How to fix xcodebuild error: The directory /Users/SmilingTornado/ does not contain an Xcode Project

I am trying to fix my bash but the error: "xcodebuild error: The directory /Users/SmilingTornado/ does not contain an Xcode Project" means that I cant continue to recompile my bash so I have not started the process of patching yet

OS X bash Update 1.0 – OS X Mavericks

Similar Messages

  • RDS Gateway + Smart Card Error [ The specified user name does not exist.]

    I have the following Windows Server 2008 R2 servers:
    addsdc.contoso.com, AD DS Domain Controller for contoso.com
    adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
    fileserver.contoso.com, RDS Session Host for Administration enabled
    rdsgateway.contoso.com, RDS Gateway enabled
    tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
    And the following Windows 7 PCs:
    internalclient.contoso.com
    externalclient.fabrikam.com
    There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
    I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
    From internalclient.contoso.com, I can RDP to fileserver.contoso.com
    using the smart card just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
    From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
    via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
    BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
         The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support. 
    When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
    - but I'm pretty sure this is a supported scenario?
    The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
    [email protected] which matches the UPN of the user account as it was auto-enrolled.
    Does anyone have any ideas?

    I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
    to use NLA.

  • The specified UNC path does not contain a valid WIM file or you do not have permission to access it. please specify a valid path

    I loaded 4 captured images into SCCM via the Add Operating System Image Wizard 2 months ago.
    I have since captured another image to the same location (which is the SCCM site server) and tried to add it to the server.
    I am getting error
    the specified UNC path does not contain a valid WIM file or you do not have permission to access it.  please specify a valid path
    nothing has changed on the site server that i can think of.
    i am domain admin and permissions have not changed.
    anyone got any answers?
    please help i am baffled

    I am having similer issues.
    Win 2003 SP2 - SCCM2007 SP2 R2 single site with MDT2010 intergrated but can not get a MDT2010 TS Captured WIM to import into SCCM OS Images "Invalid WIM". allso i tried to mount the MDT WIM image without luck (Invalid Image). however a SCCM TS
    will Capture and I can Import it into OS Images. it seems like something is amiss with MDT or WAIK possibly.

  • The selected Flex SDK does not support building mobile projects

    I am unable to create a new Actionscript Mobile project.  The new project dialogue gives the error: "The selected Flex SDK does not support building mobile projects."  I tried seting the default Flec SDK both to the SDK included with Flash Builder 4.7, and also to a version of the 4.6.0 SDK (build 23201) with AIR 3.3 SDK overlayed on it, which already existed on my computer.  Both resulted in the same error.  Any ideas?

    Hi ,
    Actionscript Mobile projects use AIR SDK by default in Flash Builder 4.7 . Flex SDK won't be used for Actionscript projects.
    Could you please try creating an Actionscript project in fresh workspace and let me know if the issue still exists.
    Also attach screenshot and error log if any.
    Thanks,
    Sanjay

  • I have an iPad 2 and so does my mom.  We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it.  Deleting it and reinstalling does not work.

    I have an iPad 2 and so does my mom.  We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it.  Deleting it and reinstalling does not work.

    Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
    Just a guess.

  • How to Fix my Iphone 5c flash light it does not work

    How to Fix my Iphone 5c flash light it does not work

    Welcome to the user to User Technical Support Forum provided by Apple
    Try This...
    Close All Open Apps... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons..

  • Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

    Hi All,
    I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
    new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
    "Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
    Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
    Thanks

    Hi PMunshi,
    According to your description, you get the above error when processing the time dimension. Right?
    In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
    reason. Please change the setting in Proactive Caching into "MOLAP".
    Reference:
    How To Implement Proactive Caching in SQL Server Analysis Services SSAS
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou
    TechNet Community Support

  • MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

    Hi
    I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
    error message.
    "Error: the 'MBAM Policy' view does not exist"
    Any ideas why this is? I get the same error message with all 4 reports.

