How to fix UI breakage after ESR update to 31?

Hello. I just updated my firefox to the latest version. However, on the first run I couldn't help but notice the worst breakage at least since FF4.
See the screensot:
http://i.pictr.com/oyyw2nv2gv.png
The tabs are utterly broken. The only other part of UI that I actively used, the menu bar is gone, replaced with something that is wrongly positioned (tabs used to be on bottom), less functional (my buttons, customised menus and buttons are gone) and larger.
I see that I can get the menu bar back, but I can't get rid of the large piece at the bottom, which makes the exercise useless.
I can probably move features there, but:
* can I remove it? I really see no benefit.
* If no, can I get a real menu in it and
* can I make it appear above tabs?
And tabs. This is just awful. TabMixPlus used to be my biggest reason to use FF. No other browser scaled to well over 100 tabs.
Now there's a big conflict between the plugin and the new UI. What happened? How do I fix it? This is pretty much a show stopper, I can't live with FF that looks like this and I don't want to live with one w/out good tabbing support, which will force me to stay with the previous version. I don't want to do it again....

Hi Twitty, two things:
(1) Multi-row was never a built-in feature. TabMixPlus still has that option ([http://tmp.garyr.net/support/viewpage.php?t=3&p=display-tab-bar help page]), and I haven't seen reference to any problems with it in the current version. Could you verify that it's still selected in TMP's options?
(2) userChrome.css does have a capitalized C and goes in a chrome folder inside your currently active profile folder (this folder does not exist by default in recent versions of Firefox). http://kb.mozillazine.org/UserChrome.css

Similar Messages

How to fix scanner problems after OS update?

Ever since OS update (OSX 10.9.2), when I scan to my Apple Macbook Pro (8,1) from the HP Photosmart Prem C410 the scanned document appears in the HP scan program (HP scan 2.4.3(3)) but now the scan won't save or send. I get an error message saying: "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only." The scanner program on my HP C410 printer continues to work well with other computers. My laptop is up to date with all the updates that are available. How can I fix this?

Try scanning with Preview or Image Capture... same results? If not, then I would assume that there's a problem with the HP scanning software and you should get in touch with HP's technical support folks.
Clinton

How to fix a bug after updating to 5.1.1 version for apple tv?

How to fix a bug after updating to 5.1.1 version for apple tv?
It stopped working freezing in the initial screen....
Ihad alreadt tried to disconect the cables, the control everithing...

How to fix a bug after updating to 5.1.1 version for apple tv?
It stopped working freezing in the initial screen....
Ihad alreadt tried to disconect the cables, the control everithing...

TS3694 When I try to update my ipad to IOS6 I get and error 6 message. Any idea what that means and how to fix it? I tried updating via Itunes and also normal download.

When I try to update my ipad to IOS6 I get and error 6 message. Any idea what that means and how to fix it? I tried updating via Itunes and also normal download.

What model iPad and what version of iOS is it currently running?
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
 Cheers, Tom
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.
Message was edited by: Texas Mac Man

HT204321 i am getting a pink blur link in sunlight how to fix this i had been updated my ios to 8.2 i faced this problem in ios 8.1.3

i am getting a pink blur link in sunlight how to fix this i had been updated my ios to 8.2 i faced this problem in ios 8.1.3

Please define "pink blur link." iOS 8.3 is the current version.

How do I verify iCloud after I updated already?

How do I verify iCloud after I updated to software 5.0? A message about account settings keeps coming up, although setting are fine

You should have received an email which you can follow for verification. if you haven't received one, Start here, change your country if necessary and go to manage your account. Ask for a new email to be sent to you.

How to fix your iPod after it got disabled to how it says connect to iTunes

How to fix your iPod after it got disabled to how it says connect to iTunes

i can probably help but i need more information

How I "fixed" my iPod after the latest update screwed everything up

I am not sure if this will help anyone but here is what I have been through and done. I also don't know if this "fix" will last. So far it has been 24 hours and my iPod still works. To be honest I was surprised anything worked since this whole fiasco started. Good Luck!
(Please know I am not telling you to do this, just letting you know what I did and what happened. I have no idea if the slap to the hand actually did any good or if it is all just coincidence.)
After installing the latest iPod updater my iTunes would not recognize my iPod and when connected to the pc the iPod would simple flash do not disconnect. This would not stop no matter what I did. Once I removed the iPod from the pc sometimes it would go to the menu and have music on it and other times it would not have music on it. On some occasions I would get the folder with the exclamation point. I did try to reformat the drive through the pc and/or restore it through the updater but since it kept flashing do not disconnect the updater could not "mount" the iPod and the pc was never able to access the drive. At one point I was able to access the drive and reformat it but it said it could not finish the formatting. After three days of trying to do all of these steps over and over I finally put in a ticket to have it repaired by Apple.
I did reinstall iTunes to its latest update but kept the updater at the version that originally came with the iPod on the Cd.
Which leads me to the final step. I had heard that other folks had slapped the iPod against their hands and suddenly they would work again. So I figured, at this point, what do I have to lose? (Please know I am not telling you to do this, just letting you know what I did and what happened. I have no idea if the slap to the hand actually did any good or if it is all just coincidence.) I plugged the iPod in and watched it flash its message to do not disconnect, I reset it and then forced it to say do not disconnect, then quickly disconnected it. Once removed I slapped the side of the iPod against the palm of my hand. The drive did spin up and the picture which tells you to plug the iPod into the wall appeared, which I did. It showed the apple logo, a status bar ran and then went to the menu and reset itself.
I connected the iPod to the pc with the current iTunes program, old iPod updater version, with my playlists and library intact and it started to update the iPod with my library and playlists. Once finished I manually disconnected the iPod and safely removed the hardware.
So far it works fine. I used it at home and in my car. I have not tried to use the new updater again. Honestly I fear what would happen.
Dell Windows XP Pro iPod 3rd Gen 40Gig

