How to fix your iPads speakers, How to fix your iPads speakers
My speakers won't work
The iPad only has one speaker. Is the volume turned up?
Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
Similar Messages
-
How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!
Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy -
What do you do if one of your speakers for the iphone 4s is not working? how yould you fix it?
what do you if one of your speakers is not working on an ipone 4s. how would you fix it?
If you are referring to the speaker at the bottom, there is only one, the other is a microphone. Otherwise, have you attempted a reset?
Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure. -
My iPad speakers doesn't work whit some apps, but works ok with my iPod app. How can I fix it?
My iPad speakers doesn't work with some apps, but works ok with my iPod app. The sounds from this apps works ok with earplugs. How can I fix it?
Talking to yourself again ...eh?
-
I can hear sound though my head phones but not though the speakers on my iPad how do I fix it
I can hear sound though my head phones but not though the speakers on my iPad how do I fix it
Or ... If you can hear music in the Music app without the headphones, you may have system sounds muted.
If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085 -
What does it mean if your IPad says that it has been "disabled?" How to I fix it and is it serious?
What does it mean when an IPad says it has been "disabled?" How do I get it to work again, etc.? Is this an indication of some kind of damage to device and how would it happen?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Hi,
My iPad has just stopped working with sound from the speakers, it works fine with the headphones in. The soft mute button is not made and the volume is at max.
Any ideas what problem is and how to sort. ThanksSystem sounds can be muted from the software switch in the task bar as well as from the side switch depending on how you have it set up. This my boilerplate resonse for sound issues.
1. If you have no sound at all, even in the Music App, try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
2. If you lost sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
3. If you still have no sound at all - except when using headphones ....try cleaning the dock connector opening of the iPad with a soft brush and just a little bit of rubbing alcohol. -
So, I have a macbook pro. I used earphones to listen to music and everything worked fine. A few hours later, after it had been unplugged, I tried to listen to a video and the sound did not work. I have tried everything. Rebooted my computer multiple times, reset the PRAM twice, and checked my MIDI setup. When I go to sound through system preferces, this is what shows up: Output -- Digital out -- optical digital-out port and there is no option for external speakers! It isn't even showing that I have them!!! My internal settings are fine. HELP please!
This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host > -
Help!!!
Hi dshohat,
Welcome to the HP Support Forums. I see that you are unable to access the apps found on the front panel of your Officejet Pro 8600 Plus printer.
I have included the Troubleshooting Print App Issues document. One of the FAQs is “Print Apps launch slowly, lock up, crash, or a connection error message displays on the printer”. It has a series of trouble shooting steps to take to resolve this.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
Sound Problems on iPad: how to fix, easy [video]
Hi dear iPad user,
Most people will, eventually, have sound problems: the cause can be complex as a 'miss-behaved' app that messes the sound engine or as simple as the iPad being forgotten on Mute/Volume Down.
I used to help family and friends to fix their iPads' sound problems by sending them 'text' instruction steps... lots of times they ended up calling me on the phone...
So I made a video (short: 1m40s):
https://www.youtube.com/watch?v=FjBP-Ncj_fE
It shows:
how to unmute the sound (even if the side-switch locks the rotation of the screen)
how to put volume up
how to close all the apps (in the case there is an App messing with the sound system)
how to reboot the iPad (ultimatelly fixes hard cases of messed sound system)
What it won't fix: if you have a hardware problem...
If you do all the steps and you get NO SOUND AT ALL, please, try also checking if you car listen sounds using a HEADPHONE (you know are working conditions). If you can listen to sounds in the headphone but no sound at all in the iPad's built in speaker, well, there might be a hardware problem and you should look for help on an Apple Retail Store or other official technical support available at your location.
Hope this helps!
Everson.UPDATE: fixing iPad Sound after iOS 7
http://youtu.be/SDf1LDcE95Q
(1min 36sec)
It covers the basics:
checking side-switch / mute / "Control Center"
volume all up
...and also the worst cases:
closing all apps (for rare cases when a single app might render the sound system instable)
rebooting the iPad
So, don't get desparete: try the things in the video.
