How to fix the troubleshoot issue code 205?

Hello i have just bought Adobe Flash Cs6 and i try downloading creative cloud but everytime i download it i get a troubleshoot error code #205 if anybody could help on how to fix this then i would be most grateful, thank you.

Creative Cloud Help / Error downloading Creative Cloud applications
http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

Similar Messages

How to fix the Timing issue in Discoverer reports

Hi,
While running the discoverer report in Discoverer plus is taking more than 1 hour to complete( Gen.time + Extract to excel)
where as the same report completes quickly in discoverer desktop.
how to fix the timing issue in discoverer plus
Thanks
Srinivas

Timo Hahn wrote:
There is a problem with autoHeightRows and columnStretching used together in 11gR1.
Have you tried without columnStretching?
Or have you tried if it works in 11gr2?
TimoHi Timo, Thank you very much for taking time to respond to my question.. :)
Back to my question...
I tried removing the columnStretching although my requirement really requires this but no effect really happens even if I remove this.
Based on my investigation on the generated HTML, I notice the following items:
1. A table is being wrapped in a div that is being set at a fixed height.
2. On first load, if your autoheight rows is set to 6, the framework is setting a height of 96px to the div. This height would almost cut the last row of the table.
3. If you try to refresh the page or try to re-PPR the component, the framework resets it to 102px which causes the last row to be fully displayed.
My only concern is that IE is perfectly displaying this while Chrome and FF are having problem.
Based on my understanding, the framework is messing up the height only on first load. Not sure but this is how I see it. I am really not confident also on my findings
and I would most likely hear other's comment.
Thanks.

On (release) action problem - how to fix the loading issue?

Hi,
I'm making a progress with the website in Flash. I have pretty much things already done. Motion tweens that change alpha in percentage ammount are working correctly - I've used them for loading pages but I encountered a one tiny problem...
Describing the website: there are buttons that - when you click - play an animation (motion tween with alpha changing) to load a proper page that is pinned with a particular button. So: home button loads the home page, bio button loads the bio page etc. All pages go with the motion tween - they fade in the website (from alpha 0% to 100%). Everything is fine and the website with everything works just perfect! But: there's one thing that doesn't keep me calm. When I open my website in a browser to test it and I click on each button to load pages - everything is ok, but when I want to click the same button few times - other things are being loaded by clicking the same button.
For instance: I click the "bio" button once and it loads my biography page with the motion tween as I described before. But when I want to click it secondly or thirdly it doesn't load my biography page anymore but a page before that one (in this case: home page). When I click it again the button loads my bio page again. So - in sum - it doesn't load the same page all the time, but randomly: the proper one or the one before (in the timeline).
My AC code for each button is simple, for example:
on (release) {
gotoAndPlay(173);
Also I've got the "actions" layer that carries stop(); command in places that are for it.
I tried with _root.gotoAndPlay and also with frame_number +1 and always the same problem.
I hope it isn't anything serrious and can be fixed.
I'll be very grateful for help.
Greets!
J.J.

As I explained in my post: I test my website in the browser (firefox), I click on a particular button which loads a particular section. It works with all buttons but sometimes when I click the button an incorrect section appears.
For example: I click biography button, and the biography section appears. Then I click contact button and contact section appears. Then when I want to see biography section again and click on the biography button, the biography section doesn't appear but the other section appears, for instance: home section, about section, gallery section or other from what I have.
Concluding from the entire description I've placed above in the topic I don't know why this thing happens and I need some help how to fix this issue of loading sections firstly correct and then, after some clicking - incorrect.
I hope I really presented it clearly.

How I fix the erasing issue?

When I apply a stroke down while Inking, I have a issue when trying to correct when erasing. I wanted to just erase the small issue, but most of the time it erases and recorrects the path making it "Squiggley". Is there a better way of correcting this so that my line will not change everytime i try to erase? It's annoying.

Don’t use the Eraser tool on stroked objects. The stroke will follow the edge of the erased area.
Instead use clipping masks.
The easiest way to make such a mask is to draw a filled rectagle over the artwork, lower its opacity to make it transparent, work on it with the Eraser and then use the resulting shape as a clipping mask. This way both fills and strokes will be masked as you want.

How to fix the updating issue if I am not an administrator on the computer I need to reinstall itunes on?

I think the title basically says it. I can't really reboot in safe mode as an administrator because I'm not one. I'm trying to reinstall itunes on my work computer (which is the computer I use to link my iphone etc) - I don't have access to the IT people until tomorrow afternoon at the earliest. Is there a way to reinstall itunes without running as an administrator?

Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
Remove license on a computer http://forums.adobe.com/thread/1442423?tstart=0 may help
-http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

How Can I Fix The Graphics Issue...?

After having my computer for a few years, it started getting an artifact around the mouse, and when it did that, everything was frozen, key commands didn't work, and I would have to manually shut it down.
I went to the Apple store, and they couldn't get it to boot, even with their external drive. The guy at the Apple store took my computer into the back, and a few minutes later, brought it out. He said he had gotten it to boot, without their external drive, but wouldn't tell me how. He said there was a problem with my video card. He said $400 to fix it.
Not having the money, I left. A friend told me how to safe boot the computer, and now it will turn on, despite the artifacts and graphics problems. Why didn't the guy at the store tell me this? It's obviously the only way he could have booted it. He wanted to charge me $50 to back up my data, when I could do it myself under the safe boot.
The thing is, when using safe boot, I have no audio or video functionality- the camera doesn't work, the speakers don't work, and the disc drive doesn't work. I've read up on this, and it's an issue for a lot of macs, from about the time I bought mine. They say there was too much glue used somewhere in the computer (2 or 3 little chips with too much glue or something), and over time the glue/ adhesive gets too hot, and spreads to other areas and ruins them (ie. my graphics card). That's my simplified understanding of the issue, anyway.
Why won't Apple replace it for me? They won't let me trade it in, because it won't boot right, but this is an issue they were aware of at some point. I spent a lot of money on this laptop and it's really nothing more than a digital typewriter now.
Does anyone know how I can fix the graphics issue? Aside from shelling out the money I don't have for something that's really Apple's fault? It'd be really nice to be able to, I don't know, watch things and listen to things. That was the whole reason I got this thing.
Thanks for any ideas, feedback, sympathy, empathy or other comments.
<Edited by Moderator>

