How to focus a range?

Sorry if my english is not perfect!
Is it possible to focus a range, so everything inside that range is 100% focused?
Like the second image, where everything between the red lines would be 100% focused... is that possible? how?
Thank you very much!

You can change the apparent depth of field by adjusting the aperture of the camera in the same way you control the depth of field with a real camera. Depth of field is controlled by the ratio of the distance from the camera the focus point and the aperture. The bigger the aperture the shorter the depth of field. Fortunately AE's camera is not sensitive to light so you can use as small an aperture as you'd like. An aperture value of 0 will put everything in the scene in focus.
There is however, no way of seeing the depth of field as an overlay so you have to just put objects in your 3D scene and adjust the camera position and aperture to get the results you want. AE's camera will essentially mimic a real camera so you can achieve the results you want.

Similar Messages

  • How to make column range based on a column in Oracle BI 11g

    Hello everyone!
    I want to know, how to make column range from a column in oracle bi 11g.
    for example!
    I have a column amounts and I want to build on this with other values of quantity, other column range 1-9,10-49,50-99,100-249, 249 o more.
    regards!
    when I try to make the range I have error.
    Syntax error [nQSError: 26012] . (HY000)
    SQL Issued: SELECT CASE WHEN "CUBO_DEEE_TAB"."CANTIDAD" BETWEEN 1 AND 9 THEN 1 a 9 ELSE "CUBO_DEEE_TAB"."CANTIDAD" END FROM "DM_DEEE"
    Edited by: 964157 on 09-oct-2012 11:50

    You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);

  • How to change the range in numbers?

    how to change the range on graph from .0000 to .0 or .00 and ther range on thr graph from 2's to .5

    Hi,
    Click on Graph Properties icon->Scale Tab -> Click on Vertical axis and specify your range.
    Regards,
    Dpka

  • How to enter a range of ports in the firewall

    Does anyone know the syntax of how to enter a range of ports in the firewall so I don't have to enter each individual number? 
    For instance, to open port 15000 to 15264, is it possible to type something like "15000 - 15264" instead each port followed by a comma?
    Thanks.

    Hi,
    In Tiger it is the same as the comma and dashes thing I listed for some routers.
    You can also click the Edit button in that pic I posted and look at which ports are listed (they will be greyed out on the Preset ones)
    Windows Sharing should list the SMB ports and the Printing ports.
    EDIT:
    Actually on this page where I listed how to set up iChat - SMB is a separate line.
    (Printing sharing may also list the Windows Print Sharing port)
    If those don't cover the Windows app you want to communicate with you will have to make your own Entry Like the Edit link I just inserted)
    10:37 PM      Friday; May 27, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

    hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
    could you tell me how best to set airport express up to extend my wifi range?

    Greetings,
    This is called an "Extended wireless network".
    Read this article for details and steps on how to extend your TimeCapsule's network:
    http://support.apple.com/kb/HT4259
    Cheers.

  • How to transport number range group Configuration in Material Master

    Hi,
    I have this query regarding how to transport number range group in material master from one server to another.
    Problem: There was no number range assignment done for a particular material type. So, i assigned the particular mat. type to a group which had some number range intervals with the help of T-Code MMNR.
    But when i want to transport this config. to other sever, it is only transporting the interval but not the assignment done to that group. In the menu bar only Interval transport option is there.
    Can anybody help me with this I hope the query is clear.
    Regards
    Vivek

    Hi,
    Number range objects can be transported using Workbench requests.
    Thanks
    Kishore

  • How to extend the range with a second Airport Express? Do I need a DSL cable?

    How to extend the range with a second Airport Express? Do I need a DSL cable?

    Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
    I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
    If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance.  But, wireless might work OK for you if you want to try that.
    Let us know "how" you want to extend......wireless or wired?

  • How to summarize age ranges i.e 0-5, 6-10........?