Hi Zmajev,
If you are having syncing issues after an update to iTunes 11.2.2.5, you may want to try updating to the most recent version (iTunes 11.3, which was just released yesterday) and see if the issues still persist. You may find the following article helpful:
iTunes: How to install the latest version
http://support.apple.com/kb/ht5654
Regards,
- Brenden

How to fix No service after up date ios5 for iPhone 3GS

Update my iPhone 3GS to iOS 5 looks like it up dated fine but now phone has on service how do I fix this.

My iPhone 3gs was doing that after I updated also. I believe I may have fixed mine. I did a backup to iTunes, then I did a reset through iTunes (takes forever) then after that was done I right clicked where it says my phone in iTunes and hit Restore from backup, it is very important that you do not let the computer go to screen saver or to sleep during this process, I eventually had to change my computer's setting for this because it interrupts the process. And voila! It fixed mine, and I got to keep all my media, except the ringtones, they will have to be re set to your contacts individually, if you had them like that in the first place! Hope this helps!!! An now I haven't noticed any irregular battery drainage!

How to restore safari bookmarks after osi update

how to restore safari bookmarks after ios. update

The only way is to restore from a useful backup, if you have one.
If you sync the iPad to iTunes and use Time Machine regularly, you would likely have the appropriate backup to restore from. In that case:
Restore the iPad backup set from Time Machine from a date before you overwrote the bookmarks. The location of the backup is ~/Library/Application Support/MobileSync/Backup/ (you can get to it by pressing Cmd+Shift+G in the Finder and entering this path).
Connect the iPad, run iTunes and restore from the backup.
If you use iCloud Backup, then you can restore from iCloud and choose which date's backup you'd like to restore from. You can check if you're using iCloud Backup by opening the Settings app on the iPad, then going to the iCloud submenu and looking at the status right below "Storage & Backup", where it would say "iCloud Backup is off." (or "iCloud Backup is on.", as the case may be).
In any case, keep in mind that restoring from a backup means you lose all application data changes after the date of the backup.
Also see Restoring from a previous iCloud backup.

How to close my app after last update

I can't close my app with normal way after last update
Need help for this
Thx

You still double-click the home button to open the multitasking bar, but you now drag or swipe the app 'screens' up from there and off the top of the screen :

HT5624 how to open disabled ipad after installing update

help me to open or wipe clean my ipad which was disabled after system update in which the computer says i entered 4 digit pin of which i did not enter
i tried itunes but it cant connect due to it being disabled. is there a phone number i can call.

Hello there, rickh.
The following Knowledge Base article provides the assistance you are looking for:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
In the future, if you'd like to contact Apple directly a great place to start is:
Apple - Support - Product Selection
getsupport.apple.com
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to turn off alarm after system update?

I get alarm when restarting my T400 after system update. Can anyone give me suggestions to turn off this alarm?
Thanks,

I have no display > powercontrol in openbox, gnome or fluxbox, What are you talking about?

How fix email launch after SN update

After re-installing the latest SN update to fix a M$ Office glitch, now my puter cannot access my yahoo mail. I can through a, yuk, PC. Neither Safari nor Firefox work.
Please post reply and not by email, dugh, it doesn't work.

NEVA MIND. It turned out to be a yahoo issue and mysteriously fixed itself. Just wonder if anyone else experienced the same.
rkaufmann87:: Dude / Dudette, thanks for the info. I should have typed SL. I did work a long while at yahoo service webpages, but never found an answer. It just started working...dugh. Must be using Windows server.
Stay Cool

How to fix three monitors after installing latest Mac update?

I installed the latest release, OS X 10.9.3 (13D65), and now my three monitors are all messed up. I tried going into sytem preferences and looking at the monitor set up there, but nothing helped.
When I move my mouse, I never know where it is going to show up, and it does not move properly from one screen to another.
Any ideas?

From the Mac discussion forums: http://discussions.apple.com/thread.jspa?messageID=4930170&#4930170
Try this: download and retrofit (force install) QT 7.1.6 using Pacifist, then run the 10.4.10 Combo Updater for Intel Macs. Make sure it is the "combo" updater. Be sure to restart in safe mode after using Pacifist and then install/re-install the combo update (while in safe mode). For all those "non-techie" people (like myself), please try this if you already haven't and please read the instructions for Pacifist - if you use Pacifist correctly, it will ask you if you want to replace (vs. update) all of the Quicktime components (yes, you want to replace), so you will know that you are accomplishing what you need to. The first fix I tried was just to reinstall the Mac OSX10.4.10 combo update for Intel Macs and this did not work, but when I used Pacifist and then reinstalled the MacOS X combo updater (do not get this confused with the update that is not the "combo" one- (use the links), it worked! I am not a web developer, so did not have to deal with the Java 6 stuff.
Combo Intel update is here:
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10410comboupdat ev11intel.html
QuickTime 7.1.6 is here:
http://www.apple.com/support/downloads/quicktime716formac.html
Pacifist is here:
http://www.charlessoft.com

How to fix UI breakage after ESR update to 31?

Similar Messages

Maybe you are looking for