How to forward port to internet with Time Capsule

I'm using a Buffalo Technologies Linkstation to provide web access to my files from remote locations. I need to forward TCP port 9000 to the Linkstation's IP address which ia 100.0.1.196. Can anybody explain how to do that in the Apple utility?

Launch AirPort Utility, select your device and click manual setup.
Select the INTERNET pane, and then select the NAT tab.
From here, click the CONFIGURE PORT MAPPINGS button.
Click the + at the bottom of the window, choose the appropriate service, enter the ports you need to forward, enter the correct IP address and so on.
Click CONTINUE at the bottom to set up a name for this service (just something to tag it so you know what it is later) and you should be all set. The utility will prompt you to reboot your Time Capsule when you're all done.

Similar Messages

How can I Bkp my Iphone with Time Capsule?

How can I Bkp my Iphone with Time Capsule?

No, you will have to re-create the playlists manually on the computer. Did you somehow delete your iTunes Library and the content that exists within that library? If you attempt to sync the phone with an iTunes Library that does not have all the content that the phone has, then the content on the phone will be replaced with the content from the computer.

How do I use airport utillity with Time Capsule(or any airport extreme) over the internet without mobile me? iCloud has disabled this function?

How do I connect to my Airports/time capsules over the internet using the mobileme function under icloud?

i want to do the same. i tried entering my @me.com account and does not work, but if I tried to go to icloud.com and using my @me.com works
why?
does the Airport express needs to be upgraded as well

No internet with Time Capsule

I cant get internet through my time capsule. When i run network diagnostics, the network status says that:
Airport, Airport Settings, Network Settings and ISP are fine, but the Internet and Server have failed.
I use a cable modem from virgin media.

gareth1962jones wrote:
I've just installed time capsule with one airport extreme - which is all working fine except that I now can't get into the internet: somehow, I've ended up with two wifi networks - a new one one that the Time Capsule works with but no internet and one that connects me to the internet but not Time Capsule (the wifi network I had beforehand)
I've connected my original wireless modem to the Time Capsule via an ethernet cable. Airport utilities tells me this cable is not connected so I suspect the problem is something to do with that.
Do I need a wireless modem at all with Time Capsule?
Unless you expect problems with range, you might try replacing your AirPort Extreme with the Time Capsule. There are ways to get them to work together, but you'll probably be happier and have less hassle just doing the replacement.
I'd start by using the "Manual Setup" option of AirPort Utility to do a "File -> Save A Copy As..." of your existing AIrPort Extreme configuration. Then connect the Time Capsule in its place and use "File -> Import..." to bring your old settings into the TIme Capsule. There are probably some things you'll need to tweak, but the old settings will at least get you going in the right direction.

How can I disable SSID broadcast with Time Capsule?

I have always disabled the SSID broadcast with other devices. It is a big help with securing the networks. Can this be done with Time Capsule? If yes, please tell me how.
Thanks.

I have always disabled the SSID broadcast with other devices. It is a big help with securing the networks. Can this be done with Time Capsule? If yes, please tell me how.
You can by turning on hidden network.
Open the airport utility .. click on your TC, and then edit.. go to the wireless TAB. Click on wireless options. Click Create hidden network.
Let me add in modern world.. it is totally useless. A person can see your hidden network using any standard wireless analysis software. It adds no security at all.. and WPA2 Personal with a decent password 10-20 characters mix of upper and lower case plus numbers is still solid.. add more characters if you are paranoid.. but honestly hiding SSID does nothing.
http://www.howtogeek.com/howto/28653/debunking-myths-is-hiding-your-wireless-ssi d-really-more-secure/
If you did not know it is not part of the IEEE wireless standard.. it therefore often leads to problems with clients.
There are many other reasons given in the article above..

How can i connect plex app with time capsule

i have a time capsule 2TB and iphone 5s and ipad mini 2
i stored all my movies on the TC and i can acces them by imac and apple tv
i just bought plex for ipad and iphone and don't now how to connect to TC
i want play these movies by ipad by plex connected to TC but don't know how to
please help

i just don't know to acces the TC with the plex app i tried several thing like port forwarding but can't figure it out
The plex app is a client.. you must be running a plex server in your network..
https://plex.tv/ios
Since the Apple Time Capsule cannot host any media.. since it has no media extensions it is impossible to support plex server on it. You must run a plex server on a computer or intelligent device.. TC doesn't rate as it is a fixed router with nothing to help you.

Gigabit internet with Time Capsule

Hello!
Need help, can not resolve it, google says nothing)
- I have previous generation Time Capsule (white and flat, don't know how to define it more clearly)
-I have gigabit internet connection
-when Time Capsule is configured to BRIDGE mode, all is Ok. Tests say I have 700-800 mbps connection. So, there is no problem with connection,
no problem with hardware or cables.
-when I configure TC to work as router (DHCP+NAT) connection speed slows to 200 mbps.
All this with WiFi off, only iMac (late 2012) connected toTime Capsule with cable.
Any ideas?
Thanks in advance!

