How to format ipod classic (7th gen)?

Windows 7 computer recognizes my iPod classic 160GB, but iTunes doesn't recognize it. It's new, and I'm thinking it needs to be formatted. Any advice?

Bear with me, if these have been tried, but at least you didn't say that you have tried everything.
iPod Not recognised by Windows
If you are using Windows, I would suggest reinstalling iTunes, this would repair any corrupted Apple Mobile Device driver that is required for iTunes to interface with USB devices.
After Re-installing, reboot your PC.
Disconnect the PC from Internet
Stop your Antivirus
Reset your iPod - Press Menu and Center Button for about 10 secs till the Apple logo comes ON then release the buttons. Select you language.
Connect your iPod to a high power USB 2.0 Port and not to any USB hub. (if you using a Mac, not on the Keyboard USB port)
What do you see on the iPod Display - should be sychonisation  for a few secs then do not disconnect screen.
if iTunes comes up restore it.
After restore - Start back your antivirus and connect the Internet.
If this doesn't work, refer to this link on do a disk diagnostic by tt2 to chack the health of your hardisk.
https://discussions.apple.com/message/17028567#17028567
if you hardisk is still healthy then do reformat your Hardisk.
http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
Have a nice day!

Similar Messages

  • I recently bought a used iPod Classic (7th Gen) and want to set it up in iTunes in my name.  How do I do this?

    I recently bought a used iPod Classic (7th Gen) and want to set it up in iTunes in my name.  How do I do this?

    Click here and follow the instructions.
    (120421)

  • Ipod classic 7th gen. Songs are not showing on ipod but they are on it ( Got the new itunes) Is the new itunes not compatible with ipod

    I got a ipod classic 7 th generation. I put songs on it ( and it shows  on my mac that the songs are on the ipod (Songs from cd's) when I disconnect my ipod the songs are not showing on the ipod (but they on it) except one song that I purchased on itunes (this songs shows on the ipod)  I got the new itunes and OS X Lion 10.8.5 on my Mac. Is the new itunes are not compatible with the ipod classic 7th generation?
    please I need help.
    THank you so much

    No backup is not good.
    You can transfer itunes purchases from an ipod.  File>Transfer Purchases

  • Reading smart data diagnostics for ipod classic 7th gen?

    Can anyone explain to me the rundown of how to read the Smart Data of a 7th generation iPod Classic?
    Retracts     1
    Reallocs     0
    Pending Sectors     0
    PowerOn Hours     49
    Start/Stops     2639
    Temp current     30c
    Temp Min 53c
    Temp Max     253c
    Thank You!

    Sorry, not much expert here on SSD mods, you may get better response in the iPod Mod forum.
    It has a lot of posts on successful SSD swaps and also some nasty experience on SSD which does not work on some iPod.
    Read through the forum and learn together with them, and avoid frustration of getting an expensive SSD, which the iPod firmware can't recognise, and also there is not enough voltage to power up those old SSD using 5volt rails, iPod hardisk uses 3.3volts rails.
    Good Luck!.

  • My iPod classic 7th Gen  will not sync with my new computer. itunes is installed and updated.

    fellow iPod classic owners,
                                           the problem is a failure to sync with the new computer. the conditions are as follows: the new computer is a pc. it has the latest iTunes software installed. the iPod is installed properly. i'm fully recognized by my iTunes account. there is nothing lacking other than my iPod's refusal to sync with my new computer. what have i left undone? i could be suffering from a duh, but i'm not the only one. nothing in the apple world is as difficult as this one is, at least on the surface. if it were that simple an issue, no one would be having any problems with it. any more information needed can be provided by request. by the way, the computer being used has been authorized. that is a non-issue.
                                                                                                                 your help is appreciated,
                                                                                                                     hardphil.

