How to fix windows 7 startup failure? Windows startup repair cannot help

Recently, my laptop have problem with the startup and unfortunately it is showing crash dump error as well.
This is the error mesage for startup issues: c000021a fatal system error, intial session process or system process terminate
and this is error message for crash dump: STOP: 0x0000000A (0xFFFFF80003BEDE60, 0x0000000000000002, 0x0000000000000008, 0xFFFFF80003BEDE60)
So, when i start my laptop it comes up with the startup c000021a fatal system error. I tried to go to startup repair and chose the "Last Known Good Configuration (advanced)" after that it shown system crash dump error message.
Unfortunately, I did not make the restore point. I want to reinstall my windows but it cant boot from CD/DVD due to startup failure. I already choose the booting sequence to CD/DVD as first sequences but it still does not work.
Anyone can help me with this issues?

Hi Arie K,
Please explain a bit about the following question for better analyzation:
1. What changes have you made before this issue?
2. Do you receive the same error message when we use the normal boot, safe mode and Last Known Good Configuration? If no please share it with us.
3. What error messages do you receive when we try to boot from CD/DVD?
We could try to use the USB driver to performance the system restore or reinstall.
For more information, please refer to the following article.
How to Build a Bootable USB Drive? or How to Install an Operating System from a USB Device?
http://blogs.technet.com/b/chenley/archive/2011/10/06/how-to-build-a-bootable-usb-drive-or-how-to-install-an-operating-system-from-a-usb-device.aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

How i fix the problem on windows 7 itunes could not connect to the iphone because an invalid response was received from the device

How i fix the problem on windows 7 itunes could not connect to the iphone because an invalid response was received from the device

take a look at https://discussions.apple.com/message/24243668#24243668. i had this problem and that solved it for me.

The iphoto on my macbook isn't responding. I click on the app but once it opens it starts to load and thats all it does. The wheel continues to spins. any one have any suggestion on how to fix the problem? i'd appreciate the help =]

The iphoto on my macbook isn't responding. I click on the app but once it opens it starts to load and thats all it does. The wheel continues to spins. any one have any suggestion on how to fix the problem? i'd appreciate the help =]

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

How to Fix my Error in windows 8.1 64 bit

Hi, I have many errors at my Asus A46CB core i5 like error System Thread not handled, error equal or less
and error power driver state failure. my laptop will restarting and run normal after that.
how to fix my laptop? my OS is windows 8.1 enterprise RTM 64 bit.
please help me because i'm very confuse and crazy with this error.
i'm very thankfull if there's someone to help my problem.

Hi
Sorry for the late respond
I check the dump file, try to update your graphic card driver and others driver if haven't update yet
http://support.asus.com/download.aspx?SLanguage=en&p=3&s=431&m=A46CB&os=&hashedid=n%2fa
You can also learn how to check dump file using
this or this
Semoga berhasil

How to fix itunes error 7 (Windows error5)?

downloaded and used itunes, on laptop(Acer), but when I tried to reopen I get error message, Not installed properly. Reinstall itunes. Error 7(Windows error5). Why does it work fine, but then not work, and display this error message days later?

Hi surferman!
It sounds like you will need to uninstall and reinstall iTunes to fully resolve this issue. iTunes requires that the components of iTunes be uninstalled in a specific order from the control panel, and that specific order can be found in this article about uninstalling and reinstalling iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
It is important to note that:
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
These steps may take a significant amount of time to complete, depending on your system.
If you run into any issues while attempting to reinstall iTunes, you may want to reference this article as well:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for using the Apple Support Communities!
Cheers,
Braden

How to fix iphone 5s stack recovery mode..Please help me

How to fix iphone 5s stack recovery mode..i have tried So many ways and aloso tryed with 3rd party software but nothing happens...i trying with iTunes but error 14 message appare..i am from bd that's why in my country doesn't have any apple service center

Error 14 is typically a hardware failure, but can be caused by security software...anti-virus, firewalls, etc. Given what you've posted, I suspect a hardware failure, & if that's the case, you won't be able to restore the phone. You'll need to find a service center to confirm.

TS3212 How to fix iTunes install failure on Windows 7?