200Mbps seems a bit slow for a Gen3.. but it is getting old, and the actual setup of the NAT matters. As well as any degradation of the ethernet which tends to be one of the first things affected on Gen 3.
Actually, I can buy new one, if I were sure it solves the problem.
No it won't fix it.. as I said the new Gen5 TC is worse due to using a slower processor.. and Apple have not turned on hardware NAT. The same chipset used in say Asus achieves much higher results by using a built in speed up in the chip. Apple do not use the broadcom drivers because they use NETBSD firmware whereas everybody else uses Linux.
And in bridge mode I have full speed, in specs there say: "One Gigabit Ethernet WAN port for connecting a DSL or cable modem"
The fact that it has gigabit WAN is what is allowing you to get 200Mbps and not 90Mbps which is about the limit of 100mbit ethernet. But that is irrelevant to the speed reduction you get.. which is caused by the slowness of NAT processing. A router needs a very powerful processor to handle 1GB connection. Like a build your own PC with at least 3ghz i5 and maybe i7 running PFSense or similar router OS.
See http://www.pfsense.org/index.php@option=com_content&task=view&id=52&Itemid=47.ht ml
To simply get over 500Mbps throughput you need 3ghz processor. The TC is not even in the ballpark.
Without hardware speedup, the processor has to inspect every packet for NAT connection information at the very least.. if there is anything else happening in the router, QoS, Firewall etc they all make higher demands of the processor.. Apple routers of course don't have any of those things.. but you are still forced to handle the outgoing stream which might be half the speed of the incoming. Albeit much smaller packets.
See the WAN to LAN tables here.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/74-wan-to-lan
You can see the tests for Airport Extreme which are the same as the TC. The Gen 4 is equal to the Gen5 AE.. and it achieved 430Mbps..The Gen4 AE which is equivalent to your Gen3 TC achieved 420, so, slightly less. The new AC version has a slower processor only managed 325Mbps.
The speed with the TC in bridge is fine.. it is then a switch... no router load at all.

Slow internet with Time Capsule

I just bought a 4th generation Time Capsule to replace my Airport extreme.
With the Time Capsule my internet speed has drobbed to less them .60 mps.
When I reattach my Airport extreme I get 6 mps
I am using the lastest firmware (7.6.1) I have checked all of my setting and so has Apple.
Apple has replaced the Time Capsule 2 times, but the 3rd one still has the same problem.
When connect the DSL Modem directly to the computer or the old airport extreme everything is fine.
Apple is now saying that maybe it's my dsl modem, but AT&T says everything is fine and I am running the lastest firmware on the dsl modem.
I am running system 10.8.2 on an iMac and MacBokk Pro with Retina... Also a couple of iPads
Anyone else had this problem? Solution? Ideas?
Thanks.. Jim

Very interesting.. and Apple have not even really tried to troubleshoot this.
What model is the old airport extreme? Give me the A1xxx from the foot.
A screen shot of the setup would be very useful.. particularly the wireless.
Is the modem in bridge?
Can you bridge it and try with the TC doing pppoe?
Or do you have the modem running as router and the AEBS /TC in bridge?
When you run the TC what is the wireless link speed?
What about speed sharing a file in the local network?
I suspect your problem maybe the WAN to LAN throughput which has been reported in some cases as being an issue.. with no resolution.. the bug does not hit everyone so it could be just the combo of that particular dsl modem and TC that is part of the issue.

How can I play MP3 files with time capsule on a stereo set?

Hello,
Can anyone offer ideas/suggestions how to play my mp3 files (itunes) from a Time Capsule device? I use a plain Philip 5.1dts set. I would like to be able to select music with either my iphone, ipad ir macbook.
thanks, Anton

You will need to add an Apple - AirPort Express to be able to stream your iTunes data to your amp/speaker setup.

How do I use my iPad with time capsule

I would like to download and upload from my iPad to my new timecapsule?
However, I can only access the wireless and settings by using the airport utility...
Please help

You might want to take a look at an App like FileBrowser for the iPad to do what you want with the Time Capsule.
App Store - FileBrowser - Access files on remote computers

How do I control my airport extremes/time capsules w/airport utility over the internet without mobile me? iCloud has disabled this function.

How do I use airport utillity with Time Capsule(or any airport extreme) over the internet without mobile me? iCloud has disabled this function. The mac's that I have not upgraded to icloud still see my routers over the internet with mobile me enabled. Are these routers obsolete now or will there be a firmware update to use icloud?

i want to do the same. i tried entering my @me.com account and does not work, but if I tried to go to icloud.com and using my @me.com works
why?
does the Airport express needs to be upgraded as well

How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.

My MacBook Po can not connet with Time Capsule for Internet. Back-up are ok

Hi to all,
If I connect the ADSL line to Time Capsule no Internett available.
If connect the live with eternet cable to MacBook pro all is fine.
Mack book pro do all the backup with Time Capsule in WiFi
Hot to have the MacBook connectid to Time Capsule in WiFe for internet too??
Easy explanation please, I'm really beginner

Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How?

I have a time capsule and two air port expresses. The time capsule is in the middle of my house, the expresses equidistant in opposite directions. I would like the expresses to both connect directly to the capsule, but they are connected in serial. How to reconfigure.
I ask because I have music running out of both expresses, and the one that is most distant from the time capsule (routed through the first express) regularly drops the music signal from itunes. And I am guessing the serial configuration of the routers has something to do with this, but my root problem is music dropout - any thoughts would be appreciated.

If you have the the most current model of the Express devices, the default setup is to "extend" the wireless signal. In this type of setup, each Express communicates directly to the Time Capsule.
How did you setup the AirPort Express devices?
What version of the Mac operating system are you using on your MacBook? Or, do you have AirPort Utility installed on your iPad?

How to forward ports using Airport Extreme?

So,
I wanna forward some ports but every guide I find on the internet describes how to use the Airport Admin Utilty to do this. The problem is though that I can't configure my AE using AIrport Admin Utility; I need to use my Airport Utility instead. The only problem is that I don't know how to forward ports using Airport Utility.
Anyone?

In AirPort Utility, Port Forwarding is called Port Mapping which is under the Advanced->Port Mapping tab.

How to forward port to internet with Time Capsule

Similar Messages

Maybe you are looking for