How to force IPv4 with ServerSocket?

Hi!
Is it possible to force ServerSocket to bind only IPv4 address?
Thanks!

-Djava.net.preferIPv4Stack=true.
See http://java.sun.com/j2se/1.5.0/docs/guide/net/ipv6_guide/index.html

Similar Messages

How to force a new password in portal with LDAP user? external users

With an external portal (used by agents that do not work for you or reside in your office), company policy is for password to be changed every qtr.
If the users are creating as LDAP users how to force them to change their password when required?
Is this a custom application that needs to be written so when they log into the portal if the qtr has expired the portal ask them to enter a new password that becomes valid for the next qtr.
Versus internally deleting and emailing all the users a new password?

Hi Glenn,
We are getting one problem when we are creating user in LDAP and login with that user in Portal that time we are getting Password change screen , but when we create a user in LDAP and change the password of that user in LDAP then when the user tries to Login to portal that time we are not able to see the password change screen.
But again if we change the password of that user through Portal we are able to see change password screen.
can you help on this how we can force the user to change password when we are changing password in LDAP or in SAP System.
Regards
Trilochan

How to force OSX to connect to a specific Access Point i.e. manually choosing beetween different APs with the same SSID?

My office room is near different APs with the same SSID, my Snow Leopard selects automatically to join the AP with stronger signal.
But this AP isn't running well, so I want to force my mac to join a AP with weaker signal.
(I've the same troubel as described in https://discussions.apple.com/message/6470508#6470508)
Note that I'm a guest user and I hanen't access to APs, so I cannot change their SSID.
Any idea how to force Mac to join a specific AP?
Thanks,
adso

My office room is near different APs with the same SSID, my Snow Leopard selects automatically to join the AP with stronger signal.
But this AP isn't running well, so I want to force my mac to join a AP with weaker signal.
(I've the same troubel as described in https://discussions.apple.com/message/6470508#6470508)
Note that I'm a guest user and I hanen't access to APs, so I cannot change their SSID.
Any idea how to force Mac to join a specific AP?
Thanks,
adso

How to force refresh of data through browser or PDF?

We have the dashboard set to refresh every minute. We are pulling the data using XML from DB. When we are in browser and clear the browser cache and then reload the .swf... the data is updated. We haven't been able to figure out how to force the cache-clear and data refresh with either swf or pdf.
Your help is greatly appreciated.

Hi Jeff,
Is the XML coming from a web page or a web server?
If yes then you can give this a go. To stop the caching mark your web page with extra tags to say it has expired.
HTML page example:
<HEAD>
< META HTTP-EQUIV="PRAGMA" CONTENT="NO-CACHE" />
< META HTTP-EQUIV="EXPIRES" CONTENT="0" />
</HEAD>
JSP example:
<%
// Stop Internet Explorer from caching the results of this page.
// We do this so that every time Xcelsius calls this page it see the latest results.
response.setHeader("Cache-Control","no-cache"); //HTTP 1.1
response.setHeader("Pragma","no-cache"); //HTTP 1.0
response.setDateHeader ("Expires", 0); //prevents caching at the proxy server
%>
Regards,
Matt

How to force the "Bluetooth Communications Port" to be one of COM1 to COM8 ports?

Dear Lenovo Community, Happy Holidays to you all and wish you a great happy new year. Recently purchased a Bluetooth OBDII device and have difficulty making it to work with its provided software on my T61 (running original XP Home). My short story and question/problem is that I can open "My Bluetooth Places" and pair with the OBDII device as an "OBDII SPP Dev", but my T61 assigns serial port COM19 to it. The OBDII software which came with the device only can let user set to one of the COM1 to COM8 ports and in the properties of Bluetooth pairing, there is no way that I can select which COM port to use. I looked at the Device Manager and I do see these COM port assignments: COM4,5,6,7: Sierra Wireless (the HSDA modem in the laptop which I have never used BTW) COM 9,10,11,12,13,14,15,16,17: Bluetooth Serial Port COM 18, 19: Bluetooth Communications Port and I don't see anything for COM1,2,3, and 8 My question is how to force the computer/OS to assign one of the COM1 to COM8 ports to my device upon pairing? Can I disable the Sierra Wireless model from the COM ports list and hope this will happen? Thanks for your help and inputs beforehand. Regards, AL

Hi, AL_K
Have you attempted to change the port number in device manager itself? If you navigate to Device Manager and open the list of Ports, you can right-click on the device you wish to assign a different port number. After right-clicking, click Properties. There should be a tab called Port Settings. In here, you should find a setting to manually assign a port number.
Good luck, and let me know how it goes,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Adobe Acrobat 9 Standard is still seeing my old scanner install. How to force it to see new scanner install.

