How to format and recover Satellite U500
Hi
I have toshiba satellite u500 1GB ram and windows vista home edition.
I created recovery CD in long back but its damage.
I want to format my system. I try from recovery partition from my laptop but its not work.
Can you help me to formate my laptop from my hard disk recovery partion
favas
Hi
If the recovery partition does not work and if you are not able to use the HDD recovery then you have just only one chance to get the factory settings.
You need to use the Recovery disk.
If the recovery disk is damage then you have to order a new one.
Check the page posted by user above.
PS: you can also use an clean MS Vista or other system disk.
The needed driver are available on Toshiba driver page
Similar Messages
-
Can somebody please explain how to format and then reinstall Mac lion10.7 without cd
can somebody please explain how to format and then reinstall Mac lion10.7 without cd
You will need either an Ethernet or Wifi Connection to the Internet - USB Mobile device is not supported.
If you already have Lion installed you can boot to Recovery with Command R and use the Disk Utility to erase the Macintosh HD and then reinstall the OS from the Mac OS X Utilities.
You will need the Apple Id used for purchase if the Mac did not ship with Lion installed originally.
If you want to repartition the HDD you can use the Recovery Disk Assistant to make a recovery USB drive
http://support.apple.com/kb/DL1433
http://support.apple.com/kb/HT4848
As Always - Back up the Mac before erasing unless you are confident there is absolutely nothing on the mac that you might possibly need later.
If the machine is a 2011 build or later you might be able to boot to Internet Recovery with Command Option R -
How to unsync and recover original contacts and messages to iPhone
How to unsync and recover original contacts and messages to iPhone 4?
Install the Nokia PC Suite on your computer and sync the contacts from the Nokia to the computer, then sync the contacts from the computer to the iPhone via iTunes or iCloud.
-
Mount time machine, how to open and recover .inprogress file
so this is how i fixed and mounted a time machine capsule ( it was extended journaled Case-sensitive) to MacBook Pro ( non-case sensitive) and recovered files from .inprogress file. for me it worked like a charm and lets see if this can help you too.
Found a way to figure it out! (mount drive). So I went to my gf's laptop and created a new backup file for her ( just the file or a new sparsebundle. the info.plist , token and info.bckup are the files that we need from here ). If no mac is available, create a new backup in pc but it has to be to the same time capsule ( the files that we need and create will point and tell the sparse bundle a new path to time capsule ) To het there you go to the sparse bundle Dmg, right click and go to "show contents". So this is how i change it, I open 2 finder windows and got each sparse bundle in it ( old one or damaged and new one), righ click on both > show contents and then replace these files from the new one to the damaged one ( info.plist , token and info.bckup ). That's it. The time machine at least mounted on my desktop and could see the files. Now for opening the .inprogress file; go to Automator >new workflow > and drag in this order; get selected finder items, get folder contents and open finder items. While the .inprogress file i selected, press "run" or play button in Automator. That's it. Now you may try to drag to desktop but it will say "the volume has the wrong case sensitive for a backup" but you should have access. Now for copying or move to somewhere; get another hard drive ( external) and format it to the same as time capsule ( extended journaled case sensitive is my case), once it's done, right click and go to info> at the bottom uncheck "ignore ownership" and close it. Now you can copy from .inprogress file to just formatted hard drive and from hard drive to laptop. Here's the annoying part; it will treat it as a special folder ( when you paste it in you desktop it's gonna ask for password, if you wanna move it somewhere else it's going to do it as well. But at least you can recover the file ) . once this process It's done just reformat your time capsule.
Cheers,well, after you transfer everything to new hard drive and to avoid the putting a password everytime you move the folders, richt click on drive > get info > check again the "ignore ownership" option and you shouldnt have any problems transfering back folders
-
HT3910 How to format and erase Lion 10.7.3 completely?
I've erased and reinstalled my Lion 10.7.3 but after rebooting, all my previous programs are also installed.How do I format and erase my HD completely so I get a clean OS like I had when I bought my Macbook Pro?
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
How to format and make partitions on my G20?
hello
how are you there...I am try to format C: and I want to partitions it to make it smill it is now 80GB I want to make it 20GB, really I hope to answer my Q as followe:
1- format C: with use windows Pro XP.
2- how I change my operator system from XP Home to pro XP
3- how can I partitions my C: from 80GB to 20GB
thanks
Please ASAPHi
If you install the OS using Microsoft WXP full version at the beginning of the installations procedure there is an option who allows you to create the partition C. before the installation starts the partition will be formatted and prepared for the new installation.
