How to flash using CD-ROM?

This current BETA BIOS I tried screwed me over and won't letme use WinFlash.exe 1.51 to flash my BIOS to previous working version. It also disabled my FLOPPY DRIVE!
So, is there any way to flash back to previous version using a CD-R?

Hi mate,
Go the the following site http://www.nu2.nu/bootcd/ and looking for the "Clean Bootable CD-Rom (for BIOS upgrade) [updated! may 6, 2005]" section. That's the thing you need, of course, together with your Bios. It has detailed description with it. You will be fine. I use this method every time since I don't have a floppy drive at all.

Similar Messages

How does Flash use the microphone?

I'm a long-time Windows driver developer. I'm trying to get Flash to use my virtual webcam/microphone as the current webcam on Windows XP or Windows 7 (identical results). I started out with a DirectShow source filter with two pins (video and audio), but Flash did not see an audio source at all, even though Amcap worked just fine. I then tried making two separate source filters (one with an audio pin, one with a video pin). Again, Amcap is happy but Flash does not see an audio source.
After some debugging, I noticed that it was enumerating the waveIn devices. So, I wrote an old-style waveIn driver for the audio. Flash now negotiates an audio format, but it never initiates streaming. If I bring up the "Options" dialog and go to the microphone tab, then Flash DOES start streaming, presuambly to get information for the VU meter, but as soon as I dismiss the dialog, the streaming stops.
How can I find out what exactly Flash wants? The whole process is frustratingly opaque.
Tim Roberts, [email address removed]
Providenza & Boekelheide, Inc.

Moved to Using Flash Player.

How to Flash ROMS/Load CWM on a rooted WT19i

Hi.I own an SE LWW and I have rooted it by following Nabeel's tutorial.
I can confirm that my Cell is rooted as i can use Titanium Backup, and I have the SUPERUSER app.
I have an UNLOCKED BOOTLOADER
After rooting I tried acessing the CWM recovery by Rebooting in recovery..I have tried every key combo out there during rebooting but the phone wont boot in the RECOVERY MODE.
Using REBOOT IN RECOVERY in ROM manager leads to a normal reboot.
I guess CWM isn't installed in my MOBILE.
So i have no IDEA how I can install CUSTOM ROMS.
Can anyone also explain
1) how to make A Nandroid backup (I have backed up system apps using titanium backup..is it the same? )
2) A process for flasing ROMs
3)What is and How to flash kernels ?
Thankyou.

Thread moved to correct sub forum.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How do I use Brige Web Gallery in a Flash website

How do you use the output of a Brige Web Gallery for use inside of a Flash Website?

Hi there -
I'd try posting your question over in the Flash general forum. You could also try the Flash site design forum. The folks over there will probably be able to help you solve your issue

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

In my Apple Macbook Air, most of the USB Flash/Thumb Drives are not shown in the Finder Window. Only a few Brands of USB /Flash Thumb Drives are shown or compatible or shown in the Finder. How do I use any Flash/Thumb Drive with my Apple MacAir?

Yes, junker thumb drives pour like rain in the market.
Which makes are working on your Air, and which arent?
Stick to Sandisk and a couple of other reliable mfg. of memory sticks

How can I use my Zen Xtra like a flash memory

Hello, I want to know how can I use my MP3 player like a flash memory.
I have one and if I conect it with other computers I can't transfer documents and with a flash memory I conect it in all the computers with Windows XP and all of they detect the flash memory and they can transfer documents.
With my Zen Xtra I connect it and the computer detects it but I can't transfer anything because the computer doesn't have the software.
My question is.. Do I have to install the software in all the computers that I use ? or there are other forms to conects PC and MP3 Player? ( I want to transfer documents like text, image, etc)

But some MP3 players do that, why this one can't be connected with all the computers ?
Message Edited by morfo on 0-22-2005 05:54 PM

How do i use ipod as flash drive?

I plugged my IPOD and opened iTunes. "Manually manage music and videos" is already checked, "Enable disk use" is also checked but greyed. However, IPOD does not appear in My Computer. I would uncheck "Manually manage music and videos" but if I do then I would lose most of my songs. How can I use my IPOD as flash drive?
IPOD 30G

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
Microsoft Support - A computer that is running Windows XP cannot detect a USB thumb drive, an Apple iPod, or an external hard disk drive

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

How can I use adobe flash player on iPad2

How can I use adobe flash player on iPad 2?

You cannot. Adobe does not make it for ipad.
This has been discussed over and over and over and over and over and over again on these forums. Please do a forums search - right side of this page.
There is no need to add yet another thread on this very tired subject.
Adobe has announces d that they are selling a platforms that will allow ipad users to view flash content. This is nothing that users will have. The developer of the video will have to do this.

How can i use flash player on my ipad?

How can i use flash player on my ipad?

Install Flash Player on your PC. Install remote access software on a PC and your iPad and then you are good to go.

TS1702 how do i use microsoft word on my ipad? i cannot use flash on it as well neither do i use it with projector for presentation.

how can i use microsoft office on my ipad? i can't also use flash to copy and transfer documents into it and neither could i use it with a projector for presentation.

