How to flatten an array splice?

var foo:Array = [1, 2, 3 ];
var bar:Array = [9,10 ];
foo.splice(2, 0, bar) == [1,2,[9,10],3]
How can i splice in bar so i get a single flat result
[1,2,9,10,3]?
I know i could loop over bar and splice in each individual
member into foo, but is there a more efficient option?
Thank you.

I'm not sure if this is more execution-time efficient, but
code-wise it's more succinct.
foo.splice.apply(foo, [2, 0].concat(bar));

Similar Messages

How does flatten to string work with arrays?

Hi all,
I'm currently trying to get my head around how flatten to string works in terms of using it to write a configuration file which is loaded on startup in my VI. Writing and loading the configuration file is no problem and it is working beautifully. However... this is for a data acquisition system and the configuration file stores all the calibration data in the system which is entered through arrays. Anyway, the data recorded by my VI is to be post processed using MATLAB and needs to apply the calibration data stored in the configuration file.
So I've been trying to work out how to get MATLAB to decypher the configuration file, but... I can't make heads or tails as to how the data is written into the file. I made a mock up of the saving file routine as you can see below, and run it a number of times by changing the input array dimensions and the values.
Then opened the saved file to see if I can find a pattern... but I can't! Simply changing the element values changes the number of "\   \'s" Here is what I produced from my trials:
[1x1 0]
Config=\00\00\00\01\00\00\00\00\00\00\00\00      (1x1 array of 0's)
[1x1 1]
Config=\00\00\00\01?ð\00\00\00\00\00\00            (1x1 array of 1's)
[1x1 2]
Config=\00\00\00\01@\00\00\00\00\00\00\00       (1x1 array of 2's)
[1x2 0]
Config=\00\00\00\02\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00      (1x2 array of 0's)
[1x2 1]
Config=\00\00\00\02?ð\00\00\00\00\00\00?ð\00\00\00\00\00\00                  (1x2 array of 1's)
[1x2 2]
Config=\00\00\00\02?ð\00\00\00\00\00\00?ð\00\00\00\00\00\00                  (1x2 array of 2's) etc. etc. etc
[2x2 0]
Config=\00\00\00\02\00\00\00\02\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00
[2x2 1]
Config=\00\00\00\02\00\00\00\02?ð\00\00\00\00\00\00?ð\00\00\00\00\00\00?ð\00\00\00\00\00\00?ð\00\00\00\00\00\00
[2x2 2]
Config=\00\00\00\02\00\00\00\02@\00\00\00\00\00\00\00@\00\00\00\00\00\00\00@\00\00\00\00\00\00\00@\00\00\00\00\00\00\00
Could someone explain to me how flatten to string flattens the array information? Particularly when the array elements are double precision? I look forward to any help that anyone can offer!
Thanks,
Stirling
Message Edited by stirlsilver on 09-08-2007 08:47 AM
Attachments:
saveconfig.png ‏7 KB

There are optional inputs to "flatten to string" That you can use to modify the outcome as needed. For example you can do little endian.
You can also omit the array size from the flattened data (definitely not recommended for 2D arrays).
LabVIEW Champion . Do more with less code and in less time .

Flattening an array

I know how to flatten the sdo_ordinates array...
select *
from table (
select a.geo.sdo_ordinates
from states a
where a.state = 'California');
But we now have a need to be able to flatten the
sdo_ordinate array so that we can access the ordinates
in a more natural form as the X and Y elements of a 2D
geometry.
I know this is wrong but something like...
select X, Y
from table (
select a.geo.sdo_ordinates
from states a
where a.state = 'California');
The preferred method for doing this is via a view.
I am on 8.1.7.4 so any approach needs to keep this in mind.
Any suggestions?
S.