You can install what you want. Buy the WXP Professional and install it on your Qosmio. All drivers, tools and utilities for WXP Home and Prof. version are the same.
Make attention about HDD free space for Qosmioplayer. The best tool for HDD prearrangement is a Partition magic. This tool is very powerful. -
HP ENVY- How to format and keep licensed windows?
Hi everybody,
I want to format my computer and reinstall windows though I don't think I ever typed in the license key (it was a year ago though).
when I go to:
right click on my computer -> properties
I have under windows activation the Product ID.
If I write it down is it enough for when I'll format and reinstall the same windows version?
Thanks,
Willy
This question was solved.
View Solution.Hi,
No, the Product Id cannot be used to activate.
If you use OEM installation media ( ie Recovery Discs/Flash Drive ) the activation key is automatically read from the bios chip, however this key will only work for an OEM version and not if you install from a 'retail' installation disc.
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Dear user, can i format and install a fresh copy of Mac OS 10.6.4, with another MacBook CD, because i lost the one that came with mine, thanks.
As you need to be on 10.6 to be able access the App Store to download Lion, either get replacement discs via Applecare (you'll need the MBP's serial number to get the right ones) or get the SL retail disc. I would recommend the Original disc replacement set (assuming they were 10.6) as they carry not onlyApple Hardware Test for your model, but the iLife apps other bundled sftware that isn't on the retail disc.
Once you've installed, and used Software Update to get to 10.6.8, you can then get Lion if you're feeling masochistic. -
How to format and reinstall OS on mbp late 2009
I'd like to format and reinstall operating system for my mbp 15 inch from internet (no startup CD required). What keys I should press when the mbp Startup?
To access the recovery partition, turn the mac on and hold the option key down. http://support.apple.com/kb/HT4718
-
External drive, how to format and partition?
Hey everybody!
I'm about to buy an external drive for my mac. I am reasonably capable on a computer, but I've never done formatting or partitioning so I have two questions:
1) I just want to check that I do not need to buy a mac-formatted drive. A little big of googling told me I could do the formatting myself with Disk Utility, just wanted to double check that that was true.
2) Once I get my external drive, what I want to do is create two partitions within that drive, one for my Time Machine backup and one for random files and movies. I'm not sure how to do that (apparently I might need to pick different formats for each in Disk Utility?) so if anybody could help out that would be brilliant.
Thanks
(if that helps, I have a MacBook Pro with a 512GB hardrive, and I want to buy a 1TB external drive)Hi,
Here is a link that will help you set up your external drive. http://www.cnet.com/how-to/how-to-set-up-an-external-hard-drive-for-use-with-os- x/
You won't need different formats for Time Machine backups and storage space partitions. However, given the size of your hard drive, 500 gb for Time Machine may not be enough. You could buy a separate one for Time Machine, budget permitting.
Check the size of your startup disk, and if it is only 250 gb or less, then 500 gb for Time Machine may be OK, for a while. It will soon fill up, but the older backups will be erased.
Regards. -
Disk repair failed / should I reformat my drive / how to format and restore
I have a MacBook Pro late 2011 model and upgraded to Yosemite. The performance on my MB is ok, but just out of curiousity I ran a disk verify, and was told I needed to reboot, hold down CMD / R and run disk repair. I did so and the repair failed. I was promoted to backup and reformat/restore.
Now, I do backup everything using time machine (not sure though if Parallels image is backed up). I do not however have any install disks for Mac OS.
My questions:
1. Should I even bother reformatting my HD?
2. How do I go about formatting the HD and then re-installing the OS and all of my apps, particularly given that I have no DVD
Any thoughts are appreciated. Thank youIf you have extra external HDD, make clone backup with Carbon Copy Cloner or SuperDuper!, then,
1) boot from external clone backup drive.
2) reformat internal HDD.
3) restore from clone backup drive with Carbon Copy Cloner or SuperDuper!. -
[Forum FAQ] How to format and combine PowerShell outputs
Format the output with “Format-Table” and “Format-list”
Sometimes when we query Powershell cmdlet, we would get ellipses in the result, which is not desirable.
In this scenario, we can use the cmdlet “Format-Table” and “Format-list” to view the entire output:
Get-Service | where{$_.name -like "BrokerInfrastr*"}
Get-Service | where{$_.name -like "BrokerInfrastr*"}|Format-Table –AutoSize
Get-Service | where{$_.name -like "BrokerInfrastr*"}|Format-list
Figure 1: format powershell output
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Thanks, this has been helpful. I have been trying to figure out how the PSObjects work.
