How to force spry to render properly?

Does anybody have a hack to spry, to force it to render
crlfs? Could do javascript replaces with <br> but spry will
not render those. Could have the replace done in the database
layer, but spry still refuses to render those as well.
You could have a cold fusion page in the middle of spry calls
to do the replace, but spry loves weeding out anything done in CF
After a search on google, there is nothing shown on how to do
this with spry ... have anybody else run into this issue?

I would suggest making sure SEQUENCE--->RENDER ALL has a checkmark next to every one of them...though the end result should be the same as previously suggested. Pressing Option R sometimes renders everything when you have it selected that even Command R doesn't render.

Similar Messages

How to force Premiere to render previews?

Hi, everyone. I have a clip that's high definition. It's been video denoised and colour corrected and vignetted, and to preserve quality it's rendered in QuickTime Animation codec with quality of 100 (lossless). It's 37 gigabytes for 3 and a half minutes, and my humble MacBook Pro can't play it in real time. That's no problem, as long as I can use previews to do my editing.
But it looks like Premiere Pro CS 6.0.1 is trying to use the original file instead of creating previews. If I delete all preview files, the line above the clip stays yellow/green (I'm colour blind, sorry I can't tell the difference). If I drop the sequence preview resolution, it stays yellow/green.
I want the original footage for quality, but I want to edit using something lossy. How do I force Premiere to make a low-bitrate version of the file for preview purposes?
Richard

UT doesn't lose any quality and niether does Lagarith. Both of these codecs are 100% lossless. DNxHD is visually lossless which I have done many many test with and I haven't ever seen any loss with it. But honestly I was just trying to recommend you consider using one of the codecs I mentioned instead of Animation beause Animation takes forever to render and also produces HUGE files and it doesn't produce any better results than UT or Lagarith, and for all intensive purposes doesn't look any better than DNxHD either (since it's visually lossless).
Also with Lagarith and UT and DNxHD you probably wouldn't need to render to begin with. (depending on what you're doing) but since you've been using animation already I understand if that's what you'd continue to like using I actually used to use Animation and PNG back before I found out about the options I have listed.

Some pages don't render properly after Java update for OSX 10.6.8

I can't seem to get T-mobile.com's website pages to render properly anymore. So far, this is the only website I'm having this issue with, though there could be more I'm not aware of.
I go to www.t-mobile.com and this is what I get:
I think I might be missing a plug-in, but not sure; if so, I don't know which one or how to get it.
This only started happening after the latest Java update for OSX 10.6.8, which I installed on Feb. 24, 2013. All of T-mobile's pages look like this, except if I go to www.my.t-mobile.com's home page. Then I get a normal page, but after I log in, I get more wierd rendering issues again. So here's the page that appeared normal today:
And after I log in successfully, I'm back to the wierd rendering issues again:
I was so lost but then I decided to try a work around to get my online bill and managed to get it, but I don't want to see the pages like this. So help please?

So, here's more on my point...
I put in the 3 captured screen shots in my original post above. I used Grab to copy the web pages, saved them to my desktop as .tiff files and dropped them in for others to view. This morning, I went to look at my post and instead of seeing the screen shots, I see 3 tiny blue boxes with question marks. When I left click on the boxes, nothing happens. When I right click on them, I get options that are not helpful:
Open Image in New Window
Open Image in New Tab
Download Image
Copy Image Address
Import Image
Capture Selection from Screen
Convert Selected Traditional Chinese Text (why the frack is this an option?)
Convert Selected Simplified Chinese Text (or this an option?)
I checked my Safari Preferences and I see I have checked, under Security, Enable plug-ins, Enable Java, Enable JavaScript.I have to have Java enabled to run a few things.
Did something get corrupted in Safari?
Am I'm missing some plug-ins?
How do I get them back?
I'm going to search the internet. Well, after doing the search, I still don't think I've got what I need. Thinking I might need to reinstall Safari. If this is the case, will I loose all my Bookmarks?