Ok, you are right, maybe I don't know it for a fact . . . but from all the things I read in various forums, there was a batch (or something similar) of macs (the exact kind I have) that did have too much glue on some parts, and it caused all sorts of problems for different people, most of those problems being with the graphics card. Apparently the excess glue overheats and leaks out of where it's supposed to stay, and whatever it has the misfortune of getting on goes to pot.
I got very brave, thinking my computer was shot- I opened it, and there was, indeed, crusty glue coming out from under some ... things ... three square chip like things ... and it had seeped onto the edges my graphics card. Having seen the inside of other laptops, I know it was not supposed to look like that no matter how old it is.
This whole issue happened just a few months after my (overpriced, unused) AppleCare expired. Irony?
I did backup all my data and files (no thanks to the Apple people; and on safe boot the disc drive won't work, so I had to borrow my friend's external hard drive for backing up), and did a clean install with the original discs. It was a huge hassle, and when it was finally done, I booted my computer normally. It worked for about 10 minutes before it got artifacts all over and froze, at which point I had to force shut it down. I've tried the clean reinstall a few times, but the problem (I think) is that the glue inside already did the damage, and my graphics card is shot. So, I've been running it on safe boot for months. No music. No video. No disc drive. OH- and the best part- on safe boot, the airport won't work. I can't use wi-fi, and I can't take my laptop anywhere because I'm tethered to a modem. It's the worst thing ever. All of it. It's horribly depressing.
I'm just really frustrated and irritated that this happened, and Apple won't do anything. I do realize they don't HAVE to do anything- buyer beware and whatnot- BUT as a reputable company they should at least let me trade in with the discount or whatever. I didn't have to choose Mac, it was the most expensive computer I looked at- but it has so many awesome functions and things . . . that I can't even use . . .
As a poor college student I don't have the option to get a new computer or have Apple replace any parts in this one, so I just kind of feel like Apple screwed me over. Their fault? Maybe not. Their product? Yes, so they should want to keep me as a future customer. At least I think so.
I guess this isn't quite a question. But I would love more feedback, ideas, anything. Has anyone else had this problem? Can I replace my own video card? Will Apple do anything at all? I love macs but I might never get another one, since this could happen again.
And- unrelated- who changed the title of my post, and how, and why?

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

How do I fix the compatibility issue between my iPhone 4S with iOS 7 and my Pioneer car stereo? There was no problem with iOS 6, but now I get a message saying "this device is not compatible" and so I can't use Netflix for example. How do I fix it?

This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.

I'm tried to enter my credit card info but it keeps saying declined I had this issue a few years ago but I forgot how I fixed the issue

I'm tried to enter my credit card info but it keeps saying declined I had this issue a few years ago but I forgot how I fixed the issue

If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

How to fix the error code B200 of MP258 canon printer?

please help me how to fix the priter that has an error code B200 of MP258.

Hi guadaduque, thanks for posting! In order to allow the Community to better help with your question, we'll need some more information from you.
What exact computer operating system are you using? Once we have this information, the Community will be better able to help get you up and printing again!

How to fix the error code 1009?

How to fix the error code 1009?

Fix for error 1009 in iPhone 4S? - ThinkiOS
How to fix error 1009 with your iDevice . - YouTube
Change iTunes Store Country on an iDevice
1. Tap Settings;
2. Tap iTunes & App Stores;
3. Tap View Apple ID;
4. Enter your user name and password;
5. Tap Country/Region;
6. Tap Change Country/Region;
7. Select the region where you will be located;
8. Tap Done.
Also, see How to Change Your iTunes Store Account Location | eHow.com.

I got my iPhone disabled mistakenly by six trials of entering pass code. However now I remembered my passcode so how can fix the problem without losing my contents.

I got my iPhone disabled mistakenly by six trials of entering pass code. However now I remembered my passcode so how can fix the problem without losing my contents.

If your phone is now disabled, you've already lost all data on the phone...that's the whole point of the passcode, to protect the data on the phone. Your only choice now is to force the phone into recovery mode & restore it, as described here:
http://support.apple.com/kb/ht1212
This will remove the passcode, but also erase all data on the phone unless you have a backup to restore from.

How do I fix the buffering issues with the radio app?,

How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?

msbroome wrote:
How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?
What is your Internet data rate?

How to fix the issue Total CN amount show in FSCM not tally with total CN amount in GSAP?

Hi ,
How to fix the issue that is Tolat CN amount show in FSCM not tallying with Total CN amount in GSAP?
Can somepone reply for this asap ?

Hi Janet,
Use the transaction ABF1 PK 70 and 75 fill in the g/l account from the asset and TType 100. Don't fill in asset number.
Give only for this case authorization for ABF1 when the values are ok take away this authorization

How to fix the security code invaild

how to fix the security code invaild i keep writing the security code but it keeps telling me that it wrong what should i do?

please im talking about my credit card i was buying and every thing was ok till 6 days ago it says that my billing info was wrong or aomething like that and it says i have to update it i clicked billing info it says that the security code of my card is invaild and im so sure it vaild please help me and teach me what to do (please step by step)

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205)

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How to fix the troubleshoot issue code 205?

Similar Messages

Maybe you are looking for