There are people who reported having forgotten an audio-bluetooth connection activated with a turned-off sound-system or speakers... or forgot Air-Play turned on... so be sure you disengage bluetooth and/or airplay.
On the 'hardware side', dirty dock connector (30 pin) can make the iPad 'think' it is connected to external audio - if so, cleaning it with a dry toothbrush can fix. Also, moisture in the headphones connector can make the iPad switch to 'headphones' even without headphones connected, making it silent: check if you can hear things with headphones plugged in - if so, try gently inserting and removing headphones a few times and check if you get sound back to iPad's speakers alone.
Good luck to everybody! Audio problems are quite common - fontunately they are easy to fix. -
i wanted to know how much is the iPad 2 battery, speakers, LCD, the charging port, and the volume button to fix at apple store.
Apple does not fix devices. If there is something wrong with the device and it is out of warranty, then they replace the device with a refurbished device. The cost depends on your location, but you can start by looking here. http://www.apple.com/support/ipad/repair/
-
How can you get your i pod touch screen fixed
How can you get your screen on an i pod fixed
Apple will exchange your iPod for a refurbished one for $199 for the 64 GB one and $99 for the others. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
Someboby please help me.....THIS IS DOING MY HEAD IN!! I have had to reset my Ipad as my apple Id has been disabled which reset fine but after the reset I have gone to download an app it was automatically disabled again. Any ideas on why this is happening or how I can fix it would be awesome.
Apple ID being disabled is a different error, and one not related to your iPad.
Read: http://support.apple.com/kb/ts2446
Hope this helps -
My Facebook App crashes everytime I open it on my IPAD 2. How do you fix that?
I have reset my IPad 2 several times. Reloaded the most current IOS for the IPAD and Facebook. Facebook still crashes everytime I open it. I had the same problem on my Iphone 4 but reverted to the previous Facebook version and it works. I tried that on my Ipad but it doesn't work. Any one know how to fix this? Facebook won't respond at all when I submit the problem to them.
Here's a few things I try when an app misbehaves and crashes.
1. Quit the app and restart it like this: Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it work like normal.
2. If the first suggestion did not work try quitting the app again but instead of restarting it right away, reset your device like this: Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. Ten restart the app and see if it works.
3. If neither of the previous suggestions worked I suggest deleting the app by tapping and holding on the app until it jiggles and displays a Rex X. Tap the X and confirm that you want to delete the app. Then reset your device. After the device has restarted go to the App Store and download Facebook again.
If all these fail you might just have to search for an alternative app until Facebook fixes the problem. -
Internal speakers are not working, they're not showing up at all. Does anyone know how to fix this?
My computer's speakers are not putting out sound. They worked fine yesterday, and I just now started up my computer and began using it today. The internal speakers don't show up on my list of output devices in settings, and I can't adjust the volume. Any help is really appreciated!!!
They are all in the same folder and it says all images are there, but it is only showing 1 card's images at a time. Does anyone know how to fix this?
This is kind of confusing, on the one hand you say "it says all images are there" and then you directly contradict this by saying "it is only showing 1 card's images at a time".
Could you explain in a lot more detail what you see (and don't say "it", say exactly what part of Lightroom or what part of your operating system you are looking at), or show us a screen capture?
Maybe you are looking for
-
I tried to reset my settings in my iPhone 4 and now it won't restore my iPhone. I tried connecting it to iTunes and it won't work. How can I fix this?
-
Hi Community, I have made some modifications myself to the EEM. Can someone please take a look at the following IP SLA - EEM combination and let me know why it won't work? ip sla 102 icmp-echo 180.80.8.4 source-ip 180.80.8.3 request-data-size 24 tos
-
Is there anyway to retrieve bookmarks after updating software?
I upgraded my software and lost my bookmarks is there anyway I can retrieve them?
-
Page Navigation view/editor Bug?
So if I have a lot of navigation components on a page (links and buttons, including several tables with page buttons on them) and I am in the Page Navigation view, there are a bunch that are off the bottom of the page when I want to click-and-grunt (
-
Hi, Because of the limitation of the form field help text I've tried to put my function in parts into many form fields, but it always brings me an error. When i put it into a XSL file and import it, it's working fine. How do I create my function in t