Adobe Acrobat 9 Standard is still seeing my old scanner install. How to force it to see new scanner install? Scanner is recognized by and works fine in Windows. Acrobat however still sees Fujitsu fi-6130dj #3. I need it to see Fujitsu fi-6130dj which is what is listed in Device Manager. (Windows XP SP3).
Thank you for any suggestions.

To provide more detail and list what was done to resolve the issue but there may be a better way.
Background. When you install a USB device to a PC it is listed in Windows Device Manager as installed hardware. If you take the USB plug for any device and plug it into a different USB port on the PC the PC will install drivers again for that device. In Device Manager, if you set a system environment variable for device manager to show non-present devices you can see all of the times this may have occurred. In this specific instance there were five installations in Device Manager for one piece of hardware, a Fujitsu fi-6130 scanner. The first listing was Fujitsu fi-6130dj, then Fujitsu fi-6130dj #2, Fujitsu fi-6130dj #3 and so on. Adobe Acrobat only saw the third instance of these drivers being installed. Once I cleaned Device Manager of all Fujitsu scanner installs I was able to have a single set of drivers installed for this Fujitsu but Adobe still recognized the third instance of the driver install and I could not figure out how to force it to see what Device Manager was seeing, a single instance of the scanner being installed (with no #3 behind it).
Steps performed to try to resolve.
Repair install of Adobe - no luck - still sees the #3 instance of the scanner
Deactivation, uninstall, reboot, reinstall, reactivation of Adobe - no luck, same behavior as above
Complete removal of all scanner related software. This included the ISIS drivers in Add/Remove Programs and all other related software. This also included deleting the contents of the TWAIN_32 directory found within the root of the Windows directory and also included deleting the scanner from Device Manager.
Rebooted.
Reinstalled complete packages of both TWAIN and ISIS scanners - with the scanner disconnected. Powered the scanner back on and let Windows install the drivers for the hardware. Only at this point did Adobe see the new install of the Fujitsu scanner and no longer looked for the #3 instance of that scanner install.

How to Force enable, silent updates for Adobe flash in windows 8

How to Force enable updates, silently for Adobe flash in windows 8 using group policy?
I have followed this Article:
http://helpx.adobe.com/flash-player/kb/administration-configure-auto-update-notification.h tml
http://gpyall.com/archives/disable-adobe-flash-updates-on-64-bit-windows-with-group-policy /
This looks promising but not working.
Also, I cannot even manually create a file, in Win 8 (C:\Windows\SysWOW64\Macromed\Flash)
So how would group policy can put mms.cfg in this location with following vaule:
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
Thanks in Advance.

You will find more information in http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/flashplayer/pdfs/flas h_player_11_7_admin_guide.pdf

How to force my Web part to run regardless of users permissions

I have created the following custom permission , which will allow users to Create items without being able to view,edit them:-
$spweb=Get-SPWeb -Identity "http://vstg01";
$spRoleDefinition = New-Object Microsoft.SharePoint.SPRoleDefinition;
$spRoleDefinition.Name = "Submit only";
$spRoleDefinition.Description = "Can submit/add forms/files/items into library or list but cannot view/edit them.";
$spRoleDefinition.BasePermissions = "AddListItems, ViewPages, ViewFormPages, Open";
$spweb.RoleDefinitions.Add($spRoleDefinition);
$spweb.Dispose();
then inside my "Issue Tracking List" i stop inheriting permission from team site , and i define the following permission for all users:-
now users can add items and they can not view them ,, which is perfect :).
But now i wanted to add a custom web part to my Create form which will hide certain fields if the user is not within specific group ,the web part looks as follow:-
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
SPGroup group = web.Groups["Intranet Visitors"];
bool isUser = web.IsCurrentUserMemberOfGroup(group.ID);
if (!isUser)
SPList myList = web.Lists.TryGetList("Issue List");
SPField titleField = myList.Fields.GetField("Category");
titleField.Hidden = true;
titleField.ShowInEditForm = false;
titleField.ShowInNewForm = false;
titleField.ShowInDisplayForm = false;
titleField.Update();
myList.Update();
// web.AllowUnsafeUpdates = false;
else
SPList myList = web.Lists.TryGetList("Issue List");
SPField titleField = myList.Fields.GetField("Title");
titleField.Hidden = false;
titleField.Update();
myList.Update();
// //web.AllowUnsafeUpdates = false;
web.AllowUnsafeUpdates = false;
then i deploy the web part and i add it to the Create form. but after doing so user are not able to create items and they will get the following error:-
Sorry this site has not been shared with you
so can anyone advice how to force my web part to run , without checking the users permissions or with minimal permssions ?

