How to fix windows 7 sound problem

Hello, I've been searching all over the internet for a solution on how to fix a windows 7 sound problem. I'm running it on bootcamp ,but There's absolutely no sound to it. Is there anyone that can please help me?

Hi;I followed your instructions but still it is the same!
Regards
      From: Pat Willener <[email protected]>
To: Said Ahghari <[email protected]>
Sent: Saturday, 10 January 2015, 3:58
Subject:  How to fix windows 7 cannot find AcroRd32.exe file problem as Reader cannot be opened and nor the pdf files.
How to fix windows 7 cannot find AcroRd32.exe file problem as Reader cannot be opened and nor the pdf files.
created by Pat Willener in Adobe Reader - View the full discussionEven more strange!  The only thing I can think of is a complete uninstall/reinstall. Download, unzip, and run the cleaner tool http://labs.adobe.com/downloads/acrobatcleaner.html then download and run the offline installer from http://get.adobe.com/reader/enterprise/ If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7082910#7082910 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7082910#7082910 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" 
Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Similar Messages

  • Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset  please help thanks!!!!

    Guys how to fix the audio problems of my itouch? The volume bar dosnt exist and the loudspeaker doesnt work. . .Sounds only works in headset  please help thanks!!!!

    Post this in the iPod Touch forum.
    https://discussions.apple.com/community/ipod/ipod_touch
    B-rock

  • How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

    I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
    There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
    I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
    Thank you in advance guys.

    You probably should look at a more 'serious' audio interface rather than the Realtek
    Yes ASIO drivers are the way to go
    If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
    There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

  • HOW TO FIX THE WIFI PROBLEM

    HOW TO FIX THE WIFI PROBLEM: Settings > Wifi > (little blue arrow) > scroll down to "Renew Lease" and then click on it.
    Enjoy

    Didn't work for me.
    What did work was going to the Wifi network settings and setting the HTTP Proxy to Auto rather than Off.
    Worked for both iphone4S and ipad2.

  • How I fixed my conection problem

    Here's my setup:
    Wireless IP (Motorola canopy)
    The connection comes into the house as ethernet (I'm conected wirelessly to the ISP's router and it's using DHCP
    That's pluged into an airport express that acts as a bridge to the ISP's router
    iMac G4 wireless
    Windows xp notebook wireless using a Netgear PCMCIA card
    Son's XP desktop using a DLink internal wireless card
    Symptoms:
    This worked but after several hours the airport express wouls stop forwarding the new DHCP info. The green light was On but I could not connect to the internet wirelessly.
    Here's how I fixed it:
    I turned off ipv6 in the network settings. I had it set to Automatic. When I turned it off It has worked like it is suposed to.
    I hope this helps someone.

    The fact that you saw no glitches while running Logic before applying the update means almost nothing because that uses only a small subset of system resources. Far more significant is that Safe Mode restored some missing functionality: because it disables non-essential items like user fonts, third party drivers, & so on, it points to problems in those areas.
    Equally significant, the fact that there are relatively few reports of post-update problems among the several million Snow Leopard users points away from the update itself as the cause of your problems.
    Separate & apart from that, it so happens that I'm a sound engineer/system designer/board operator with nearly 40 years of professional touring experience. FWIW, I never have & never will update the software of any system I must rely on professionally (whether it is running on a Mac, a PC, or dedicated hardware) unless & until I can thoroughly test it first and I have a trustworthy backup/recursion strategy to fall back on in case of problems.
    I strongly suggest you learn from your unpleasant experience & do the same. I have had far fewer problems with Macs than with PC's, but nothing is 100% reliable to begin with. Changing the OS software part way through the tour is just asking for trouble, no matter how reliable that has been in the past. Even if the budget allows for nothing better than a stack of burned CD's & a couple of consumer grade CD players, no professional tour can afford to be without some fallback strategy in place. That should be self-evident & require no warning from Apple or anybody else.

  • Please tell me how to fix this annoying problem

    Whenever I open a new Safari window (apple-N) the page width falls just short of completely filling my monitor screen. I'd like it to go to the absolute extreme edge of my screen by default, how do I do this?

    I just posted a new topic with a possible fix to your problem. The topic's title is "Javascript Bookmark to resize Safari Windows", or try the following link:
    http://discussions.apple.com/thread.jspa?threadID=1317489&tstart=0

  • How to fix Software Update Problem?

    I was do some update includes new 10.5.1, iTunes, QuickTime, and many more, but today I test to check new update I got blank list and I was try to do via Terminal and got this message
    Software Update Tool
    Copyright 2002-2007 Apple
    XML parser error:
    Encountered unexpected EOF
    Old-style plist parser error:
    Malformed data byte group at line 1; invalid hex
    What's going on? and How to fix it my Leopard Software Update Problem

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • I've no idea how to fix my service problem ?

    So a day or so ago my phone was having troubles finding wifi so I turned it on and off of airplane mode, it found the wifi , but soon after my service depleted ... I turned my phone on and off but the service did not return , I then reset the network settings and I had service again ! But only due to 3G which my plan doesn't cover so it had to be turned off ..I still have no service and I can't figure out how to fix it. So if you could tell me how that would be lovely !?? One more thing ..does 3G cost money , if it's not in your plan, but you are connected to wifi ? With 3G my phone gets 3 bars but without it goes to one bar immediately and then says "searching /no service " soon after
    I also don't know if I'm posting this in the right place or again, sorry :/

    It's hard to say what the problem is, but if you are concerned about data charges from using 3G you can turn off cellular data in Settings > Cellular to eliminate all doubt. Slide Cellular Data "off". That will constrain your data connection to Wi-Fi only.
    Have an Apple Store evaluate your iPhone.

