How to formate with recovery drive or CD.

5CG3192D3V

Maybe see if this link helps?
How to Perform an HP System Recovery
Troubleshooting HP System Recovery Problems (Windows 8)
Performing an HP system recovery (Windows 8)
Performing an HP system recovery (Windows 7)
How to Perform an HP System Recovery
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

How to format a USB drive to FAT 16 on Mac OS X 10.7?

How to format a USB drive to FAT 16 on Mac OS X 10.7? Disk utility does only FAT32 formatting.

I assuming you really need FAT16 for some external requirement, otherwise why not FAT32??
See this for formatting an SD card to FAT16 via Terminal commands.
The same procedure should work for any USB drive. YMMV.
iPartition will also format FAT16.
I don't know if the free version wiill do it.
Steve

How to Format Toshiba Hard-Drive for Mac with Parallels?

Hello,
I recently bought a Toshiba Hard-Drive with the following features:
500GB
It is a Canivo Basics 3.0
It is USB 3.0 and 2.0 portable hard drive
It has already been formatted NTFS for Windows XP, Vista, 7, and 8
The box says that it can be reformatted for Mac
I have a Macbook Pro with Retina Display that I bought this year in late March/early April.
It runs OS X Mavericks, and Parallels Desktop 9 for Mac.
I would like to reformat it so that I can use it on my laptop both with Windows and Mac OS at the same time. I do not wish to use a partition as I want to access the hard drive through Mac and Windows at the same time on my laptop and I also want to be able to access the Mac things on a Windows computer and vice versa.
I have never formatted a hard drive before, and I would like to use a completely safe software, or no software at all, if it is possible.
I am sorry but I don't have a very high knowledge of this.
Thanks,
Sandy-Wood

It would be easier, using Parallels, just to format the drive for "Mac OS Extended (Journaled)". You can see it both in the Windows/Parallels and the Mac side. Leaving it formatted as NTFS is not going to allow you to access (write to) the drive unless you use third-party software. Formatting it for Mac lets you use it, as I said, on both the Parallels VM and the Mac side.
If you were using Boot Camp, I would advise leaving it formatted as NTFS and purchasing NTFS for Mac to access the drive on both OS's. You can mitigate that by formatting the drive for Mac:
Good luck,
Clinton

How to format new hard drive for Apple TV when you can't use old HD

I need to know how to format a new HD to install in my Apple TV where I can't use the old HD to clone or otherwise create the new structure on the new HD.
I have an Apple TV that was syncing to a Mac Mini that had a defective HD and logic board. I was unable to backup the Apple TV to the Mac Mini for some time before I had the mini repaired by AppleCare.
When the mini came back, it registered on the Apple TV as a new computer and I couldn't sync with it without losing hundreds of dollars of content.
All was okay until the other night when Apple's defective update for the ATV erased ALL my content. I updated it to 3.1 this morning, which Apple indicated might fix the problem. It didn't. The old content is all gone.
My ATV is out of warranty, so I removed the old HD and copied the files from the "Purchased" folder to my mini. That saved most 101 items that I purchased since 12/08 (but not all for some reason). I lost all content prior to 12/08 that I purchased, as well as some content since 12/08 that I purchased.
I need to keep the old HD untouched until I can purchase data recovery software. I'd like to just put a spare IDE HD in that I have into the ATV and just start over with what is in my Mac mini iTunes.
So, how does one do that? I'm not gifted with vast Unix knowledge or experience and I don't want to clone the old HD and risk losing more data if it writes to the HD for some reason.
Thanks.