    Post Author: SunilKanta
    CA Forum: General
    Hi,
    I am new to crystal reports, i am designing a report i.e cross tab report as shown below,
    AGE TABLE
    0-5
    6-10
    11-15
    16-20
    21-25
    26-28
    CLASS A Count
                     7
                   15
    CLASS B Count
                     7
                   15
    CLASS C Count
                    109
                 155
                 120
                   96
                   89
    Now my questions are,
    How to display age ranges i.e 0-5, 6-10,........?
    How to group ages in range and get the count or any summarized value ?
    Here i am passing three parameters to the report which are
    1. prmLowAge
    2. prmHighAge
    3. prmAgeBand
    Above shown sample is characterised with prmAgeBand = 5, prmLowAge = 0 and prmHighAge = 28.
    And if possible please try to find the solution for variable age bands.
    Please i am very desperate. Please help me in solving this .

    Post Author: Ishe
    CA Forum: General
    You can use a Do...While loop.  You can use the funtion below:
    LOCAL STRINGVAR AGEGRP;LOCAL NUMBERVAR AGECNT := 0;
    DO (AGEGRP := CSTR(AGECNT,0) + '-' + CSTR(AGECNT+5,0);AGECNT := AGECNT + 5)WHILE AGECNT < ;
    AGEGRP
    Also, you may want to use the following funtion to get , because the formula you were going to use would only compare the year of birth to the current year and ignore the number of months and days difference.
    Int(DateDiff("d",{table.BirthDate},CurrentDate)/365)

  • How to focus a row directly when the search found the result....in active w

    how to focus a row directly when the search found the result....in active widget

    Considering that I don't understand what you're talking about - does altering the selection of the widget and requesting the focus help?

  • Question: How to assign number ranges to the Official Excise Document Numbe

    Question: How to assign number ranges to the Official Excise Document Number
    Field name is: EXNUM, table name: J_1IEXCHDR
    SAP CIN
    Dear expert,
    I will briefly explain the scenario:
    I have created return po.
    Process MIGO w.r.t. return PO- Material document generated.
    Process: J1IS - excise invoice other movement create.
    --> Now I want to print the document --> I m trying with T-code J1IP --> entered all the required data --. Used out put type - J1I0
    But I am not getting the list of document for printing and even print is not coming.
    There is no print document getting for a printing.
    When I checked in an above said table (mentioned in question), I found that for transaction type OTHR, there is no number ranges defined for official document no.
    And because of this reason I m not getting any document in the print.
    Can you Pl extend Ur help and Pl suggest me where (path or transaction) the number ranges can be maintained for the official excise document No.
    Thanking you all n advance and expecting your earliest response.
    Regards
    om

    Dear Friend,
    J_1IEXCHDR this table stores the all the excise documents created while excise transactions are done ,
    for that Goto j1i9 or SNRO  in these transaction you maintiane the number ranges  for the
    J_1IPLA2     PLA part II number range object
    J_1IRG1     RG1 Number range object
    J_1IRG1_T     No. Range for RG1 - Excise group / Material
    J_1IRG23A1     RG23A part 1 no. range object
    J_1IRG23A2     RG23A part II number range object
    J_1IRG23C1     RG23C part I number range object
    J_1IRG23C2     RG23C part II number range object
    J_1IRG23D     Folio Numbers for RG 23D
    like these  lot of objects are there  for them u maintiane the no. ranges
    Regards
    Pramod

  • How to create numkr range in pe03

    hello experts
    how to create number range in pe03 when already some others number range is saved whether to delete the others ra nge  or create a new one under others. even after creating under otherwise it is showing as error

    Hi,
    Pls correct it T.code.. Number ranges will create in PA04 T.Code. not in PE03. PE03 for features. In PE03 - NUMKR  feature- will assign the default number range- for trigger automatic no. while hiring ee's.
    See, if already some number ranges saved into one number range, you can split it with other number range like;
    01 - 000001 - 100000
    Like in your system it was saved like above.
    now you want to split the above no. range to below number range. I hope you are expecting following way.
    01- 000001 - 50000
    01- 500001- 100000
    Regards,
    Devi.

  • How to find the Ranges for a field ?