    I believe the IPOD (Classic) uses USB 2.0,  and my new laptop uses USB 3.0.  I think they are not compatable because of this.  If you find a solution to this please let me know.
    Thanks,

  • IPod Classic 7th Gen Docking Compatability

    I have a brand new iPod Classic 160GB with latest software version (2.0.5 PC) that is barely a week old. I have been trying unsuccessfully to get it to work properly on both the NAD VISO 1 speaker dock and the B&W Zeppelin Air (both also brand new - purchased for the iPod). The iPod docks OK with both, but the playback doesn't work properly with either one and it's frustrating the $@!^*!! out of me.
    VISO 1: I have the latest firmware version on the unit and have been in contact with NAD. After confirming that I have latest firmware, they decided the unit was defective so I returned it for a brand new replacement. The replacement has the latest firmware as well and behaves the same way. The iPod will play back normally for awhile (length of normal playback is very variable) but eventually when it come to the end of a song, it just stops playing. The iPod screen still show's the unit in "play" mode, but there is no progress on the song time bar (stays at 0:00) as if it was paused. When this happens, the unit no longer responds to the remote. I can manually pause/play the iPod directly, but it does not progress. If I undock the iPod with it still showing "play" it immediately begins playing once disconnected from the NAD. Re-docking it causes it to freeze in place again. The only way to recover the NAD is to power cycle it. Once power cycled it will play normally for awhile before locking up again - as frequently as after every song. I have an older iPod Classic 80GB running firmware 1.1.2 (which is the latest for that unit) which behaves exactly the same way as the newer iPod on the VISO.
    It seems highly unlikely that 2 separate brand new units would be defective in an identical fashion and seems more like a compatibility problem. I offered to communicate directly with the engineers so they could look at it and hopefully make a firmware fix, but according to NAD, the engineers tested a 160GB iPod there and were unable to reproduce the behavior. The NAD sounds great and I really want to make it work, but I can't accept it if this can't be fixed.
    B&W Zeppelin Air: Decided to try the B&W since the NAD doesn't want to work right. First thing I did was upgrade it to latest firmware. Could not get it to play with the iPod at all. It connected (battery icon showed it as plugged in) but wouldn't play. I could start play manually on the iPod - and unlike the NAD it WOULD begin playing, but no sound came from the speaker. I tried with the older iPod, and it played perfectly - and sounds outrageously good too. I went back to the 160GB and still couldn't get it to play. After some trial and error, I finally discovered that if I skipped forward or backward a couple tracks, it would finally completely connect and begin playing - but the playback speed is slow. Being the holiday, I have yet to hear back from B&W.
    I'm very frustrated. Both of the units sound amazing when they play, but if I can't get them to work right they are worthless.
    Any help would be greatly appreciated

    Sorry, not much expert here on SSD mods, you may get better response in the iPod Mod forum.
    It has a lot of posts on successful SSD swaps and also some nasty experience on SSD which does not work on some iPod.
    Read through the forum and learn together with them, and avoid frustration of getting an expensive SSD, which the iPod firmware can't recognise, and also there is not enough voltage to power up those old SSD using 5volt rails, iPod hardisk uses 3.3volts rails.
    Good Luck!.

  • ITunes 11.1.4 (Win 7) suddenly thinks my iPod Classic (7th gen) is a new iPod

    My iPod Classic has worked fine since I got it last year with my laptop, but suddenly when I plug it in now iTunes says "welcome to your new iPod". The iPod itself plays fine and all my music is intact. But I now can't play it through iTunes or manage my playlists.