You can't use MS Office on the iPad as Microsoft haven't made app versions of their programs (you can only use apps that are in the iTunes app store on your computer and the App Store app on the iPad), but there are apps that support word, excel and powerpoint documents. The options include Apple's Pages app for Word documents, Numbers for Excel spreadsheets and Keynote for Powerpoint. And from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD.
As to how you then get the file to your chosen app will depend upon what the app supports - different apps will have different ways of copying their content to/from a computer e.g. via the file sharing section at the bottom of the device's apps tab when connected to your computer's iTunes, via wifi, email, dropbox etc

How can I use Flash_Slideshow.SWF in my Flash CS4 document?

Hi,
I have downloaded a nice Flash Slide show file (.SWF) and would like to use in my Flash CS4 document without any modification (as it is). How can I use it? There is no .Fla file this Slide Show. It just works using xml file.
Please do help.

Hi,
You need to load a .swf file in your flash document using the loader class. I'm assuming you are using the AS3. Please click on the below link which helps you to use the loader class.
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/display/Loader.html
Thanks

I need help with my Mac OSX 10.5.8. How can I use and install Flash Player 11.7?

From one to another day it wasn't possible to watch videos from certain TV channels in my browser (Firefox, but I think it doesn't matter).
I have Mac OSX 10.5.8 and don't know how I can use Flashplayer 11.7. Do I have to upgrade to Mac OSX 10.6? Does it really work then?
Or is the technical progress so fast, that if I upgrade to 10.6, they invent a new Flashplayer and I can't use it anymore? Do I have to upgrade maybe even to Mac OSX 10.7 and then OSX 10.8? I am confused...
It is really unfair, that a 5 year old laptop is too old to use normal equipement!
Can someone help me and tell me if my assumption is right?
Thank you very much!
Snootsy

Is this a PowerPC? See
What version of Flash Player should I use with my Power PC based Mac?

How do I make Flash use the original Photoshop file, not a .png one?

Hi, this might be kind of a basic question/problem but I can't seem get Google to help me. Since I've recently started out with Flash, I guess I just missed some newbie thing out, still very greatful for help though, since this'll soon be causing a brain hemorrage...
Ok, here goes:
I'd like to draw key frames in Flash, just simple drawings/skelettons using the pen tool, basically to create the movement itself. After that, I want to export the frames that I drew as images to Photoshop in order to apply texture and colour, and then put them back into Flash again, without tampering with the Flash doc I've already created, since the animation is already done. I want the file(s) that I'm working with to remain the same files throughout the process, from Flash to Photoshop and back to Flash again, like the way InDesign works. Is this even possible?
If this isn't possible at all, I guess the alternative is to draw in Photoshop and then import the drawings into Flash, put them in order and then make any eventual changes after you've created the animation in Flash, this is less smooth though still possible. But here emerges (sort of) the same problem:
When I import images from Photoshop, create animation out of them, and then realize I have to make some changes in the original PS pic file I head back to PS to correct it. But it just doesn't work the way I want it to... If I modify the pic file in PS, then use the "update" alternative in Flash Library, Flash just tells me that the file can't be found, and does not update the image. If I choose the "edit in PS"-alternative from right clicking on a symbol that is in the library, the file opens as a .png file in PS, not as my original file! It seems to me that Flash is creating its own library, not using the existing document. Is there anyway to go around this? How do I make Flash use my PS file which allows me to change it as much as I want (as with InDesign)?
This is driving me crazy, what I'm working on is supposed to be full HD, I can't use a freaking .png file... Gah!
Very many Thanks in advance!
(If anyone has any suggestion for alternative software, that's also very welcome!)

If you start the artwork in Flash, you are starting with a vector drawing. If you export this art as a .png so that you can edit it in Photoshop, you will be translating the artwork to a bitmap image at a specific resolution. When you edit this .png in Photoshop, you can save it, as a .png, and then import that .png into Flash.
After you import the .png, place it on the stage in a new layer. Position the new artwork over the old artwork. Then throw away the original artwork. Now, when you want to edit the artwork, go to the original file in the movie's Library and select Edit with Photoshop. When you save the file in Photoshop, the updated file will appear in the Flash movie.
If you have Illustrator, you can export your original artwork as an Illustrator file. Then you can open this file in Illustrator, edit it, and save it. Then, as above, import the .ai file into Flash and toss out the original. Now you can edit the original file through the Library in your Flash movie.
Alternately, you could start by creating the artwork in either Photoshop or Illustrator. Then import that art into Flash. Now you have a link to the editor for either file in your Library. This may simplify things.
Working with Photoshop and/or .png files will give you a larger finished file than working with Illustrator files. In either case the finished resolution of the Flash movie will be the computer's screen resolution, 72 ppi.

How do I use Adobe flash player on iPad

How do I use Adobe flash player on iPad

William ~ Welcome to the Support Communities. These related articles may be of interest:
http://www.apple.com/hotnews/thoughts-on-flash/
http://blogs.adobe.com/conversations/2011/11/flash-focus.html

How to flash using CD-ROM?

Similar Messages

Maybe you are looking for