    Hi Slycy,
    There is another thread that seems to be a similar issue
    here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
    Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
    Make MBAM MOF changes
    Select TPM spec version in hardware inventory
    Install MBAM CM Integration feature
    Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
    Perform hardware inventory
    Update MBAM Supported Computers collection membership.  The machine should appear if it meets the criteria
    Run another machine policy refresh on the client so that the Configuration Baseline will come down
    Make sure that the MBAM agent has woken up once
    Evaluate the Configuration Baseline
    The MBAM views should be created now.
    You don't have to do this for every machine, but this is the process to speed it up.  If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
    Hope this helps,
    David

  • Error: The installed graphics card does not meet the minimum system requirements by Aperture

    I have a Mac Pro 3.1 10.5.8 and Aperture 2.1.4.  My NVida 8800gt with 512 mb was over heating so I brought and install the ATI radeon hd 5770 to replace it.  Now when I try to start Aperture I get this message "Error: The installed graphics card does not meet the minimum system requirements by Aperture".  All other software works fine, ie photoshop elements and Safari.  When I install my old card aperture will open with no problem, but of course the card will overheat within 10 mins and I will have no video.  I have search on google with no luck.  Will upgrading to Aperture 3 fix this problem?

    5770 requires 10.6.5.
    The 8800GT - there is the 350* bake in over 10 minutes - 50% or better chance
    you can find 8800GT on http://myworld.ebay.com/macvidcards/
    http://www.macupdate.com/info.php/id/23049/smcfancontrol
    http://www.bresink.com/osx/HardwareMonitor.html
    Fan control helps with FBDIMMs which need to be kept under 70C too.

  • Error (Data mining): The specified mining structure does not contain a valid model for the current task.

    I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
    Actual(Service Description).SE value
    Actual([Service Description]).[SE value]
    Actual(Service Description)
    Actual([Service Description])
    just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
    Error (Data mining): The specified mining structure does not contain a valid model for the current task.
    the following is my mining model structure

    Association rules does not allow for cross-validation
    Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

  • I have deleted playlists from my iphone4 that I wish to restore. The current back up does not contain them either. Can I use a back up from yesterday? How do I find it on my laptop?

    I have deleted playlists from my iphone4 that I wish to restore. The current back up does not contain them either. Can I use a back up from yesterday? How do I find it on my laptop?

    No iTunes content is included in any iPhone backup. If the playlists are not in your iTunes library, on your computer, they are gone.

  • Argument error; the number of columns does not equal the number of parameters.

    I am using the Database Toolkit (Enterprise Connectivity) to check for a network connection and then send information from a local database to a SQL database on the network if needed.  In development of the code I continue to receive Error 1 and the Possible Reason(s) is "Argument error; the number of columns does not equal the number of parameters."  I am using the DBToolsSelectData.VI to retrieve data from the local MDB file and the DBToolsInsertData.VI to write it to the SQL file.  The collection of the data from the MDB file is successful and the connection and validation of the table and columns in the SQL file is also successful.  The error occurs when the Insert VI tries to build the query.  The number of columns being written (attempted) does match the number of columns in the data, they are both 16 string arrays.

    Ok, it's taken a bit, and I have a solution! It took a while to figure out what the DCT is doing, but it seems to be working now.
    The reason for the original error is that you were passing into the insert subVI an array of variants - which the input to the VI coerced into a single variant. You were getting the error because as far as the insert VI was concerned you were only passing it a single data value. The way to get around that was to create a cluster with one element for each column value, convert the cluster to a variant and pass the result to the insert VI - see attachment.
    In terms of the other modifications, I made a copy of the endurance.mdb file, emptied it and used it as the destination for the copy.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
    Attachments:
    NetworkCheck.vi ‏49 KB

  • Error 'The location you entered does not exist or is flagged as inactive.'