  • How to fix exclamation mark problem

    Basically since I updated to iTunes 11 and I went to make a new cd to listen to in the car a lot of my songs have got an exclamation mark next to them and says it can't find the original file so since I HATE the new iTunes i decided to downgrade back to iTunes 10. what ever it was before the update came out to see if that would fix the problem but no that didn't work, so I've since been looking all over Google to try and find a solution to this but everything I found was mostly about moving the iTunes library and how to fix that problem but in my case that isn't the problem at all as I haven't moved the library anywhere, I did find a post about transferring purchases from my iPhone to iTunes so I did that thinking it would fix the problem as all the songs that have the exclamation mark next to them are on my iPhone and play back perfectly fine but iTunes would only transfer my app's not my music, is there a way to change this? Or if anyone else knows how to fix this problem in a different way I would very much appreciate the answer to this problem as it's driving me insane!
    Thanks in advance
    Jordan

    This happens if the files are no longer where iTunes expects to find them. Possible causes are that you or some third party tool has moved, renamed or deleted the files, or that the drive they live on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use CTRL+I to Get Info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes. See this post for a detailed explanation of what the script does.
    If your media is scattered around you may need to repeat the search using each of the different locations where you have stored things.
    tt2

  • How to fix Windows 8.1 "limited access" internet?

    I have just upgraded to Windows 8.1 (NOT preview) from Windows 8 a few days ago and now the internet completely doesn't work on my Asus X550CC series notebook. It displays "limited access" and sometimes the internet bars has no indication of
    a limited access. Internet was fully functional before I upgraded my notebook. Internet broswers, IE, Firefox and Chrome and Windows applications don't work. There's nothing wrong with my wireless internet because it works perfectly on other computers and
    internet devices. Please help, this internet problem is really causing inconveniences! What can I do to fix this problem? Thanks.

    Thanks for the reply,
    I've already read that article and it has not helped me with my problem.
    I've done a Windows Connection Diagnostics test and says it has detected problems that were not able to be fixed automatically:
    "Problem with wireless adapter or access point" and
    "Your computer appears to be currently configured, but the device or resource (www.microsoft.com) is not
    responding" What does all this mean anyway?
    I was advised to reinstall my laptop NIC driver by AsusTek and hopefully that'll resolve my problem, I'll let you know.
    Edited:
    When I opened my computer, I realised I had internet access and was so happy, soon finding out it only lasted for 15 mins and then dropped completely and wouldn't come back. The next day, I went on to see if
    it'll work again and it did! I quickly checked if there was a Windows Update and there was, updated and internet is back and running smoothly, fixing my "limited access" issue.
    Hope this fixes your same problem, goodluck.

  • How to fix Windows 7 error 126

    How do I fix Windows 7 error 126 when trying to open itunes

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (100098)

  • How to fix screen rotation problem in iphone 5s?

    screen is not tilting while playing and messaging on iphone 5s ios 8.1.3.
    is it a hardware fault or software?
    how to fix it now?

    Is "rotation lock" set in the Control Panel?
    The Control Panel is accessed by swiping up from the bottom of the screen. Check the icon with the padlock and circular arrow.

  • How to fix my sound? my sound wont work at all

    Please can anyone tell me what to do to fix my sound.?

    you're publishing an html5?  a swf? an air app?
    you're playing your sound by adding to a timeline?  using actionscript?  createjs?

  • How can I fix no sound problem during calls since I have upgraded iphone 4 to ios 7?

    Hi friends
    Since I have upgraded my iphone 4 to ios 7, I am practicing too much problems regarding to sound:
    - playing music has no sound at the same time no sound in during phone calls unless I open the speaker.
    - sometimes sound in music and phone calls comes back for short period and then same problem occuring again.
    I think and I beleave it is software problem and I feel that ios 7 have killed my iphone.
    any one has any idea how to solve the problem or downgrading  back to ios6

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • How do you fix the sound problem due to software 10.6.8

    my speakers work when i turn on my computer they make the sound but when i try to listen to something on itunes it doesnt work.

    obush1 wrote:
    when i try to listen to something on itunes it doesnt work.
    What's iTunes' volume setting?

Maybe you are looking for

  • Creation of Generic business Object for a standard transaction

    Hi, We have a requirement where we are depreciating the assets (standard transaction ABAA) using a custom BDC program. We need to maintain a history (called audit trail) for the particular asset that has been depreciated using this program. For this

  • 16:9 sequence becomes 4:3 QT movie

    I'm using FCPHD 4.5 with 16:9 DV footage (720x480 anamorphic) I edit my sequence in FCP in 16:9 (Pixel aspect is NTSC CCIR 601 and Anamorphic is checked) and do an Export/Quicktime Movie (DV NTSC 48 kHz Anamorphic) I open the resulting file in QT Pro

  • Legend needs to display Prompt values / Remove filters from chart query

    Hi I have 2 questions for the same chart so I hope it's OK to add them in one post. Firstly I have created a chart & added three Select List filters which work fine, the query is below, problem is that when I change back to '-ALL-' I get no data, it

  • Maximum number of characters for a BPEL string variable

    Hi, What is the maximum numbers of characters that a string variable in BPEL process can hold??. Is there any document which describes the datatypes in BPEL. Regards V Kumar

  • Windows 8 Install fails at 90%.....?

    I brought W8 yesterday and dual booted it with W7 just to test it out. It ran fine. Now I deleted the W8 dual boot partition and now I am trying to update my W7 install to W8 but it keeps failing at 90%. Any ideas will be greatly appreciated. T410(25