I created a function that takes an object and creates a function to create PSObjects
Function Get-ObjectPropertiesFunction
[CmdletBinding()]
[OutputType([string])]
param
[Parameter(Mandatory=$true,
ValueFromPipeline=$false,
ValueFromPipelineByPropertyName=$false,
ValueFromRemainingArguments=$false,
Position=0,
ParameterSetName='Object')]
[ValidateNotNull()]
[ValidateNotNullOrEmpty()]
[Object]$Object
Begin
$Members=Get-Member -InputObject $Object
$ValidPropertyType = @{"{get;set;}"=$True;"{get;}"=$True;}
$ValidReturnType = @{"bool"=$True;"byte"=$True;"string"=$True;"string[]"=$True;
"int"=$True;"int16"=$True;"int32"=$True;"int64"=$True;
"uint"=$True;"uint16"=$True;"uint32"=$True;"uint64"=$True;
[string]$String=""
$String=$String+"Function Get-PSObjectPropertiesFromObject `n"
$String=$String+"{ `n"
$String=$String+" [CmdletBinding()] `n"
$String=$String+" [OutputType([PSObject[]])] `n"
$String=$String+" param `n"
$String=$String+" ( `n"
$String=$String+" [Parameter(Mandatory="+"$"+"true, `n"
$String=$String+" ValueFromPipeline="+"$"+"false, `n"
$String=$String+" ValueFromPipelineByPropertyName="+"$"+"false, `n"
$String=$String+" ValueFromRemainingArguments="+"$"+"false, `n"
$String=$String+" Position=0, `n"
$String=$String+" ParameterSetName='Object')] `n"
$String=$String+" [ValidateNotNull()] `n"
$String=$String+" [ValidateNotNullOrEmpty()] `n"
$String=$String+" [Object]"+"$"+"Object `n"
$String=$String+" ) `n"
$String=$String+" Begin `n"
$String=$String+" { `n"
$String=$String+" $"+"Output = New-Object PSObject -Property ([Ordered]@{ `n"
ForEach ($Member in $Members)
IF ($Member.MemberType -EQ "Property")
[string]$Name=$Member.Name
IF ($Name.Substring(1,1) -NE "_")
[String[]]$Definition=$Member.Definition.Split(" ")
[string]$PropertyType=$Definition[2]
IF ($ValidPropertyType[$PropertyType])
$ReturnType=$Definition[0]
if ($ValidReturnType[$ReturnType])
$String=$String+" $Name="+"$"+"Object.$Name `n"
$String=$String+" }) `n"
$String=$String+" $"+"Output `n"
$String=$String+" } `n"
$String=$String+"} `n"
$String
Here is the output from the above function for the WIN32_BootConfiguration class (Small Class)
$Class="Win32_BootConfiguration"
$Function=Get-ObjectPropertiesFunction (Get-WMIObject -Class $Class)
PS C:\>> $Function
Function Get-PSObjectPropertiesFromObject
[CmdletBinding()]
[OutputType([PSObject[]])]
param
[Parameter(Mandatory=$true,
ValueFromPipeline=$false,
ValueFromPipelineByPropertyName=$false,
ValueFromRemainingArguments=$false,
Position=0,
ParameterSetName='Object')]
[ValidateNotNull()]
[ValidateNotNullOrEmpty()]
[Object]$Object
Begin
$Output = New-Object PSObject -Property ([Ordered]@{
BootDirectory=$Object.BootDirectory
Caption=$Object.Caption
ConfigurationPath=$Object.ConfigurationPath
Description=$Object.Description
LastDrive=$Object.LastDrive
Name=$Object.Name
ScratchDirectory=$Object.ScratchDirectory
SettingID=$Object.SettingID
TempDirectory=$Object.TempDirectory
$Output
PS C:\>>
The function also works for other and more interesting classes like SQL Server.