    Hi
    In iRecruitment, when Employee Candidate applies for any job, we are getting the error 'The location you entered does not exist or is flagged as inactive.' And it stops employee from applying to any jobs. We are in 11.5.10.2 version.
    Appreciate any pointers on the same.
    Thanks
    Alagappan
    Edited by: user5733015 on Dec 19, 2009 8:35 PM

    Hi Hussein
    Thanks for the update.
    I have gone through all those notes. But, the issue we face here seems to be a peculiar one. First of all, it happens while applying for job (iRecruitment Self Service) and not while creating a contingent worker or creating an employee in the form, as given in the notes.
    Moreover, We haven't had this error either in development nor in test instance. It happened only when we migrated the setups to Production. Moreover, the test and development are nothing but the clone of production at various time intervals. We have tested this on the very latest clone of production (that happened on 15th november) and verified that it doesn't popup there.
    Can you give me some insights 'What could be the actual problem'?
    Considering the solution given in the notes, it talks about 'Setting the default work location for the business group'? Where to set this up?
    Appreciate all your help.
    Thanks
    Alagappan

  • E-mail to the recovery user name does not come

    e-mail to the recovery user name does not come
    what i do?
    I'm sorry for the mistakes i am polish

    The employer should be setting its Macs up with corporate Apple IDs and corporate volume licesnses for the software. Individual employees personal IDs do not provide the Licensed Copy End User License Agreement that the Macs need in a business evironment. Your personal Apple ID only carries a consumer license and by law any of your own apps that you install on the Mac will it is in your control would need to be removed when you turn the Mac back over to the company.
    When a Mac is first set up the original Apple ID is always going to be associated with that Mac, its installed version of OS X and the preinstalled iLife apps. And only that ID can update the iLife apps if they were properly accepted into the Apple ID*. But you should be able to sign out of the active Apple ID in the Store menu of both the iTunes App and the Mac App Store app, then sign into your Apple ID to install any of your own content that you wish to have on the Mac.
    *If the iLife apps were not correctly accepted into the setup Apple ID, then they cannot be updated and no one can buy them again on that Mac with any Apple ID.

  • Invoice created via SUS having error -The template item 1 does not exists

    Hi All,
    We are in SRM6.0 and in our PRD system, we have few invoices created through SUS showing error "The template item 1 does not exist.
    These invoices went into "To be corrected" status and when I hit check it gives me above error message. The message itself don't make much sense to me. Please note we can create new invoice in SRM manually and everything works fine.
    Appreciate any pointers.
    Thanks, Sachin

    We have analysed the issue and found we are getting this error because these invoices are missing with "BE_LOG_SYSTEM" field in table BBP_PDBEI and "BE_REFOBJ_TYPE" field is showing "BUS2201 instead of "BUS2012".
    Any feedback why we have these difference as compare to good invoices (created directly in SRM).
    Thanks, Sachin

Maybe you are looking for

  • CR IX R2 Graphic Location not working with VS 2005

    I have a folder that has a few thousand part images. I created a report in CR IX R2 development and I have an image in my report that changes based on a part number parameter and it works great. If you r-click on an image, choose Format Graphic, clic

  • Error on closing down Itunes

    I get an error everytime I close down itunes and a error report is generated and send to microsoft, can anyone please give me an answer to this problem. Thanks. Dell   Windows XP  

  • Commit after deleting records

    Hi All, I wrote one delete command .This command deletes 20 millions of records.But I want to give "commit" after deleting every 100000 records. How to give "commit" for this requirement. please guide me. Thank you.

  • Differences between the types of DSO's and DTP's

    Hi Friends, 1. pls help me in telling different types of DSO's and their differences? 2. pls help me in telling different types of DTP's and their differences? Thanks in Advance. Jose Reddy

  • Table for production order Activity Quantity

    Hi Experts, Can anybody please tell me the name of table where Production order planned and Actual activity quantity with reference to production order number gets saved ? Thanks in advance. Regards, Bijay