.
    Regards
    Abhinav Sharma

  • TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • What will happen if clicked on the generate key in the security setting of SLD in SAP B1

    Hi
    I clicked on the  generate dynamic key in the security setting of SLD in SAP B1, now when i am trying to open companies , it is asking for update , how can i  reset it to previous step.

    Hi Isaac Kalii,
    Can you please tell me the database names that i need to restore or i need to restore all the databases.
    Thanks

  • How to fix the Timing issue in Discoverer reports

    Hi,
    While running the discoverer report in Discoverer plus is taking more than 1 hour to complete( Gen.time + Extract to excel)
    where as the same report completes quickly in discoverer desktop.
    how to fix the timing issue in discoverer plus 
    Thanks
    Srinivas

    Timo Hahn wrote:
    There is a problem with autoHeightRows and columnStretching used together in 11gR1.
    Have you tried without columnStretching?
    Or have you tried if it works in 11gr2?
    TimoHi Timo, Thank you very much for taking time to respond to my question.. :)
    Back to my question...
    I tried removing the columnStretching although my requirement really requires this but no effect really happens even if I remove this.
    Based on my investigation on the generated HTML, I notice the following items:
    1. A table is being wrapped in a div that is being set at a fixed height.
    2. On first load, if your autoheight rows is set to 6, the framework is setting a height of 96px to the div. This height would almost cut the last row of the table.
    3. If you try to refresh the page or try to re-PPR the component, the framework resets it to 102px which causes the last row to be fully displayed.
    My only concern is that IE is perfectly displaying this while Chrome and FF are having problem.
    Based on my understanding, the framework is messing up the height only on first load. Not sure but this is how I see it. I am really not confident also on my findings
    and I would most likely hear other's comment.
    Thanks.

  • HT5312 HOW TO KNOW THE SECURITY QUESTIONS ABOUT APPLE ID?

    HOW TO KNOW THE SECURITY QUESTIONS ABOUT APPLE ID?HOW TO KNOW THE SECURITY QUESTIONS ABOUT APPLE ID?

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then steps 1 to 5 on the page that you posted from should let you reset them : go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account, then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use
    For future info typing all in capitals is considered shouting and makes posts difficult to read, and may mean that people don't reply

  • How to fix the co-ordinates ?

    i have an main vi, when i call the subvi user should not drag out of main window...? 
    how to fix the subvi coordinates....? because my subvi should be accommodate with in the main vi window?....
    Regards,
    Balaji DP

    i have an main vi, its maximize with the size of monitor. when i call the sub vi it will open on the main vi.. and the subvi windows property sets as floating,
    my question is,
                               lets consider the microsoft VC++ IDE there you can find there if you create a form, you cannot move out of the main window... like this i need, also i want to show the like property window and its also should not move.
    Regards,
    Balaji DP

  • Anybody know how to fix the audio while watching movies on first generation apple tv?

    Anybody know how to fix the audio while watching movies on first generation apple tv? On my apple tv, I can hear audio for music, music videos, youtube, internet radio and even movie previews! But..... when I pay for the rental download of a movie there is no audio - just visuals. I am connecting with hdmi. When I connect an apple tv 2nd generation to the same amp and tv, using same hdmi and even same power lead and same settings then there is no problem! Anybody know how I can get audio to work for movies for this?

    that makes sense and good point but no don't think so. Where would I check that setting? I had same problem on my next gerneration apple tv (black model) but when I switched off the dolby then I could hear movie. In this case that does not work for the first generation (white) apple TV I have whether dolby is on or off. I have never been able to watch a movie using it.

  • How to fix your security questions

    How to fix your security questions

    Hi Yungcowgirl,
    Welcome to the Support Communities!
    The article below should help you with this:
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    I hope this information helps ....
    Have a great day!
    - Judy

  • How to fix the BitRate & FrameRate

    hi all.
    I met a problem, how to fix the BitRate and FrameRate when sent by transmitter to the network using RTP protocol, and received by receiver at the same BitRate and FrameRate? Is there a mechanism in JMF to update the BitRate and FrameRate using the RTCP protocol?
    thanks.

    hi all.
    after creating the processor for the input datasource from a camera, i use following codes to set the framerate for the processor:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    FrameRateControl fr=(FrameRateControl)processor.getControl("javax.media.control.FrameRateControl");
    BitRateControl br=(BitRateControl) processor.getControl("javax.media.control.BitRateControl");
    br.setBitRate(1000000);
    System.out.println("frame rate= "+fr.setFrameRate(30)+"fps");
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    the output is:
    ~~~~~~~~~~~~~~~~~
    frame rate= -1.0fps
    ~~~~~~~~~~~~~~~~~
    according to the API documents of JMF2.1.1e, this output means "Returns -1 if it is unknown or it is not controllable".
    what should do to set the framerate for the processor? many thanks.

  • How to fix the position of different component?

    Hay all,
    Can anybody tell how to fix the position of any component so that they cant be moved from there initial positiion
    Regards,
    Sharad Agarwal

    Set layout to null and set bounds of the component to whatever you like.

  • How to fix the first field or column in classical report while scrolling

    i want to know, how to fix the first field or column in classical report while scrolling
    horizontally. the first  should be constant when i scroll the report horizontally .
    please help me.
    it's urgent.

    Hi,
    Suppose your first field is itab-matnr.
    WRITE :/ itab-matnr.
    SET LEFT SCROLL-BOUNDARY.
    WRITE :/......."Remianing fields

Maybe you are looking for