How to forget networks in bulk...?

Lately my mac (latest Mavericks on a late 2008 MacBook) has taken forever to find wifi networks.  My iPhone will connect in seconds to a new network while my mac can sit there searching for 2 minutes or more before it finally find one.
1) What's up with this?
2) My theory is if I remove some of the 1000+ networks that my mac has memorized over the years then this problem will be remedied.
  2a) Is my theory sound?
  2b) removing 1000s of networks is a nightmarishly slow process that requires confirming each one.  Is there a bulk way to do it?

Dear Ansh
no chance. There is no standard approach here. You have to go trhough spec by spec and gen var/language combination. But it is quite common to use "work arounds" (own programming etc:). Check may be: Customer Exits in SAP EHS MANAGEMENT
as a starting point.
C.B.
PS: may be you try to use a "trick"
Check:
Generating Worklists - Product Safety (EHS-SAF) - SAP Library
Subtopic: Report Management Worklist - Product Safety (EHS-SAF) - SAP Library
May be you could try to use this kinde of approach to generate a "worklist" (not sure; never tried it like that)

Similar Messages

  • I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    See if the iPad will accept the password after you restart it. It's worth a try.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You could also try a reset as well.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • How do you reinstate "forget network" when you turn it off

    I turned off "forget network " by error how do i reactinate it so I can get my WIFI back. I am also unable to get my i phone to hook to my network it will not accept my password for my wifi

    Check your wifi password

  • How do i undo 'forget network' on iphone 4

    I clicked in 'forget network' when setting up my wi-fi connection on my iphone 4. Now I cannot access my wireless network, how do I undo this?

    Copied from my previous post.
    Selecting Forget this Network for a wireless network your iPhone has successfully connected with should not prevent the network from being shown as an available network to join and rejoining the network.
    The Forget this Network option on the iPhone is for forgetting or erasing a wireless network on your iPhone that your iPhone has connected with so your iPhone does not automatically connect with the network when returning within range of the network.
    This is not for not having an available wireless network from appearing in a list of available networks to select and join the network. There is no option on a computer or device to prevent an available wi-fi network from appearing to select from when in range of a network that is being broadcast.
    If you don't want to join this network, don't select it, but you can't prevent the network from appearing as an available wi-fi network to join.

  • How do I network my desktop printer with my other MAC laptops? I forgot how to do it in the settings

    How do I network my laptops to my printer? I forget what steps to use in Settings.

    You posted in the iMac (PPC) community.
    You would do better by posting in the "laptop" forum of the model "laptop" that you have.   Your questions has nothing to do w/iMacs (PPC).

  • Can no longer connect to my network and 'forget network' option has disappeared??

    Can no longer connect to my network and "forget network" option has disappeared???  (Ipod touch 5th generation). This happened on both my children's ipods. We have reset network settings but it doesn't help.

    JEM24 , your suggestion is included in:
    - iOS: Troubleshooting Wi-Fi networks and connections
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    JEM24 wrote:
    Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers.

  • How to view errors if bulk collect has thrown errors

    Hi,
    I have few questions.
    1.How to view error whether bulk collect is successful or not
    2.What is identified & unidentified relationships in ERWIN
    3.How to see the errors whether the sql loder is successful or not
    and how to open the log file.Is there any specific command in UNIX
    which tells loader is successful or thrown error
    4.When executing the pl/sql procedure from UNIX.how to check for errors.
    Please provide the answers for this
    Thanks

    Use SAVE EXCEPTIONS clause in your FORALL loop.
    Is this for homework/test?

  • How to configure network virtualization in SCVMM 2012 R2 with two host

    hi everyone... can you teach me how i configure networking in my infrastructure..
    i am getting confuse that i have 2 phisical server, i don't know to set the netwokring in scvmm. Every best practice, i found in internet is using more than 2 physical server.
    i have been tried before with the networking which i want..but it failed...
    any one help me please...

    This whitepaper should explain the required steps to get this working.
    http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
    The whitepaper will use more than two hyper-v hosts, but you'll get the picture.
    You can have 1 host to run your NVGRE VMs, while the other host should be dedicated to run the virtualization gateway VMs.
    -kn
    Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

  • How do I network my Mac book pro with my Mac air?

    Hi - new at this Mac stuff: how do I network my Mac book pro with my Mac air? I am really looking to just share my photos from one to the other.

    Connect them both to the same router.
    They should show up in the left column of Finder under Shared.