Dynamic elements don't render properly, twitter, facebook, etc.

Most simple webpages load just fine, but anything with dynamic content, sticky menu bars, text inputs that scroll, and other elements don't render properly. They load and then immediately disappear leaving just white space. Some sites will return eventually or load if scrolled to a certain point on the page. Other pages are fine on load but then once menus are loaded or the page is scrolled to a certain point the content disappears, only to return when the page is scrolled back to the top or the menu is closed.
For example, none of the divs on Twitter display content unless I scroll down about two page heights. Alternatively, my Facebook feed loads just fine until I start to scroll down, at which point the side bars and chat window lose content periodically. Now that I've typed enough in this text field to necessitate scrolling, I lose content if not at the top of the box. I had to stretch the field in order to eliminate scrolling.
I am running Firefox 30 on MacOSX 10.8.3. The issue does not present in Safari or on other computers on the same network with the same setup. I have tried clearing the cache, clearing cookies, updating Firefox, resetting Firefox, reinstalling Firefox, updating Flash, and updating Java.

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache
'''[https://support.mozilla.org/en-US/kb/how-clear-firefox-cache How to clear the Firefox cache]''' {web link}
and
* Remove Cookies
'''''This will log you out of all sites you're logged in to.'''''
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy.'''
Under '''History''', select Firefox will '''Use Custom Settings'''.
There is a button on the right side called '''Show Cookies'''.
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart.

How to force mpeg 4 video to always loop.

Hello,
I've created some animated loops for for use as podcasts for video iPods. As required these files are in H.264 format and store as ".m4v" files.
Can someone please tell me how to save these files in a way that they are forces them to loop when played, not simply play once and stop.
This is critical for the iPod experience to be ideal. Thanks.
-Doug

QuickTimeKirk,
My goal is to create a looping animation for playback on an iPod. Should be easy right? Not with the QT!
I did the following:
1) Render a bunch of frames destined for looping.
2) Convert them to an uncompresses ".avi" file.
3) Open the ".avi" file in QT Pro.
4) Click "Loop"
5) Play movie. It loops nicely.
6) Click "Export" and select "Movie to QuickTime Movie"
7) Click "Save"
When I play the saved ".mov" file (You said QT retains the metadate requiring looping) IT DOES NOT LOOP!
To recap: This is a Quicktime movie. I selected looping when I created the bloody thing.
It
does
not
loop.
This *****.
This is REALLY, REALLY, ANNOYING! *** is going on with this QT Pro crap? I simply want to loop the movie. Is that really asking too much? I don't think so.
Can someone, anyone, please, please, tell me how to force the movie to loop on launch. Forcing an iPod user to muck about and select looping (can they even do that?) is not an option. Period.
Please help me,
Doug

How to force refresh of data through browser or PDF?

We have the dashboard set to refresh every minute. We are pulling the data using XML from DB. When we are in browser and clear the browser cache and then reload the .swf... the data is updated. We haven't been able to figure out how to force the cache-clear and data refresh with either swf or pdf.
Your help is greatly appreciated.

Hi Jeff,
Is the XML coming from a web page or a web server?
If yes then you can give this a go. To stop the caching mark your web page with extra tags to say it has expired.
HTML page example:
<HEAD>
< META HTTP-EQUIV="PRAGMA" CONTENT="NO-CACHE" />
< META HTTP-EQUIV="EXPIRES" CONTENT="0" />
</HEAD>
JSP example:
<%
// Stop Internet Explorer from caching the results of this page.
// We do this so that every time Xcelsius calls this page it see the latest results.
response.setHeader("Cache-Control","no-cache"); //HTTP 1.1
response.setHeader("Pragma","no-cache"); //HTTP 1.0
response.setDateHeader ("Expires", 0); //prevents caching at the proxy server
%>
Regards,
Matt

How to force a new password in portal with LDAP user? external users

With an external portal (used by agents that do not work for you or reside in your office), company policy is for password to be changed every qtr.
If the users are creating as LDAP users how to force them to change their password when required?
Is this a custom application that needs to be written so when they log into the portal if the qtr has expired the portal ask them to enter a new password that becomes valid for the next qtr.
Versus internally deleting and emailing all the users a new password?