    Hello All,
               Can anyone tell me how to find the ranges for a field.
    <b>1</b>, i.e say I want the Ranges Structure for the field LIFNR.
        The ranges structure for this is "<b>RANGE_LIFNR</b>".
        This I used in my Program since I know it previously.
        But now I want the ranges structure for the field <b>VBELN (Delivery Document).</b>
        I  don't know what is it !!!!!
    <b>2</b>, Is there any procedure to know the ranges structure for a particular field ?
    Regards,
    Deepu.K

    Hi Deepu,
    Using 'Where used list' you can able to find out RANGES tables.
    For VEBLN range table is --> CRM_AC_ASSIGN_VBELN
    If you using a program defined as shown below.
    DATA: r_vbeln type ranges of vbeln.
    The above statement also creates ranges structure in Runtime.
    Procedure finding range table structures
    go to SE37 -> Enter domain or dataelement value
    Go to where used list --> search for 'Structures'
    After getting all structure  --> Click 'SEARCH' butoon in tool bar --> Search for 'RANGES' word
    You can get all ranges tables in the search window
    If helps plz reward points.
    Regards
    Bhupal Reddy

  • How to determine number range for billing document based on company code ..

    Hi Friends!!
    can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
    Amit...plz help me!!

    Hi Amit,
    1. Define different Billing Document number ranges in  SPRO -> Sales & Dist -> Billing -> Define number ranges for billing docs. (VN01). Make sure that all are internal number ranges.
    e.g.
    NO.  From number To Number    Current number  Ext
    A1   0930000000    0930999999
    A2   0940000000    0940999999
    A3   0950000000    0950999999
    2. Define a Ztable ZNUMB_RANGE as follows
    Comp. Code | Tax departure country | Billing Doc Type | Number Range
    100                IN                               F2                      A1
    200                IN                               F2                      A2
    200                US                              F2                     A3
    3. In user exit RV60AFZZ (USEREXIT_NUMBER_RANGE)
    Read table ZNUMB_RANGE for Number Range with Comp. Code, Tax country and Billing Doc.
    If found pass this number range value to us_range_intern.
    us_range_intern is a standard SAP variable which tells program which number range use to create the current document which is under process.
    Let me know if you are clear.
    Thanks,
    Mandar

  • How to focus No button in JOptionPane.showConfirmDialog?

    How to focus No button in JOptionPane.showConfirmDialog when the Dialog window is opened?
    (default it focus Yes button).
    Please help me. Thank you very much.

    Use the showOptionDialog(...) method then you can specify the buttons and which button has focus.

  • How to extend the range of my Airport Extreme network by adding an Airport Express

    How to extend the range of my Airport Extreme network by adding an Airport Express?

    You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
    The instructions that I will provide are for using AirPort Utility 6.0, which you have.
    Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
    Make sure that the wireless is turned on your Mac
    Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
    Click on the rectangle, and then click on the AirPort Express xxxxxx listing
    AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that  the Express be configured to "Extend" your wireless network.
    Edit the Base Station name to your liking, then click Next in the lower right hand corner
    Allow a full minute or two let AirPort Utility do its work
    When you see Setup Complete, click Done at the lower right of the window.
    Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
    You should be in business.

Maybe you are looking for

  • Sending file from server to client

    I am creating a server that stores application updates. When the client connects the server send the update. The server is sending the file but the file is not complete, i.e, if the file is 317kb,its send 117kb. Below is the code i am using import ja

  • I can´t restore my iPhone, error 3014

    My iPhone appears to have an error named 3014. I can´t get to restore it..

  • WebDynpro error while implementing business package for hr administrator

    Hi,    I am implementing Business package for Hr administrative services in EP 7.0. When I click the iview Start processess I get the following dynpro error. Please do help me as to how should I trace back the problem.   com.sap.tc.webdynpro.services

  • Forwarding FAX error message from SAP Connect to  user outlook e-mail ID

    Hello, We have a few POs sent by FAX to vendors using top call .Some times FAX does not transmit the PO to vendor . The status of the message is updated as error in SAP connect( t-code SOST) . The user who released the PO or recreated the   message i

  • Why does one CSS min-width work and the other does not?

    In order to deal with different browser/screen widths, I put a min-width on both the light-colored box that contains the images and article text on my Web pages and also on the text itself. When I test this in Firefox, IE8 and Chrome, only the contai