in this case, use the elevated privileges to read/add/edit items with elevated privileges with below code.
but make sure the page which you add this web part have at least read access to all user.
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(web.Site.ID))
// implementation details omitted
More: http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spsecurity.runwithelevatedprivileges.aspx
Bistesh
Ok after adding :-
SPSecurity.RunWithElevatedPrivileges(delegate()
users with the following permissions can create items:-
"AddListItems, ViewPages, ViewFormPages, Open";
and they can not edit/read them, which is great. but i am facing a caching problem , because if user is inside the "Intranet visitor" he will be able to see Category field as mentioned in my code, but if i remove him from the "Intranet Visitor"
he still can see the field,, although in the web part i specify not to display the Category column if the user is not inside the "Intranet visitor " group... here is my current code:-
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
SPGroup group = web.Groups["Intranet Visitor"];
bool isUser = web.IsCurrentUserMemberOfGroup(group.ID);
if (!isUser)
SPList myList = web.Lists.TryGetList("Risk & Issue Management");
SPField titleField = myList.Fields.GetField("Category");
titleField.Hidden = true;
titleField.ShowInEditForm = false;
titleField.ShowInNewForm = false;
titleField.ShowInDisplayForm = false;
titleField.Update();
myList.Update();
// web.AllowUnsafeUpdates = false;
else
SPList myList = web.Lists.TryGetList("Risk & Issue Management");
SPField titleField = myList.Fields.GetField("Category");
titleField.Hidden = false;
titleField.ShowInEditForm = true;
titleField.ShowInNewForm = true;
titleField.ShowInDisplayForm = true;
titleField.Update();
myList.Update();
web.AllowUnsafeUpdates = false;
so can you advice please ? is this a caching problem, or once the user add at-least single item he will be able to see all columns ?

How to force digital input sample rate?

Does anyone know how to force a Digital Input sample rate and/or tell Core Audio which conversion clock to use... internal or external? Apparently both things can be done from Pro Tools, but I don't have it. My problem is locking onto an A/D converter's 48K Toslink output. I can set 48K in 'Audio - Midi' setup and the audio is perfect, but a few seconds later Core Audio returns to the default 44.1K. I need to force it to stay at 48K, or clock on the signal rather than internal clock.

Braver,
Let me clarify a few things. First, the 6733 supports correlated digital I/O. This means that the digital operation does not have its own clock. You can correlate the digital operation with the AO clock, which will allow a digital operation up to the max AO rate. You can generate a pulse train with an onboard counter and use that as your digital clock source. Also, you can use a completely external clock source to achieve the max digital rate of 10MHz. The knowledge base, linked below, points you to a couple of examples that ship with LabVIEW. Be sure and read the documentation associated with each example.
Knowlege Base
As for
the example CDI Single Point clocked by Counter (E).vi, notice how the output of...

How to force user to enter supplier/customer name in captial letters in R12

Dear all,
Could anyone pls advise how to force user to enter supplier/customer name in captial letters in R12? Can I do it using OA framework personalization?
HY

Pl post exact versions of OS and EBS.
The ability to do this exists in forms (professional user interface) using forms personalization, but does not exist in the OAF (self-service) interface, AFAIK. See related MOS Doc 399892.1 (Is It Possible To Restrict Employee Name Entry To All Upper Case in the PUI And SSHR ?) for some details.
Pl confirm by opening an SR with Support.
HTH
Srini

I need to know how to force a https redirect in Adobe Muse if this can't be done please tell me so I don't waste any more time... please

I need to know how to force a https redirect in Adobe Muse if this can't be done please tell me so I don't waste any more time... please

Protocol usage and redirects are a server-side thing. This has nothing to do with designing the web page and thus nothing with Muse, either.
Mylenium

How to use setSoTimeOut() with socket ??