Hi Glenn,
We are getting one problem when we are creating user in LDAP and login with that user in Portal that time we are getting Password change screen , but when we create a user in LDAP and change the password of that user in LDAP then when the user tries to Login to portal that time we are not able to see the password change screen.
But again if we change the password of that user through Portal we are able to see change password screen.
can you help on this how we can force the user to change password when we are changing password in LDAP or in SAP System.
Regards
Trilochan

How to force the "Bluetooth Communications Port" to be one of COM1 to COM8 ports?

Dear Lenovo Community, Happy Holidays to you all and wish you a great happy new year. Recently purchased a Bluetooth OBDII device and have difficulty making it to work with its provided software on my T61 (running original XP Home). My short story and question/problem is that I can open "My Bluetooth Places" and pair with the OBDII device as an "OBDII SPP Dev", but my T61 assigns serial port COM19 to it. The OBDII software which came with the device only can let user set to one of the COM1 to COM8 ports and in the properties of Bluetooth pairing, there is no way that I can select which COM port to use. I looked at the Device Manager and I do see these COM port assignments: COM4,5,6,7: Sierra Wireless (the HSDA modem in the laptop which I have never used BTW) COM 9,10,11,12,13,14,15,16,17: Bluetooth Serial Port COM 18, 19: Bluetooth Communications Port and I don't see anything for COM1,2,3, and 8 My question is how to force the computer/OS to assign one of the COM1 to COM8 ports to my device upon pairing? Can I disable the Sierra Wireless model from the COM ports list and hope this will happen? Thanks for your help and inputs beforehand. Regards, AL

Hi, AL_K
Have you attempted to change the port number in device manager itself? If you navigate to Device Manager and open the list of Ports, you can right-click on the device you wish to assign a different port number. After right-clicking, click Properties. There should be a tab called Port Settings. In here, you should find a setting to manually assign a port number.
Good luck, and let me know how it goes,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Adobe Acrobat 9 Standard is still seeing my old scanner install. How to force it to see new scanner install.

Adobe Acrobat 9 Standard is still seeing my old scanner install. How to force it to see new scanner install? Scanner is recognized by and works fine in Windows. Acrobat however still sees Fujitsu fi-6130dj #3. I need it to see Fujitsu fi-6130dj which is what is listed in Device Manager. (Windows XP SP3).
Thank you for any suggestions.

To provide more detail and list what was done to resolve the issue but there may be a better way.
Background. When you install a USB device to a PC it is listed in Windows Device Manager as installed hardware. If you take the USB plug for any device and plug it into a different USB port on the PC the PC will install drivers again for that device. In Device Manager, if you set a system environment variable for device manager to show non-present devices you can see all of the times this may have occurred. In this specific instance there were five installations in Device Manager for one piece of hardware, a Fujitsu fi-6130 scanner. The first listing was Fujitsu fi-6130dj, then Fujitsu fi-6130dj #2, Fujitsu fi-6130dj #3 and so on. Adobe Acrobat only saw the third instance of these drivers being installed. Once I cleaned Device Manager of all Fujitsu scanner installs I was able to have a single set of drivers installed for this Fujitsu but Adobe still recognized the third instance of the driver install and I could not figure out how to force it to see what Device Manager was seeing, a single instance of the scanner being installed (with no #3 behind it).
Steps performed to try to resolve.
Repair install of Adobe - no luck - still sees the #3 instance of the scanner
Deactivation, uninstall, reboot, reinstall, reactivation of Adobe - no luck, same behavior as above
Complete removal of all scanner related software. This included the ISIS drivers in Add/Remove Programs and all other related software. This also included deleting the contents of the TWAIN_32 directory found within the root of the Windows directory and also included deleting the scanner from Device Manager.
Rebooted.
Reinstalled complete packages of both TWAIN and ISIS scanners - with the scanner disconnected. Powered the scanner back on and let Windows install the drivers for the hardware. Only at this point did Adobe see the new install of the Fujitsu scanner and no longer looked for the #3 instance of that scanner install.

