How to fix your iphone constantly switching read emails to unread, how to fix your iphone constantly switching read emails to unread
So scrolling through other forums this issue was posed in september, and apple was apparently fixing it. I haven't had a problem with my email switching read emails to unread and sending 1600 "unread" messages to my phone until today. I updated to IOS7 when it came out which was weeks ago, and haven't had an available update. I have tried all posted "solutions" and nothing works. Any other suggestions? or time when this bug will be fixed?
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
Similar Messages
-
my iphone offers no "SEND" button when I'm reading regular inbound email and I want to respond or forward...something got switched off and I don't know how to fix it...
Close out of the mail app, then double tap the home button and completely close out of the app.
Then do a reset, no data loss. Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then check your email again. -
basically yeah, I updated my software because it said that iOS 7.0.1 was out as a bug fixes update and now my phone constantly glitches the **** out, its super slow, and it pretty much created more bugs than it did fix them. So how can I go back to iOS 7? because 7.0.1 is an absolute nightmare.
Try updating to iOS 7.0.2.
Does your iPhone still have performance issues? Have you tried the basics? -
Trying to update apps on iphone 4 window tells me need to switch from UK store to US store how do I fix??
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you will be located.
8. Tap "Done". -
I dropped my iPhone 5c and it wont turn on but its constantly vibrating. I have tried holding the home and lock screen for a long time but nothing has happened. How can I fix this?
You make an appointment at the genius bar of your local Apple Store and get it serviced/replaced. You broke it. If you can't even force a reboot, there's nothing much more you can do.
-
My profile pictures for my contacts somehow got switched on my iphone 4. The pictures are correct on icloud where I sync. Does anyone know what the problem is and how I can fix?
Try resetting your iPhone. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
On a separate point, you may wish to consider updating your iPhone if you're still on iOS 5.0.1 as your post says. -
Hi my iPhone 5 constantly switches from silent to ringer and back again by itself. I've updated the software but its still doing it. Any ideas how to fix it? Thanks!
Have you tried resetting it by holding the sleep/wake button and the home button until it restarts?
-
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
How can you keep your iPhone 4 (using it as my car's iPod) staying on the Audible app? When I leave the car and return to continue hearing a book, it has switched to iTunes.
The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone. -
I have problems syncing my new iPhone 5 to iTunes. I read somewhere to disable iPhotos and that has allowed me to sync but my photos are not on my iPhone. How can I fix this?
Try updating to iPhoto 9.4.1. If it's not appearing in your Software Update yet, try updating using a .dmg installer downloaded from the following page on the Apple website:
iPhoto 9.4.1
From the release notes for the new version:
What's New in Version 9.4.1
Improves the reliability of syncing to iOS devices via iTunes
Fixes an issue that could cause iPhoto to quit unexpectedly when using the Export command
Addresses an issue that could cause iPhoto to quit unexpectedly when upgrading multiple books, cards, and calendars
Resolves an issue with downloading and viewing photos synced from Facebook albums -
Hi, I upgraded my iphone 4 (4.3.3) to iso 5 beta 6, but now it shows "No Service" at top left, and unable to complete your activation. Also tells that "this device is not registered as part of the iphone developer programme." How could I fix this problem? Please help me...,
I had a similar occurrence with my just activated iPhone 4.
I had been using the phone for three days when an odd occurrence with voice mail caused me to call tech support. After some discussion they decided to push the activation to my phone (even though I had been using it for three days). When I went to power it back up again I repeatedly got the "no service" notification. I got tech support on a land line and we tried hard reboots and so on. No joy. They told me to take it in to the point of sale and either the SIM card or the phone needed (or both) needed replacing.
I tried one last hard reboot after dinner and the phone came up with service, but I took it in to the point of sale in the morning and they swapped the SIM card out and I went to a Genius Bar appointment to get the phone checked out. It is supposedly OK, but I am still having some problems when syncing it so I will have to visit the Genius Bar again tomorrow about that. At least I have not experienced the "no service" problem in the roughly 24 hours since the SIM card was replaced. (Fingers crossed) -
I restored my pc and now it won't open itunes, when i try to, it reads " this version of itunes has not been correctly localized for this language. please run the english version." how do i fix this so i can open my itunes and back up my iphone?
Hey KEBENNETT,
It sounds like you've restored Windows on your PC and iTunes is no longer opening and running normally.
I'd recommend using the instructions found at step 4 and 5 in this article to repair or remove/reinstall your iTunes installation:
Issues installing iTunes for Windows - Apple Support
All the best,
Jeremy -
I am trying to update my iphone to the latest software version, but am getting a message saying 'make sure your network settings are correction and your connection is active'. i know my connection is active, so how can I fix this problem?
Hi there pamela123456,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
-Griff W. -
when I go to "settings" on my iPhone 5 and hit the "Bluetooth" tab, the circular icon next to "Devices" is constantly spinning, ans now I can't get the phone to sync with the bluetooth in my car, etc.
Any ideas on how I can correct this?unpair your phone from your car, then do a re-pair.
-
does anyone know why my iphone keeps switching all of my alert tones and ringtones assigned to contacts? i restored it and it still keeps doing it and now when ever i get a txt or a phone call the tones just sound terrible. how do i fix this?
Your only chance is setting it up as new device without using the latest backup afterwards, which you already did.
If this does not work, you should get it serviced:
Apple - Support - Service Answer Center
How to back up your data and set up as a new device
Maybe you are looking for
-
Part of the screen failing!
I have a big problem! I noticed that part of the screen is not accepting touch. It is a small strip along where the google tool bar is. This is a little anoying, I am also unable to press the d key when I am in wide screen using the key board. I also
-
Domain name showing instead of DisplayName (DN Error)
Hi For a portion of our users, myself included the Domain\UserName shows in sharepoint but for the majority of users it shows the display name fine. I've done a full user profile synch today and also restarted the Forefront Identity Manager Service &
-
I am seeking advice or assistance simply setting up a game-plan for using this software. For years I've simply organized .jpg photos directly into a series of subsetted folders on my harddrive. I recently decided to try once again to get the hang of
-
Restore Oracle Backup into New Oracle Database
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production PL/SQL Release 9.2.0.7.0 - Production CORE 9.2.0.7.0 Production TNS for HPUX: Version 9.2.0.7.0 - Production NLSRTL Version 9.2.0.7.0 - Production I need the steps on how to restore a b
-
ORA-1652: unable to extend temp
Hi, We faced a problem with one of r billing process which normally takes 25-30 min was running for over 5 hrs and in the end gave a rollback error....when the process was re-started it got completed in 35 min.... Tue Jan 1 22:48:33 2008 ORA-1652: un