Hi Atagahi,
Firstly, have you emailed Apple iTunes support indicating your issue? There have been instances in which Apple will allow re-downloading of all content you've purchased on the iTunes store.
Secondly, I highly recommend you get an external usb hard drive, attach it to your mini and use it as a Time Machine drive to keep your iTunes purchases safe. It's a fact of life that all hard disk drives will eventually fail. The Apple TV should never be used as any kind of permanent storage space; think of it as a 'temporary holding' zone. And as you've unfortunately already experienced, a glitch wiped out all content on the Apple TV.
As regards your original question, it seems like there have been folks who've done just that...taken the internal drive in the Apple TV out and attached it to a mac and copied files from the Apple TV hard drive. I have not had to do such, so I cannot offer any help here except for Linda's suggestion on googling the net for solutions.
Good luck and hope you get all your purchased content back Atagahi!
Message was edited by: Alec

Mac novice needs to know how to format an external drive

How do I format a memory stick or external hard drive? I remember in PCs you could right click and click on format.
Thanks!

In OS X, there's an app called Disk Utility that allows you to do whatever you want with hard drives and external drives.
In order to format an external drive, read > http://pondini.org/OSX/DU1.html The Pondini's site guides you through the steps, so you just have to follow them. Unfortunately, it's not as easy as right-clicking the external drive

Transfer photos from PC to Mac - how to format ext hard drive?

Hi, I'd like to transfer jpegs from my old PC to my new Mac. I had already put my files on an external hard drive but when I plugged it into the Mac, it couldn't read it. I got a prompt to re-format it, which I did not do.
From reading discussions here, it looks like I first need to format a hard drive on my Mac, then copy the files from the PC, then transfer to the Mac? But the explanation is over my head - could anyone explain how to do it in plain terms? Thanks so much!

Hi there, if you want both OS's to read the external drive, format it as FAT32. I would do this from your PC as I have had problems with a PC not being able to read a drive formatted by the MAC. There are also other alternative. Or there is a third party alternative called Macfuse using the NTFS-3G plugin.
It is a free opensource project that allows your MAC to read and write to a NTFS drive. So you could actually connect your PC's drive to the Mac and get whatever you need or add.
Hope this helps,
Glynn

How to format a flash drive on my mac book pro

I have a mac book pro, but at school they just use PC's. I need to be able to save my homework on my flash drive at home and bring it into class and open it up on the PC. The programs I am using are the Adobe Creative Suite (photoshop, illustrator, dreamweaver,etc.) and they will let you go back and forth between the mac and the PC. The problem is that I used my flash drive to save my homework, no problem, but after a while it didn't work anymore.
I was told at school, I needed format my flash drive(when it was new) on my mac and then it would be fine to go back and forth. My old flash drive that is messed up, they said just to re-format it on the mac and then it would be fine. How do you do either of those things? Sorry this is so wordy.

Does the older flash drive work on a PC still, cec? If not it may simply be defective. Flash drives can live a hard life!
You shouldn't need to reformat your new stick. I very much doubt that the failure of the old one has anything at all to do with the fact that it wasn't formatted on a Mac .
What OS are you using, by the way? Your various posts seem to say different things.
Just by the way many smaller/older memory sticks will be formatted as FAT-16 rather than FAT-32. Disk Utility , from memory , will actually automatically do this if the drive is under a certain size.
see http://en.wikipedia.org/wiki/FileAllocationTable#Future :
+FAT is still the normal file system for removable media (with the exception of CDs and DVDs), with FAT12 used on floppies, and FAT16 on most other removable media (such as flash memory cards for digital cameras and USB flash drives). Most removable media are not yet large enough to benefit from FAT32, although some larger flash drives, like SDHC, do make use of it. FAT16 is used on these drives for reasons of compatibility and size overhead.+
Cheers
Rod
Message was edited by: Rod Hagen

Don't know how to format external hard drive

dont know how to format my new external hard drive can anyboby help me not very good with computers thanx

http://osxdaily.com/2012/01/04/format-an-external-hard-drive-or-usb-flash-drive- for-mac-os-x/
http://reviews.cnet.com/8301-13727_7-57600320-263/using-external-drives-to-save- space-on-your-mac-format-them-first/
http://pondini.org/OSX/DU1.html

How to format your hard drive

How do I for mat my hard drive

Before doing anything why do you need to format your hard drive?
Drive Erase for Snow Leopard and Earlier
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select the volume you wish to format from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Drive Erase for Lion/Mountain Lion
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select the volume you wish to erase from the left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.