Dan,
8.1.7.4 was more picky and needed a CAST() to make it work.
The version I implemented (+ the view) is as follows:
==========================================
DEFINE defaultSchema = 'GIS'
CREATE OR REPLACE TYPE &defaultSchema..Coord2DType AS OBJECT (
x number,
y number );
show errors
grant execute on &defaultSchema..Coord2DType to public with grant option;
create or replace type Coord2DSetType
as table of &defaultSchema..Coord2DType
grant execute on &defaultSchema..Coord2DSetType to public with grant option;
drop function GetCoord2D;
create or replace function GetCoord2D (p_shape in mdsys.sdo_geometry)
return &defaultSchema..Coord2DSetType deterministic
is
v_shape mdsys.sdo_geometry := p_shape;
i number := 1;
coords &defaultSchema..Coord2DSetType := Coord2DSetType();
coordOffset number;
begin
while i < v_shape.sdo_ordinates.count
loop
coordOffset := (i+1)/2;
coords.extend;
coords(coordOffset) := &defaultSchema..Coord2DType(null,null);
coords(coordOffset).x := v_shape.sdo_ordinates(i);
coords(coordOffset).y := v_shape.sdo_ordinates(i+1);
i := i + 2;
end loop;
return coords;
end;
grant execute on &defaultSchema..GetCoord2D to public with grant option;
select shape from propright.pr_a where rownum = 1;
show errors
DECLARE
coords &defaultSchema..Coord2DSetType := Coord2DSetType();
v_shape mdsys.sdo_geometry;
BEGIN
select shape into v_shape from propright.pr_a where rownum = 1;
coords := GetCoord2D(v_shape);
END;
select rownum,coords.*
from propright.pr_a a, table(CAST(GetCoord2D(shape) AS Coord2DSetType)) coords
where a.pr_id = 14353;
The view is:
create or replace view pr_p
as
select property_right_id as pr_id, mdsys.sdo_geometry(2001,NULL,MDSYS.SDO_POINT_TYPE(coords.x,coords.y,NULL),NULL,NULL) as shape
from propright.property_right a, table(CAST(gis.GetCoord2D(a.shape) AS gis.Coord2DSetType)) coords;
==========================================
I now use the view to export data to a shapefile. So
now we can export the polygon as a polygon or as
a point shapefile! (Believe it or not this is a legal
requirement that we have to meet.)
Thanks mate,
S.

How to map an array to fixed fields using Biztalk mapper

I need to remap an array of objects like this:
<Root>
<ListOfObjs>
<Obj>
<Attr1>0000</Attr1>
<Attr2>Hello!</Attr2>
</Obj>
<Obj>
<Attr1>1111</Attr1>
<Attr2>Hello1!</Attr2>
</Obj>
</ListOfObjs>
</Root>
in an output like this:
<Root>
<Obj1_Attr1>0000</Obj1_Attr1>
<Obj1_Attr2>Hello!</Obj1_Attr2>
<Obj2_Attr1>1111</Obj2_Attr1>
<Obj2_Attr2>Hello1!</Obj2_Attr2>
</Root>
So in my XSD schema I have something like this:
Schema Input
<xs:element name="Root">
<xs:complexType>
<xs:sequence>
<xs:element name="ListOfObjs">
<xs:complexType>
<xs:sequence>
<xs:element name="Obj">
<xs:complexType>
<xs:sequence>
<xs:element name="Attr1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Attr2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
Schema output
<xs:element name="Root">
<xs:complexType>
<xs:sequence>
<xs:element name="Obj1_Attr1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Obj1_Attr2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Obj2_Attr1">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="Obj2_Attr2">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:minLength value="1"/>
<xs:maxLength value="50"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
In addiction I have to evaluate every single value because when I found some conditions (like if value=0000 output should be NULL).
What would be the best way to do it? I'm thinking to develop a custom functoid but I'm not sure it would be the best way, probably it could be done even using XSLT inline transforms, can you point me in the best direction?
Thank you

Hi,
You cannot directly map an array output to any single field in BizTalk mapper.
Couple of options :
1) create
the Xslt or inline C# code
Refer:
http://seroter.wordpress.com/2008/10/07/splitting-delimited-values-in-biztalk-maps/
2) Shankycheil has
provided a solution to similar requirement in the below link, u can also refer that.
https://social.msdn.microsoft.com/Forums/en-US/55ec472d-4f34-4057-b1c6-0e50740f0f6e/how-to-itterate-string-array-values-in-biztalk-mapper?forum=biztalkgeneral
Rachit
Thank you, I already seen both posts, but I'm not sure they are what I need or I can't understand well how to use them.
Speaking about the first solution, as I told before, in the example I should have an array already formed and delimited by a char (something like "obj1attr1-obj1attr2-ob2attr1-obj2attr2". In this situation probably this example could be a good
point to start from, but how to transform my complex input object in a similar formatted string?
About the second I don't understand well what is the working solution that they have adopted. Is the 4 steps solution suggested by Shankycheil? If yes, how can I loop between all array elements and extract all their values?