How to force using the adobe reader to view the PDF by javascript / PHP / HTML?

I use the standard way to embed a pdf to my website, however, when I open it the browser will choose the default pdf viewer instead of the adobe reader. I can change it manually by looking at the browser option but it would not be nice if the website visitor need to do this manually. So I would like to know how to force the browser to open the PDF in adobe by using some HTML header / javascript / php or any parameter in object tag. Thanks.
<object id = 'zoomPage' type='application/pdf' data= '" + sourceFolder + "SingTao/2013/08/17/0/0/A/Content/pdf/pdf_" + currZoomPageNo + ".pdf#toolbar=1&navpanes=0&statusbar=0&messages=0&pagemode=read'><p>The PDF can not display</p></object>

I know this problem related to the browser behaviour so I would target only :Chrome firefox and IE 9+ (it is ideal if IE8 can also adopt the solution) thanks

How to Force enable, silent updates for Adobe flash in windows 8

How to Force enable updates, silently for Adobe flash in windows 8 using group policy?
I have followed this Article:
http://helpx.adobe.com/flash-player/kb/administration-configure-auto-update-notification.h tml
http://gpyall.com/archives/disable-adobe-flash-updates-on-64-bit-windows-with-group-policy /
This looks promising but not working.
Also, I cannot even manually create a file, in Win 8 (C:\Windows\SysWOW64\Macromed\Flash)
So how would group policy can put mms.cfg in this location with following vaule:
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
Thanks in Advance.

You will find more information in http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/flashplayer/pdfs/flas h_player_11_7_admin_guide.pdf

How to force my Web part to run regardless of users permissions

I have created the following custom permission , which will allow users to Create items without being able to view,edit them:-
$spweb=Get-SPWeb -Identity "http://vstg01";
$spRoleDefinition = New-Object Microsoft.SharePoint.SPRoleDefinition;
$spRoleDefinition.Name = "Submit only";
$spRoleDefinition.Description = "Can submit/add forms/files/items into library or list but cannot view/edit them.";
$spRoleDefinition.BasePermissions = "AddListItems, ViewPages, ViewFormPages, Open";
$spweb.RoleDefinitions.Add($spRoleDefinition);
$spweb.Dispose();
then inside my "Issue Tracking List" i stop inheriting permission from team site , and i define the following permission for all users:-
now users can add items and they can not view them ,, which is perfect :).
But now i wanted to add a custom web part to my Create form which will hide certain fields if the user is not within specific group ,the web part looks as follow:-
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
SPGroup group = web.Groups["Intranet Visitors"];
bool isUser = web.IsCurrentUserMemberOfGroup(group.ID);
if (!isUser)
SPList myList = web.Lists.TryGetList("Issue List");
SPField titleField = myList.Fields.GetField("Category");
titleField.Hidden = true;
titleField.ShowInEditForm = false;
titleField.ShowInNewForm = false;
titleField.ShowInDisplayForm = false;
titleField.Update();
myList.Update();
// web.AllowUnsafeUpdates = false;
else
SPList myList = web.Lists.TryGetList("Issue List");
SPField titleField = myList.Fields.GetField("Title");
titleField.Hidden = false;
titleField.Update();
myList.Update();
// //web.AllowUnsafeUpdates = false;
web.AllowUnsafeUpdates = false;
then i deploy the web part and i add it to the Create form. but after doing so user are not able to create items and they will get the following error:-
Sorry this site has not been shared with you
so can anyone advice how to force my web part to run , without checking the users permissions or with minimal permssions ?