Current ITunes user on Windows 7 & app working fine. Dialog box pops up stating update to install. Proceeded but install failed with suggestion to download update. Down loaded off Apple web site. During installation got message activating mobile devices failed even when user had administrative privileges. I chose ignore. When I ran new iTunes install got "Program can't start because MSVCR80.dll is missing..." Tried reinstall. Same problem.
Suggestions?

Try the troubleshooting for that error code on this page : Apple software on Windows: May see performance issues and blank iTunes Store
Or there is this post which appears to have worked for a number of people : error iTunes Store : 0x80090318 (the solution).

How to fix this error? The startup disk cannot be partitioned or restored to a single partition.

Hey guys,
I am trying to install windows 7 ultimate 64 bit via bootcamp assistant. I open bootcamp assistant from utilities and i get the second window and try to click continue and i get a pop up, saying "The startup disk must be formatted as a single Mac OS Extneded (journaled) volume or already partitioned by Boot Camp Assistant for installing Windows." I looked around on the internet, i found that my internal HD must be set to OS Extended (Journaled). I went into disk utility and i clicked partition tab and the option was set to OS extended (journaled). Any ideas on how to overcome this error so i can install windows 7?

Error is:
1: common
2: misleading and poorly worded
3: space must be:
A: contiguous, that means unfragmented and in ONE section, not multiple
B: files cannot be loced, anchored or in such a manner as to prevent or block partition operation
C: to move, unlock and shuffle files requires booting from another drive or device
Shrink the HFS+ volume by as much or more than you need to set aside to use
If that does not,
Try iDefrag from another hard drive or by burning and using its own CD that is just for consolidating free space
Clone your system (should have backups already, clone is just bootable)
Erase and restore from clone - SuperDuper does consolidate files and free space and result in unfragmented (99% success rate)
None of which has to do iwth what that error message says. This error has been almost a daily threat topic - has gotten less but has not "gone away."

Cant figure out how to fix my labtop, Acer Windows 8

Hello,
Something was uninstalled on my labtop (acer, windows 8), it was something that had to do with office. So now when I try to open any files made in word, excel, powerpoint, ect. They wont open.
This is what I have tried and gotten no luck:
1) I tried reinstalling Office Mircrosoft Professional Plus 2013 (This is want I installed when I first got the laptop). When I put in the disk it asks me if I want to run it, when I click on YES, another message pops up saying: Something went wrong,
sorry we ran into a problem, try going online for additional help. (Which hasn't been helpful).
2) I tried doing a System Restore, but it ran through the restore and didn't change anything. I tried doing it again, but it now wont even let me do a restore. So I tried the Advance System Recovery, but it wont run also.
3) I then went into the Run System File Checker tool to troubleshoot the issue. A list of all the programs (expect for office) popped up and the only problem it
came up with was that the Blue Tooth Audio Device has a driver problem and needs to be reinstalled. But I don't know how to do that. And I'm not sure what I'm even looking for in the list of programs for the troubleshooting.
Also, other issues I'm having is that its telling me I cant change things unless I'm the admin, but I am and I don't have any other user accounts set up. It also tells me I have things open in other accounts and so I cant make
changes to whatever it is at the moment I'm trying to change. I've been trying to change a few things not know really what I'm doing.
Any advice or steps to take to figure out how to get my labtop working like normal?
If the issue still exists, run System File Checker tool to troubleshoot the issue:
1.
Insert the Windows 7 installation DVD into the DVD-ROM; Click Exit if the auto-menu pops up.
2.
Open an elevated command prompt. To do this, click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator.
If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
3.
At the command prompt, type the following command, and then press ENTER

Do you mean in your from field or the signature field?
where does it show up...? it wouldn't be on the iPhone as that doesn't show a from field. Check the account details in MM open it up go to settings and check you typed it in right simple as that if it's on someone elses hardware when they recieve an email from you then they need to fix your name in their contacts.

How to fix Unknown device in windows 7

Hi
I have just install windws 7 pro on HP Envy dv6-7200SA Notebook PC
When I open Unknown device Properties, I see following in details
For
Other devices
       - Unknown device
           ACPI\HPQ0004
                *HPQ0004
How do I fix it.
Please can you help me.
thanks
Ish
This question was solved.
View Solution.