PS C:\>>
$srv = New-Object Microsoft.SqlServer.Management.Smo.Server("(local)")
$db = New-Object Microsoft.SqlServer.Management.Smo.Database($srv, "AdventureWorks2012")
$Function=Get-ObjectPropertiesFunction $db
$Function
Function Get-PSObjectPropertiesFromObject
[CmdletBinding()]
[OutputType([PSObject[]])]
param
[Parameter(Mandatory=$true,
ValueFromPipeline=$false,
ValueFromPipelineByPropertyName=$false,
ValueFromRemainingArguments=$false,
Position=0,
ParameterSetName='Object')]
[ValidateNotNull()]
[ValidateNotNullOrEmpty()]
[Object]$Object
Begin
$Output = New-Object PSObject -Property ([Ordered]@{
ActiveConnections=$Object.ActiveConnections
AnsiNullDefault=$Object.AnsiNullDefault
AnsiNullsEnabled=$Object.AnsiNullsEnabled
AnsiPaddingEnabled=$Object.AnsiPaddingEnabled
AnsiWarningsEnabled=$Object.AnsiWarningsEnabled
ArithmeticAbortEnabled=$Object.ArithmeticAbortEnabled
AutoClose=$Object.AutoClose
AutoCreateStatisticsEnabled=$Object.AutoCreateStatisticsEnabled
AutoShrink=$Object.AutoShrink
AutoUpdateStatisticsAsync=$Object.AutoUpdateStatisticsAsync
AutoUpdateStatisticsEnabled=$Object.AutoUpdateStatisticsEnabled
AvailabilityGroupName=$Object.AvailabilityGroupName
BrokerEnabled=$Object.BrokerEnabled
CaseSensitive=$Object.CaseSensitive
ChangeTrackingAutoCleanUp=$Object.ChangeTrackingAutoCleanUp
ChangeTrackingEnabled=$Object.ChangeTrackingEnabled
ChangeTrackingRetentionPeriod=$Object.ChangeTrackingRetentionPeriod
CloseCursorsOnCommitEnabled=$Object.CloseCursorsOnCommitEnabled
Collation=$Object.Collation
ConcatenateNullYieldsNull=$Object.ConcatenateNullYieldsNull
DatabaseOwnershipChaining=$Object.DatabaseOwnershipChaining
DatabaseSnapshotBaseName=$Object.DatabaseSnapshotBaseName
DateCorrelationOptimization=$Object.DateCorrelationOptimization
DboLogin=$Object.DboLogin
DefaultFileGroup=$Object.DefaultFileGroup
DefaultFileStreamFileGroup=$Object.DefaultFileStreamFileGroup
DefaultFullTextCatalog=$Object.DefaultFullTextCatalog
DefaultSchema=$Object.DefaultSchema
EncryptionEnabled=$Object.EncryptionEnabled
FilestreamDirectoryName=$Object.FilestreamDirectoryName
HonorBrokerPriority=$Object.HonorBrokerPriority
ID=$Object.ID
IsAccessible=$Object.IsAccessible
IsDatabaseSnapshot=$Object.IsDatabaseSnapshot
IsDatabaseSnapshotBase=$Object.IsDatabaseSnapshotBase
IsDbAccessAdmin=$Object.IsDbAccessAdmin
IsDbBackupOperator=$Object.IsDbBackupOperator
IsDbDatareader=$Object.IsDbDatareader
IsDbDatawriter=$Object.IsDbDatawriter
IsDbDdlAdmin=$Object.IsDbDdlAdmin
IsDbDenyDatareader=$Object.IsDbDenyDatareader
IsDbDenyDatawriter=$Object.IsDbDenyDatawriter
IsDbManager=$Object.IsDbManager
IsDbOwner=$Object.IsDbOwner
IsDbSecurityAdmin=$Object.IsDbSecurityAdmin
IsDesignMode=$Object.IsDesignMode
IsFederationMember=$Object.IsFederationMember
IsFullTextEnabled=$Object.IsFullTextEnabled
IsLoginManager=$Object.IsLoginManager
IsMailHost=$Object.IsMailHost
IsManagementDataWarehouse=$Object.IsManagementDataWarehouse
IsMirroringEnabled=$Object.IsMirroringEnabled
IsParameterizationForced=$Object.IsParameterizationForced
IsReadCommittedSnapshotOn=$Object.IsReadCommittedSnapshotOn
IsSystemObject=$Object.IsSystemObject
IsUpdateable=$Object.IsUpdateable
IsVarDecimalStorageFormatEnabled=$Object.IsVarDecimalStorageFormatEnabled
LocalCursorsDefault=$Object.LocalCursorsDefault
MirroringPartner=$Object.MirroringPartner
MirroringPartnerInstance=$Object.MirroringPartnerInstance
MirroringRedoQueueMaxSize=$Object.MirroringRedoQueueMaxSize
MirroringRoleSequence=$Object.MirroringRoleSequence
MirroringSafetySequence=$Object.MirroringSafetySequence
MirroringTimeout=$Object.MirroringTimeout
MirroringWitness=$Object.MirroringWitness
Name=$Object.Name
NestedTriggersEnabled=$Object.NestedTriggersEnabled
NumericRoundAbortEnabled=$Object.NumericRoundAbortEnabled
Owner=$Object.Owner
PrimaryFilePath=$Object.PrimaryFilePath
QuotedIdentifiersEnabled=$Object.QuotedIdentifiersEnabled
ReadOnly=$Object.ReadOnly
RecursiveTriggersEnabled=$Object.RecursiveTriggersEnabled
TargetRecoveryTime=$Object.TargetRecoveryTime
TransformNoiseWords=$Object.TransformNoiseWords
Trustworthy=$Object.Trustworthy
TwoDigitYearCutoff=$Object.TwoDigitYearCutoff
UserName=$Object.UserName
Version=$Object.Version
$Output
PS C:\>> -
External hardrive to use with Imac - how to format and to what?
