How to 'force in' the Depreciation Area for an Asset after it was created

Hi,
When I created an new asset under a new asset class, I forgot to set-up the depreciation area for that class. Now after I have saved/created the asset, I get this error : No depreciation areas have been defined for asset 1012500000-0. How do I 'force-in' the depreciation area now after it has been setup.

try and read docu to tcode AFBN
(if your problem is in production, consult SAP-OSS)
A.

Similar Messages

How to get the depreciation areas for an asset in particular period

Hi frndz,
how to get the depreciation areas for an asset in a particular period for writeup or manual depreciation method.
Thanks and regards.
Harisumanth.Ch

Try table ANLB, then read ANLC.
Regards.

Post revaluation to selected depreciation area for an asset

Hi,
We are using depreciation area '01' for posting to GL accounts and '02' for fiscal reporting. It turned out that couple of assets had wrong depreciation key specified for depreciation area '02', which resulted in wrong depreciation calculated for '02' in last 3 years.
We would like to correct it now, once we discovered this issue. One of the ideas was to create new revaluation transaction type which is active only for depreciation area '02', which will only change value of asset in that particuaral area without affecting correct '01',
However, after configuring new transaction type in AO84 and assigning it to '02' depreciation area in OAXJ, when I tried to run ABAW for this asset - it gave me error AA 380.
+Inconsistency between the specifications for transaction type Z11 and for the depreciation areas in chart of depreciation PTI.
Depreciation area 02 is defined (in Customizing), so that it is required to take over values from area 01. However, one of these ares cannot be posted to, due to the specifications in transaction type Z11. This combination is not allowed.+
Is it possible to configure postings only to one depreciaton area? If not - is there any other easy way of revaluating only one depreciation area for an asset.
Thank you,
Karol
Edited by: Karol on Oct 6, 2011 9:54 AM

Hi Blaz,
Thank you for your reply. I am trying to increase the value of the asset in depreciation area 02, because due to wrong depreciation key it got fully depreciated last year in 02. I want to add the value to 02 which should have not been depreciated in last 2 years. Is there a way to increase its value using ABAA?
Thank you,
Karol

Trying to figure out how to clear out the spool area for my HP printer on my 2009 IMac?

HP advised that I should clear out the spool area for my printer. How do I do this?

Hi patricia m.
I'm sorry to hear that you are encountering difficulties in clearing the spool area for your printer. It is rather "windows-centric" language as Mike indicated. I believe that HP Support would have been referring to resetting your printing system and I have included a document on how to do that.
If you find after resetting your printing system that issue hasn't been corrected, please post some additional information and I would enjoy helping you resolve things. I would need to know what model/product number of HP Printer you have, the version of Mac you are running, how the printer is connected (wireless, USB) and the issue you have encountered.
Macintosh: Resetting the Printing System in Mac OS X
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01371980
Happytohelp01
I work on behalf of HP

How to bring back deactivated depreciation areas in AS92

We deactivated 6 depreciation areas in AS92 for 1 asset. How can we bring them back? Thanks!

OAYZ is to change activate/deactivate depreciation areas for the asset class. In AS92, I can deactivate depreciation area for a particular asset but how do I reactivate the depreciation area that I deactivated in AS92? THanks!

Post revaluation to selected depreciation area of an asset

Hi,
We are using depreciation area '01' for posting to GL accounts and '02' for fiscal reporting. It turned out that couple of assets had wrong depreciation key specified for depreciation area '02', which resulted in wrong depreciation calculated for '02' in last 3 years.
We would like to correct it now, once we discovered this issue. One of the ideas was to create new revaluation transaction type which is active only for depreciation area '02', which will only change value of asset in that particuaral area without affecting correct '01',
However, after configuring new transaction type in AO84 and assigning it to '02' depreciation area in OAXJ, when I tried to run ABAW for this asset - it gave me error AA 380.
'Inconsistency between the specifications for transaction type Z11 and for the depreciation areas in chart of depreciation PTI.
Depreciation area 02 is defined (in Customizing), so that it is required to take over values from area 01. However, one of these ares cannot be posted to, due to the specifications in transaction type Z11. This combination is not allowed.'
Is it possible to configure postings only to one depreciaton area? If not - is there any other easy way of revaluating only one depreciation area for an asset.
Thank you,
Karol

Hi Blaz,
Thank you for your reply. I am trying to increase the value of the asset in depreciation area 02, because due to wrong depreciation key it got fully depreciated last year in 02. I want to add the value to 02 which should have not been depreciated in last 2 years. Is there a way to increase its value using ABAA?
Thank you,
Karol

After AFAB, I've changed depreciation key for an asset from 20% to 0%

Hi All,
I've posted depreciation (AFAB) for periods from 01 to 04 (Depreciation Area 20).
Later I've changed the depreciation key for an asset from 20% to 0%.
In my test SAP allows me to update depreciation data only in the period 05 (for previous data).
Is there the way to repete the depreciation posted in the periods from 01 to 04!
Cluo d anyone help me??
Thanks