How to build a array with high sampling rates 1K

Hi All:
Now I am trying to develop a project with CRio.
But I am not sure how to build a array with high sampling rates signal, like >1K. (Sigle-point data)
Before, I would like to use "Build Arrary" and "Shift Register" to build a arrary, but I found it is not working for high sampling rates.
Is there anyother good way to build a data arrary for high sampling rates??
Thanks
Attachments:
Building_Array_high_rates.JPG ‏120 KB

Can't give a sample of the FPGA right now but here is a sample bit of RT code I recently used. I am acquiring data at 51,200 samples every second. I put the data in a FIFO on the FPGA side, then I read from that FIFO on the RT side and insert the data into a pre-initialized array using "Replace Array subset" NOT "Insert into array". I keep a count of the data I have read/inserted, and once I am at 51,200 samples, I know I have 1 full second of data. At this point, I add it to a queue which sends it to another loop to be processed. Also, I don't use the new index terminal in my subVI because I know I am always adding 6400 elements so I can just multiply my counter by 6400, but if you use the method described further down below , you will want to use the "new index" to return a value because you may not always read the same number of elements using that method.
The reason I use a timeout of 0 and a wait until next ms multiple is because if you use a timeout wired to the FIFO read node, it spins a loop in the background that polls for data, which rails your processor. Depending on what type of acquisition you are doing, you can also use the method of reading 0 elements, then using the "elements remaining" variable, to wire up another node as is shown below. This was not an option for me because of my programs architecture and needing chunks of 1 second data. Had I used this method it would have overcomplicated things if I read more elements then I had available in my 51,200 buffer.
Let me knwo if you have more qeustions
CLA, LabVIEW Versions 2010-2013
Attachments:
RT.PNG ‏36 KB
FIFO read.PNG ‏4 KB

How to set an array element in an object type of array??

Hi,
I have set attribute as follow:
Color[] colors;
Color[] colors = new Color[20];
colors[0] = "Red";
colors[1] = "blue";I can't compile this code. It said:
"Incompatible type -found java.lang.String but expected Colors
Could you tell me how to set an array elements when the array type is an object?

in your case, the array shouldn't be Color[] but String[] since you re intending to put strings into it
by the way, you could also use a hashmap to map a string to a color:
HashMap<String, Color> hm = new HashMap<String, Color>();
hm.put("Red", Color.RED);
hm.put("Blue", Color.BLUE);
etc.

How to add byte[] array based Image to the SQL Server without using parameter

how to add byte[] array based Image to the SQL Server without using parameter.I have a column in table with the type image in sql and i want to add image array to the sql image column like below:
I want to add image (RESIM) to the procedur like shown above but sql accepts byte[] RESIMI like System.Drowing. I whant that sql accepts byte [] array like sql image type
not using cmd.ParametersAdd() method
here is Isle() method content

SQL Server binary constants use a hexadecimal format:
https://msdn.microsoft.com/en-us/library/ms179899.aspx
You'll have to build that string from a byte array yourself:
byte[] bytes = ...
StringBuilder builder = new StringBuilder("0x", 2 + bytes.Length * 2);
foreach (var b in bytes)
builder.Append(b.ToString("X2"));
string binhex = builder.ToString();
That said, what you're trying to do - not using parameters - is the wrong thing to do. Not only it is insecure due to the risk of SQL injection but in the case of binary data is also inefficient since these hex strings are larger than the original byte[]
data.

How to get byte array from jpg in resource for Image XObject?

Hi,
Does anyone know how to get an array of bytes from a jpg from resource without an external library except MFC?
The array of bytes is needed to create an Image XObject so it can be included in an appearance for an annotation.

Sounds like a standard Windows programming question, not specific to the SDK.

How to list an array of objects using struts in jsp and ActionForm

I am using the struts ActionForm and need to know how to display an Array of objects. I am assuming it would look like this in the ActionForm:
private AddRmvParts addRmv[];
But I am not sure how the getter and setter in the ActionForm should look. Should it be a Collection or an Iterator?
I am thinking I need to use an iterator in the jsp page to display it.
I am also wondering if the AddRmvParts class I have can be the same class that gets populated by the retrieval of data from the database. This class has 10 fields that need to display on the jsp page in 1 row and then multiple rows of these 10 fields.
Thanks.

Most probably the easiest way to make it accessible in your page is as a collection.
ie
public Collection getAddRmvParts()
You can use the <logic:iterate> or a <c:forEach>(JSTL) tag to loop through the collection
As long as the individual items in the collection provide get/set methods you can access them with the dot syntax:
Example using JSTL:
<c:forEach var="addRmvPart" items="${addRmvParts}">
<c:out value="${addRmvPart.id} ${addRmvPart.name} ${addRmvPart.description}"/>
</c:forEach>

Labview How to specify 1d array of clusters as data types for variant to data

Hi, I'm new to labview. Can anyone tell me how to specify 1d array of clusters as data types for variant to data?