i have my external hardrive i use with my pc
how and to what should i format it so i can use ut with leopard and timemachine, also is it possible to make 2 partiton on it so one partition
would still be windows format so i can backup windows on it too?If you have an Intel Mac do this:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the drop down menu to two and resize as desired using the sizing gadget. Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the PC volume you just created (this is a sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window. Set the format type to MSDOS (FAT32) from the Format drop down menu. Click on the Erase button.
5. Select the OS X volume you just created (this is the other sub-entry under the drive entry) from the left side list. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
You should now be able to use the drive on both platforms. One partition for OS X and the other for Windows. -
How to format and devide HD of my Satelitte M40?
Dears at toshiba
i have M40 Satlitte lapTop with One Partition and i want to For format it and devide it to 3 partitions One for Win98 ,one for Win XP SP2, and one for my data
how to do that ..since all i have is Product Recovery DVD-Rom
thnks in advanceHi
In this case I would recommend to use the Partitions Magic 8. This program is very nice a easy to use. You can create different partitions for different usage.
http://www.powerquest.com/partitionmagic/
If you want to check how this program works, there you can download a free demo version of this tool:
http://www.softpedia.com/progDownload/Partition-Magic-Download-2118.html
Bye -
How to format and reinstall 10.6.8 without disk
How to re-format my HD and reinstall 10.6.8 without a disk?
Can't be done. You have to either call AppleCare if you lost the original discs, call the seller of the machine if it wasn't Apple and say the discs belong to the machine and have them call AppleCare if they lost the discs. If clone your hard drive with Superduper or Carbon Copy Cloner upon purchasing a Mac with 10.6 you can always restore the clone at anytime. And before considering upgrading, note 10.7 and above lack Rosetta:
https://discussions.apple.com/docs/DOC-2465
https://discussions.apple.com/docs/DOC-3761
Macs newer than March 15, 2010 can't use the retail 10.6.3 installer, and must use the 10.6 installer that was pre bundled with them to install 10.6, if not a clone, and if pre bundled with some version of 10.6. Prebundled with 10.7 Macs can't install 10.6 unless their actual hardware refresh date preceded 10.7's July 20, 2011 release.
Maybe you are looking for
-
Installation problem with Photoshop Elements 10 and Premiere Elements 10
I purchased in a package Photoshop Elements 10 as well as Premiere Elements 10. It comes with 5 disc....When I install the first disc it does not ask for the 2nd disc once the first disc is done. When the first one was done the option was hit finis
-
Internal ITS - service CATW not running
Hello Experts, I want to migrate from external ITS to the internal on ERP2005. The internal ITS seems to work, at least service webgui looks ok. What I need most is the CATW (timesheet) service. I have published it in SE80, in SICF I have added sever
-
I have both cd and dvd burning drives, and ever since I first installed arch they've been innaccesable, and their contenst invisible. Two cd drives (one too many) and a dvd drive are listed in /media, but I can't see any of their contents. Something
-
my angry birds showed an update so i did, when it finished i cannot play it now, when try to play the welcome screen comes up and then after a few seconds turns black and then the phone returns to normal
-
How do I find someone who can create an app for me for my palm? I am an ob/gyn who is trying to find someone to create a specific type of OB calculator. Thanks, storkdoc Post relates to: Pre Plus p101vzw (Verizon)