  • How to show network status in top toolbar?

    how to show network status in top toolbar? Network preferences is there, but network status has disappeared on last reset of Airport Express, but may not be connected. Thanks in advance for practical help

    Interestingly, in my experience, using the method described above of unchecking the "Show Connected Servers" box in the Finder Preferences makes no difference in what I can put in the sidebar. I was able to move a sub-folder of a shared disk to the Favorites section of the Finder Sidebar, but nothing else. (i.e. I could not add the shard disk itself to the sidebar – either to the devices, favorites, or any other section, and I could only add a subfolder of the shared disk to the favorites section – not to the devices section or any other section). This was the same whether I had "Show Connected Servers" checked or not.
    I'm running OS X Mavericks, and the setup I have is with a previous generation Time Capsule (i.e. the short, square kind that you could buy before the most recent taller variety came out last year), with a LaCie 3 TB USB 3.0 external drive plugged into the USB port of the Time Capsule. I'm then accessing this network drive over WiFi. The differences in what I'm seeing may be due to some change they made in the way Mavericks handles these setups.
    I could also just be misunderstanding what you're saying, but I thought I'd add this in case anyone else gets similar results so that they'd know they're not alone. Let me know if I'm missing something here.

  • How can I perform a bulk assignment to one Task

    Hi All,
    I would like to allow all resources to assign some of their time to a cProjects Task (XXXX Implementation plan). How can I perform a bulk assignment to this task, instead of performing individual assignments?
    Please help.
    Thanks,
    Srini

    Not quite sure I fully understand your question. When you go to the "roles" tab of a task you are allowed to assign multiple resources to a task either from the same role or different roles. The total work or effort for the task can be distributed accross the multiple assignments.

  • How to monitor network load

    hi,
    How to monitor network load i.e. bytes sent/recieved.

    what is your operating system?
    refer the links, hope this may helps you.
    http://hoopercharles.wordpress.com/2010/08/19/network-monitoring-experimentations-7/
    http://www.remote-dba.net/t_tuning_monitoring_network.htm
    http://www.activexperts.com/activmonitor/check/database/oracle/

  • How to create report in Bulk

    Dear Gurus/Experts,
    We changed the templated linked to a report by creating a new version. Now we want all the reports ( MSDS) associated with this template to be updated in version for all the specifications it is linked with so that the chagnes in the new version is used & it's changes are reflected in reports, How can we manually update version of reports in bulk via CG02 if there exists a procedure or how to create reports in bulk. The jobs are failing & we have been asked to do it manually.
    Regards,

    Dear Ansh
    no chance. There is no standard approach here. You have to go trhough spec by spec and gen var/language combination. But it is quite common to use "work arounds" (own programming etc:). Check may be: Customer Exits in SAP EHS MANAGEMENT
    as a starting point.
    C.B.
    PS: may be you try to use a "trick"
    Check:
    Generating Worklists - Product Safety (EHS-SAF) - SAP Library
    Subtopic: Report Management Worklist - Product Safety (EHS-SAF) - SAP Library
    May be you could try to use this kinde of approach to generate a "worklist" (not sure; never tried it like that)

  • How to calculate network bandwidth for dataguard 11.2

    Hi all,
    have a customer who needs to setup a new data guard environment in release 11.2.0.2. Primary site will be in Italy, standby site will be in New York.
    He would like to know the network bandwidth between primary and standby site needed to obtain the maximum performance in redo transport with or without compression option.
    I found a lot of threads and docs indicating some formulas but none of them explained how to:
    - calculate network bandwidth on a rac system (having a single instance standby database)
    - calculate network bandwidth in case of use redo transport compression
    - calculate cpu consumption if using redo transport compression
    Could you please give any advice?
    A.M.

    Hi,
    customer made ma a lot of technical question just like the following:
    - which are the main factors determining the 30% overhead indicated in the network bandwidth calculation
    Required bandwidth = ((Redo rate bytes per sec. / 0.7) * 8) / 1,000,000 = bandwidth in Mbps
    - how much bandwidth will I gain if I apply redo transport compression and why redo transport compression and why usually the gzip utility gives me 5X less and oracle compression gives me a maximum of 50-60% of compression even if it uses the same engine of zlib compression as indicated below?
    Data Guard redo transport compression uses the same zlib compression engine at level 1 as gzip -1. To estimate the compression ratio you can achieve using Data Guard redo transport compression, first compress an archived redo log file with gzip:
    $ gzip -1 <archive redo logfile>.arc
    Then use the gzip --list option to explicitly display the compression ratio:
    $ gzip --list <archive redo logfile.arc>.gz
    Note: Use gzip version 1.3.3 or later. Refer to www.gzip.org for the latest information on gzip.
    Could anyone give me any direction?
    Thank you
    AM

  • How can I pick in bulk in one LPN and drop on the staging by sales order

    How can I pick in bulk in one LPN and drop on the staging by sales order
    I have 25 sales orders
    I need to pick these orders in bulk in one batch (Batch means load all the sales order without existing the scree)
    during drop I need to drop by sales order
    do you have a solution or similar solution for that

    How can I pick in bulk in one LPN and drop on the staging by sales order
    I have 25 sales orders
    I need to pick these orders in bulk in one batch (Batch means load all the sales order without existing the scree)
    to pick all bulk and independent tasks tog ether
    during drop I need to drop by sales order (I mean to collect all the line of the sale order)
    do you have a solution or similar solution for that

Maybe you are looking for