First of all, you should be sure that there is such a data type within the variant; otherwise, you will run into errors.
I recommend you to create the cluster and create a type definition from it. Then drop an array shell from the array palette and drop the cluster type into that array.
Connect that constant to the data type input of the Variant To Data function.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

How to Display string array in jsp page using netui-data:repeater tag ??

hi,
I am trying to display a string array in a table using the netui-data:repeater tag.
I have to use a page flow controller Array(1 Dimensional) to be displayed in the jsp.
Can any one tell me how to print the array in a table of 3rows & 5 columns.
Here is the code on which I am crrently working on.
<netui-data:repeater dataSource="{pageFlow.strWorkObject_Array}">
<netui-data:repeaterHeader>
<table cellpadding="4" border="1" class="tablebody">
</netui-data:repeaterHeader>
<netui-data:repeaterItem>
<tr>
<td><netui:label value="{container.item}" >
</netui:label></td>
<td><netui:label value="{container.item}">
</netui:label></td>
<td><netui:label value="{container.item}">
</netui:label></td>
</tr>
</netui-data:repeaterItem>
<netui-data:repeaterFooter>
</table>
</netui-data:repeaterFooter>
</netui-data:repeater>

weblogic.developer.interest.workshop
Mansoor Naseem wrote:
I would like to know where the pageflow newsgroup is.
These are all the groups in weblogic.developer.interest:
weblogic.developer.interest.60beta.* (5 groups) weblogic.developer.interest.management
weblogic.developer.interest.61beta.* (2 groups) weblogic.developer.interest.misc
weblogic.developer.interest.clustering.* (1 group) weblogic.developer.interest.performance
weblogic.developer.interest.commerce weblogic.developer.interest.personalization
weblogic.developer.interest.ejb.* (3 groups) weblogic.developer.interest.portal
weblogic.developer.interest.environment weblogic.developer.interest.rmi-iiop
weblogic.developer.interest.jdbc weblogic.developer.interest.security
weblogic.developer.interest.jms weblogic.developer.interest.servlet
weblogic.developer.interest.jndi weblogic.developer.interest.tools
weblogic.developer.interest.jsp weblogic.developer.interest.weblogicenterprise
MN

How to create an array using reflection.

How to create an array using reflection.
I want to achive something like this,Object o;
o = (Object)(new TestClass[10]);but by use of reflection.
To create a single object is simple:Object o;
o = Class.forName("TestClass").newInstance();But how do I create an array of objects, when the class of objects is known only by name? (Can't use Object[] because even though an Object[] array can be filled with "TestClass" elements only, it Cannot be casted to a TestClass[] array)
Anybody knows?":-)
Ragnvald Barth
Software enigneer

Found it!
the java.lang.reflect.Array class solves it!
Yes !!!

How to create an array of linklists??? ... plz

Hi guys,
I am trying to create a Hash table. My link list is already working. But i am still confused about how to create any array linklist for solving the collisions. Do i need to create a new instance of the linklist for each array slot? What is the better way to do?
just need some hint to start it.
abdul

Yes, you need to create a new instace for each slot.
LinkedList[] ht = new LinkedList[size];
for(int x = 0; x < size; x++)
ht[x] = new LinkedList();

How to create an array variable

Hi folks,
I'm developing a flowN activity , for each branch created, I need to pass different values (values I get from DB).
For this my plan would be,
-create an array variable , load all the values(from DB) into the array
-pass the array to each branch in flowN activity based on the index
As I'm newbie to BPEL, I do not know how to create an array variable.
Could you people guide me please.
Regards
Viki

Hi,
I created my string array like
<element name="string_array">
<complexType>
<sequence>
<element name="input" type="string" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
</element>
<variable name="arr" element="client:string_array"/>
I am able to add values to my array variable named as "arr"
When I use the following code snippet, it gives my the value of the entire list.
<%ora:getNodeValue(bpws:getVariableData('arr'))%>
But when I try retireve values one by one like <%ora:getElement('arr','/client:string_array/client:input',[0])%>, its giving me error.
Guide to get throu' this.
Viki

How to populate an array with random text files.

I am making a Jeopardy program. I have my program set up so that it retrieves 5 random text files. I just want to know how I populate one array with all the lines from the text files my program is retrieving.

You can read a textfile line by line and add each line to an ArrayList. An ArrayList is very much like an array only that it's "open ended". You can start adding lines without first knowing how many you're going to get. If you still want an ordinary "static" array when you're finished reading lines you can easily get one from the ArrayList and then drop the ArrayList.

How to flatten an array splice?

Similar Messages

Maybe you are looking for