Hi,
The hardware id is for HP 3D DriveGuard - the driver you require is on the following link,
http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64144.exe
When the installation has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

What is, how to fix, stop, small popup window from 'plugin-container.exe' with 3 digit number that won't stop re-appearing???

I get very small windows popping up on the screen on top of anything else I'm doing regardless of what apps I'm running or not running. If I R-click on the icon in the task bar, it's identified as "plugin-container.exe"
The window doesn't say why it's there, but only displays a 3 digit number (for example the on on the screen now says 587) and allows only the usual X to close, or an 'OK' button to close. But a short time later it pops up again.
I'm running Windows 7 64bit MS Security Essentials and Firefox, though it will pop up even if I just booted and haven't started Firefox yet.
It's really (really really) annoying. How can I fix it or disable it or whatever it takes to make it STOP.
Perhaps if I had some idea what it was I could attack it that way, but I haven't a clue. BTW, I've cleaned the registry, and done full scan's for virus and turned up nada.
Thanks.
D.

As per the web site:
There will be no update to Waterfox 25.0 as a bug causes Adobe Flash to crash on 64-Bit Windows 7 systems. Bug here. Although Firefox 25.0.1 is now available and we could build it, there would be no point of releasing a new version of Waterfox for only two weeks.
I mostly only use Waterfox and had no problem in the past. I suspect a flash problem may be at the root of my problem however.
As stated, I've performed (full) virus scans with MS Security Essentials. Also with Housecall, and also with HiJackThis. No problems detected.
Screen shot of popup window attached.

How i fixed my Itunes sound (windows)

Hello,
I along with many members of this forum have been having serious sound issues. I have somehow managed to fix it tonight, as well at quicktime playing the distorted green videos. I did 3 things, and i dont know which 1 did it, but i encourage everyone to try all 3.
1) Reinstall your sound drivers (I have an Audigy 2 ZS)
2)Open quicktime settings and click advanced at the top, then click "empty cache" and check the box saying "enable playback of flash tracks"
3)Redownload DirectX9 and run it. When you open it, it will almost instantaneously say completed, but do it anyways. Reboot the computer and try
Please let me know if this helps anyone, I hope this can fix it for some of you!

bump
I was having trouble seeing my Nano 2nd in iTunes and was afraid to do this step; but it works. My Nano was updated to version 1.1.1 and now everything seems to work perfectly. Keep in mind you will lose everything that is stored on your Nano when you format it.
Gateway 733mhz Windows XP

How to fix "access denied" in windows vista with Deskjet 3056A J611 Series

I am really struggling with getting the printer recognized in windows vista 32 bit. No matter what I try (including HPPSdr)
I keep getting "access denied" or windows cannot print?!
Does anyone have a solution to this?
HELP!

I'm sorry, but the subject seems to have been cut off. What Printer are you using? How is the printer connected to the computer, USB, wireless, or Ethernet? Is the printer installed and when you use it you are getting this message, or are you getting this message during installation?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to fix 'save as' dialogue window?

This happens in all of my Adobe software as well. But, when I go to save a file on my 2nd monitor the dialogue window is un-usable and can't be moved.

Reset preferences or try to change the resolution of your screen temporarily.

How to fix PDF-Preview on Windows 7 x64

Hey Folks, I'm recieving this Error, with Adobe Reader 11 beeing the only PDF-Reader on a Win 7 x 64 system.
Please wait...
If this message is not eventually replaced by the proper contents of the document, your PDF
viewer may not be able to display this type of document.
You can upgrade to the latest version of Adobe Reader for Windows®, Mac, or Linux® by
visiting http://www.adobe.com/products/acrobat/readstep2.html.
For more assistance with Adobe Reader visit http://www.adobe.com/support/products/
acrreader.html.
I found some articles about this, but they are all Debian-Based, so I hope some of you ar abled to help me.
Regards,
b1naryb0b

I checked it and on the PC's web browser Adobe Reader is the default program for opening PDFs.
Maybe there is a misunderstanding. The problem is not occuring in the webbrowser preview. This occurs in the windows preview. Do you have any other ideas?
Thanks for your help in advance

How to fix windows 7 startup failure? Windows startup repair cannot help

Similar Messages

Maybe you are looking for