How to format an external drive for mac AND pc use

i want to format my external drive so i can use it on my mac and on pc's as well. i've gathered that the MS-DOS format is the way to go. my question is this: would this create any problems for my mac then?
can i partion one part for ms-dos and part for macos extended?
cheers
-j-

MS-DOS format (or FAT32) will be fine for both Mac and PC. However there is a 4GB file size limit with FAT32.
You could use a dual partition, however the HFS+ partition would not be readable by the PC unless you installed the third party MacDrive.
Look at this page for more information on a dual partition drive for Mac and Windows.
http://macosxhints.com/article.php?story=20030613121738812
iFelix

How to deal with the "driver not installed" message?

My issue, and it seems many others here have it too, is how to install a printer driver in the face of the "driver not installed" message.
In my case, it's an HP4160 Rendevous printer. I've deleted the com.apple.print files in the Library, reinstalled the software, made sure that BDC package, or whatever it's called is installed, even downloaded and run the printer fix software from Fixamac.
Nothing works.
I have the feeling this isn't a printer or driver-specific issue, but is an OS problem. Does anyone have a suggestion?

It appears the Deskjet 4160 will not work with an Airport. Connected via USB, the driver installs normally and the the printer appears to run just fine, although I haven't done much with it yet.
It simply will not work on a wireless network through an Airport. Frustrating, but workable by bringing the laptop to the printer.

How to Copy USB Recovery Drive back to accidentally deleted Recovery Partition Windows 8

I was Creating USB Recovery Drive for my Windows 8.1 and Then I accidentally got my Recovery Partition deleted.. Now I want to restore RecoveryPartition back on my Hard drive. Provided I have the Recovery Data on USB Recovery Drive.. Now what should I do? Please help.

If you've made a Dell Backup and Recovery USB you can restore all the factory partitions:
http://dellwindowsreinstallationguide.com/dell-backup-and-recovery-1-8-1-71/

Problem with Recovery Drive (Q:) --- PLEASE HELP

Hello All,
Some important files of my T410 Recovery Drive Q: (LenovoQDrive.exe, autorun.inf,...) were deleted by an anti-virus, and now the icon of this drive has change and is similar to other drives; also it does not open whit double-clicking. Can anybody send me these files or have another solution?
Thanks a lot!

Hey you should firstly make recovery media using R&R tool. You will see, if this tool is able to do it (then Q is OK) or not. And if it is able to make recovery media, then you can just delete Q partition, because you can recover anytime using or recovery media, or regular backup image.
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

How to format an external drive used for time machine

My 150 Gig external hard drive showed too full for a time machine backup. It only showed 20 gig left. So I moved the time machine backup on it to the trash to make room for a new one. This did nothing. With the files in the trash the drive still shows full even though it has no time machine backup on it.
So I would like to know how I can format this drive again to get it to accept a brand new time machine backup. Or how do I get time machine to recognize the drive as empty instead of full.
I now know I should have at least a 500 gig drive to let time machine make it's plethora of backups. But the 150 gig drive is what I have right now to backup an 80 gig hard drive and I would like to start from scratch.
Thanks,
JJ Bula

With the files in the trash the drive still shows full
You need to empty the Trash before anything is actually removed from the drive.
If you want to completely erase the drive, launch Disk Utility, select the drive, go to the Erase pane and click "Erase".

HOw to format a thumb drive

All to often I find transferring files between pc and mac - the mac reckons I don't have any room left but there's very little stored on the thumb.
eg: I have a 2g thumb drive with 1 small spreadsheet on it - I'm trying to copy a 1g file to it and OSX says 'not enough space'.
How do I get around this issue?
Thanks,
Brad.

Have you placed other files on the drive that you then put in the trash? If you didn't empty the trash, then those items are still taking up space.
Whether it's formatted for Mac or FAT32, it should have no trouble with a 1 GB file.

How to formate with recovery drive or CD.

Similar Messages

Maybe you are looking for