in this case, use the elevated privileges to read/add/edit items with elevated privileges with below code.
but make sure the page which you add this web part have at least read access to all user.
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(web.Site.ID))
// implementation details omitted
More: http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spsecurity.runwithelevatedprivileges.aspx
Bistesh
Ok after adding :-
SPSecurity.RunWithElevatedPrivileges(delegate()
users with the following permissions can create items:-
"AddListItems, ViewPages, ViewFormPages, Open";
and they can not edit/read them, which is great. but i am facing a caching problem , because if user is inside the "Intranet visitor" he will be able to see Category field as mentioned in my code, but if i remove him from the "Intranet Visitor"
he still can see the field,, although in the web part i specify not to display the Category column if the user is not inside the "Intranet visitor " group... here is my current code:-
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
web.AllowUnsafeUpdates = true;
SPGroup group = web.Groups["Intranet Visitor"];
bool isUser = web.IsCurrentUserMemberOfGroup(group.ID);
if (!isUser)
SPList myList = web.Lists.TryGetList("Risk & Issue Management");
SPField titleField = myList.Fields.GetField("Category");
titleField.Hidden = true;
titleField.ShowInEditForm = false;
titleField.ShowInNewForm = false;
titleField.ShowInDisplayForm = false;
titleField.Update();
myList.Update();
// web.AllowUnsafeUpdates = false;
else
SPList myList = web.Lists.TryGetList("Risk & Issue Management");
SPField titleField = myList.Fields.GetField("Category");
titleField.Hidden = false;
titleField.ShowInEditForm = true;
titleField.ShowInNewForm = true;
titleField.ShowInDisplayForm = true;
titleField.Update();
myList.Update();
web.AllowUnsafeUpdates = false;
so can you advice please ? is this a caching problem, or once the user add at-least single item he will be able to see all columns ?

How to force CoreDump in the Kernel source code

Hi,
Anyone know, how to force coredump in the Kernel source code?. And also to collect all information related to CPU Registers, CPU IRAM, Cache Data and complete SDRAM content.

pull your RAM out....
Wouldn't recommend doing that really...... And why would you want to cause a kernel panic?
EDIT: Spelling sucked...
Last edited by crankyadmin (2009-09-28 22:02:14)

How to force digital input sample rate?

Does anyone know how to force a Digital Input sample rate and/or tell Core Audio which conversion clock to use... internal or external? Apparently both things can be done from Pro Tools, but I don't have it. My problem is locking onto an A/D converter's 48K Toslink output. I can set 48K in 'Audio - Midi' setup and the audio is perfect, but a few seconds later Core Audio returns to the default 44.1K. I need to force it to stay at 48K, or clock on the signal rather than internal clock.

Braver,
Let me clarify a few things. First, the 6733 supports correlated digital I/O. This means that the digital operation does not have its own clock. You can correlate the digital operation with the AO clock, which will allow a digital operation up to the max AO rate. You can generate a pulse train with an onboard counter and use that as your digital clock source. Also, you can use a completely external clock source to achieve the max digital rate of 10MHz. The knowledge base, linked below, points you to a couple of examples that ship with LabVIEW. Be sure and read the documentation associated with each example.
Knowlege Base
As for
the example CDI Single Point clocked by Counter (E).vi, notice how the output of...

How to force user to enter supplier/customer name in captial letters in R12

Dear all,
Could anyone pls advise how to force user to enter supplier/customer name in captial letters in R12? Can I do it using OA framework personalization?
HY

Pl post exact versions of OS and EBS.
The ability to do this exists in forms (professional user interface) using forms personalization, but does not exist in the OAF (self-service) interface, AFAIK. See related MOS Doc 399892.1 (Is It Possible To Restrict Employee Name Entry To All Upper Case in the PUI And SSHR ?) for some details.
Pl confirm by opening an SR with Support.
HTH
Srini

How to force spry to render properly?

Similar Messages

Maybe you are looking for