    I believe the IPOD (Classic) uses USB 2.0,  and my new laptop uses USB 3.0.  I think they are not compatable because of this.  If you find a solution to this please let me know.
    Thanks,

  • Ipod classic 7th gen stuck.

    hello. i got this ipod brand new from best buy two weeks ago, it worked fine until 3 days ago. i went to sleep and when i woke up the ipod was wiped, everything worked theyre was just no music, pics, etc and my settings were erased, i decided i was going to wait until i got my macbook pro to restore the ipod, yesterday i got the macbook and it said my ipod is corrupt so of course i restored it, halfway through restoring i get an error message (i forget what it was) and i decided ill look into it tomarrow. after trying to get my itunes to recognizing it today it failed. when i plug the ipod in itunes just gets the spinning rainbow ball where my mouse should be for about 5 seconds and then nothing shows up or happens. on the ipods side when i turn it on unpluged it says connect to itunes, when i plug in it gives me a screen that says do not disconnect and if i do disconnect it gets a ready to disconnect screen, at both of these screens it is still responsive meaning if i lock it a lock logo comes in the corner. i have tried restoring it around 10 times, i have tried puting it into disk mode in which it just says "disk mode" at the top of the do not disconnect screen. after putting it through diog mode or whatever i got this
    Retracts: 5
    Reallocs: 80
    Pending Sectors:80
    PowerOn Hours: 46
    Start/Stops: 805
    Temp: Current 34c
    Temp: Min 15c
    Temp: Max 57c
    i dont know why my reallocs and pending sectors are so high as this problem occured from nowhere. i have dropped it before but not the day that problems occured. if you know anything or ways to help i would appreciate it. if my ipod is totally unfixable its not too terrible since i have insurance/warrenty with best buy but i would like to have a working ipod asap.
    oh and before i had this mac i had a windows computer. thank you.

    picz

  • Formatted Windows iPod Classic 3rd gen sync with Mac iTunes?

    I have a iPod Classic 3rd gen 10gb formatted for windows running version 2.2 and iTunes on Mac version 10.6.3. I want to sync the ipod to itunes via usb to 30 pin cable but itunes does not recognise the ipod. Is there any other way for me to sync the ipod with itunes?

    Is this the same cable you used to plug the iPod into the PC?
    I thought the 3G iPod had to be synced with the appropriate FireWire cable.
    B-rock

  • How can i connect my ipod nano 7th gen to my car?

    Hi, how can I connect my ipod nano 7th gen to my car with bluetooth? Since I only have onstar device on my car but no bluetooth device, do I need to buy extra device to connect my ipod ? And what kind of device I shall choose? Thank you!

    Check with the manufacturer of your radio and see if they have a compatible cable.

  • Does the iPod Classic 7th generation support movies in the HD format?

    Does the iPod Classic 7th generation support movies in the HD format as well as SD or just SD?

    No, the max resolution for video playback is generally 640x480, as stated in the specs
    http://www.apple.com/ipodclassic/specs.html
    The screen is actually half of that resolution, at 320x240.  HD at 720p is 1280x720.  HD at 1080p is 1920x1080

  • When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

    When I connect my iPod nano 7th gen. to my computer and open itunes, there is a message that says the iPod could not be detected. Does anybody know how to fix this issue?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4. Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job.
    7. Check for third-party software conflicts.

  • How can I lock the screen on ipod nano 7th gen?

    How can I lock the ipod nano 7th gen? Just pressing the top button doesnt cut it as it still starts to play music or pauses or change volume with the slightest knock im in 2 minds to take it back if you cant lock it as ive only had it 4 days and already found this a huge problem!

    Hi! I really couldn't find no way to lock the screen, except pressing the top button (what only cancel any touch you do in the screen).
    That's an old discussion about (failure vs feature), but I wonder about if you are running, you can let the screen locked and still change or pause the song by pressing the buttons on the side of the iPod)
    hope I could help you

  • How do I copy my library from my ipod nano 7th gen  to my new computer. My purchased songs are available on itunes but any musici downloaded from cd's to my ipod are not

    How do I copy my own cd songs from my ipod nano 7th gen to my new computer?

    See this older post from another forum member Zevoneer covering the different ways to do this.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • How can I sync my ipod classic 4th gen to new itunes

    I updated iTunes and now I can't sync my ipod classic 4th gen.

    Start with this article: iPod: Appears in Windows but not in iTunes

Maybe you are looking for