Rossi,
Since you have already posted the depreciation for the periods 01 to 04, the system assumes that there are no postings pending for those periods and hence shows the recalculated depreciation in period 05. But you can do the repeat depreciation run using AFAB transaction code. You can try them for period 04 and the entire depreciation posted till 04 will get charged in Period 04 itself.
Regards,
Vinod

How can we automate the Depreciation keys based on production for business

How can we automate the Depreciation keys based on production for business u2013 this is currently not an optimised process if we expect business to manually change the keyu2019s on a monthly basis.
The end user updates the table, transaction AO25, manually on month end after the production calculations are completed. The question is, is it possible when the PP is completed, that the system updates the Period Unit table for that period?
Thanks.
Regards,
PS PS

Hi,
I am new at this, so I need a explanation on how will this help me, and how do I get about doing this?
Thanks a lot.
Regards,
PS PS

How to correct the derived depreciation area balances (Group Assets)

Hi SAP Gurus....
Due to some wrong configurations for one derived depreciation area (Group Assets) values have not updated in that derived depreciation area and related group assets. Now how to update the same APC values in derived depreciation area and Group Assets from already posted APC values in real depreciation areas.
Thanks in advance.

Hi All
Any Comments.................

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

I have configured my android to connect to .me / cloud email. It works. But is does not do automatic email delivery. It seems to do fetch, not push. The settings are for imap. Can anybody tell me how to get push?

I have configured my android to connect to .me / cloud email. It works. But is does not do automatic email delivery. It seems to do fetch, not push. The settings are for imap. Can anybody tell me how to get push?

As Roger said, iCloud does not support external POP accounts.
However, you can configure your Max to directly receive your Yahoo! email by following these instructions:
http://hints.macworld.com/article.php?story=20110208153256491
Note that this works (for me) without a Yahoo Plus! account - and make sure that you scroll down to the comment at the end of the article which has all of the correct settings in one place.
Cheers,
Rodney

I have a MacBook that is synced with my ipad. My daughter has an Iphone4 and no computer. How can we use the one computer for both devices that are unique?

I have a MacBook that is synced with my ipad. My daughter has an Iphone4 and no computer. How can we use the one computer for both devices that are unique and keep them separate. thank you for your help!

This should help:
How to use multiple iPods, iPads, or iPhones with one computer
Regards.

Legacy data transfer for new depreciation area for already existing assets

Hi all,
I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
I like to give Ordinay depreciation posted amount for the current FY for these assets in AS92, but i find this field is not editable inAS92.
Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
Regards,
Srinivas

HI,
I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
Where in AS92, i am able to update Opeing APC Cost and Opeing Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
Please guide me how to update posted deprecation for new deprecaition area in AS92 or some other way for already existing assets.
REgards,
Srinivas

How can I quit the photos app? It has been trying to create a library for hours but nothing happens. when I try to quit, it won't let me.

How can I quit the photos app? It has been trying to create a library for hours but nothing happens. when I try to quit, it won't let me. Have just upgraded from iPhotos so don't want to lose any content.

How can I quit the photos app? It has been trying to create a library for hours but nothing happens. when I try to quit, it won't let me. Have just upgraded from iPhotos so don't want to lose any content.
Force-quit Photos as recommended by Arsenal1607.
Make backup of your iPhoto Library and run the iPhoto Library First Aid tools to repair the permissions on your library and rebuild the iPhoto Library.
To launch the First Aid Tools hold down the alt/option and the command key simultaneously while double clicking the iPhoto Library to launch the iPhoto Library First aid tools. You'd to hold down both keys firmly and long enough, until the First Aid panel will appear.
Try both the options "Repair Permissions" and "Rebuild library". Then try again to migrate the iPhoto Library to Photos by dragging it onto the Photos icon in the Dock.
Make sure, you have plenty of free storage. Don't try the migration, if you are running out of storage.

How does one change the font size for folders and/or file lists in the Bookmarks Library?

How does one change the font size for folders and/or file lists in the '''Bookmarks''' Library?
Since the upgrade to version 9.0.1 of Firefox, the Bookmarks feature changes are confusing me. They seem to be confusing themselves as well. The list of bookmarks has changed. The font size is so small that my aging eyes cannot read it without fogging the screen with my breath. Some folders are out of alphabetical order (where I know they were previously good), and some are missing altogether (folders to which I frequently add references).
As for missing or deranged files or folders, was there something that I should have done or now need to do to recover those after the upgrade (or before)?
With regard to font size,
1. there is no “Edit Bookmarks” or like option to edit the list in this version
2. the “zoom” option in the “view” list of functions is greyed out when in “Show All Bookmarks” window
3. expanding the browser window has no effect on font size
4. “Preferences” settings for font size has no effect in that window either, including advanced settings
5. “Help” offers none that I can find.
Can any of you Help?!?

Maybe this extension helps:
*Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/

How to 'force in' the Depreciation Area for an Asset after it was created

Similar Messages

Maybe you are looking for