HI All!
I eagerly need to know how to use setSoTimeOut() with socket (on server side).
Actually the scenario is that My Server accepts connection and waits for connected client to send data to it. I WANT TO KEEP, IF CLIENT DOENS'T SENDS ANY DATA TO SERVER WITHIN 5 min. THEN SERVER MUST CLOSE THE CONNECTION, BUT IF SERVER RECEIVES STILL A BYTE FROM THE CLIENT WITHIN 5 mins., THE SERVER MUST RESET CHECKING TIME OUT FOR NEXT 5 MINUTES.
How can i do that??
Any help with example will be appreciated!!
Thanx in advance

you'd have to do something like this:
(this is all assuming you want to read Strings from the socket. setSoTimeout works for any read() call to the InputStream associated with the Socket)
ServerSocket ss = new ServerSocket(myPort);
Socket s = ss.accept();
s.setSoTimeout(5*60*1000); // 5 mins * 60 secs * 1000ms
BufferedReader in = new BufferedReader(new InputStreamReader(s.getInputStream()));
boolean running = true;
while(running)
try
String readIn = in.readLine();
// do whatever you want with the data read
catch(SocketTimeoutException)
running = false;
Now. That's what I think needs to be done. I don't have Java on the machine I'm currently on, so I can't test/verify it, but it goes something like that.
Good luck,
Radish21

How to force english language for VC BI Iview

Hi,
All developments in BI system are english so when users launch VC BI Iview from the portal what ever the logon language in the portal we would like that users get results in english.
In the VC iview, for parameter Forced Request Language we select value English but it doesn't work.
We don't find other iview parameter which allows to do that.
With BEX WEB template iview, we can do that by setting LANGUAGE=EN for parameter Application Parameters in the
iview.
Do you know how to force English language for VCBI Iview ?
Thanks in advance for your help.
Mai

Hello,
If you use Delta Links between your portal objects (role, workset, page, iview), make sure that the Forced Request Language is set to "English" on the linked iView (which is only accessible from the page, from the workset, from the role...)
Regards
Arnaud

How to force the Netscape Browser to open the "Open or Save" dialog box?

Hi, I tried to force the browser to open the "Open or Save" dailog box for downloading a file.
response.setContentType(context.getMimeType(file.getName()));
response.setHeader("Content-Disposition", "attachment; filename=\"" + file.getName() + "\"");
This works fine with IE for all file types( Even though he prompts twice to Open the file directly). but Netscape opens the file directly in the browser with showing any dialog box for text and html files. Anyone knows how to force the netscape in this case or for any file type? Any help will be appreciated.
Thanks

any one has the solution for this issue ? I tried the search and I didnt find any answer.
when your trying to open a pdf file as attachment is seperate window, it works well in IE but in netscape it opens up in the same browser, it doesnt open a seperate window
res.setContentType( "application/pdf" );
res.setHeader("Content-Disposition","attachment; filename=\"" + cofcFileName+"\"");

How to Force the Good Plan present in dba_hist_sql_plan for an SQL_ID

Hi Folks
Here i have a question on how to fix the query execution plan for which we are facing the problem. The current execution plan of the SQL ID is bad , but the execution plan in dba_hist_sql_plan or v$sql_plan is showing good one's.
So how to force the plan_hash_value present in dba_hist_sql_plan or v$sql_plan to the current sql. Where in we cannot try using any kind of hints in the SQL so my question here , is there any way to update manually to update the plan_hash_value for the SQL_ID so that it can use the execution plan which we want to force.
Regards,
Phani.

But my question is i have the good plan for the SQL_ID which is now running with the bad plan ( I am able to see the good plan in dba_hist_sql_plan view ) , my challenge here is how to force >the SQL_ID to take good plan PLAN_SQL_HASH_VALUE. Once the query is parsed and in memory I'm not aware of any way of changing the plan :(
A day later a similar situation came up with one of our clients. I'm still not aware of any way to manually change the execution plan of an already parsed SQL but suspect histograms and/or bind peeking may be a way to explain this phenemenon
Edited by: riedelme on Jun 18, 2010 6:13 AM

How to force IPv4 with ServerSocket?

Similar Messages

Maybe you are looking for