How to free rotate an area that has been measured using the measurement tool.

I've measured and area using the measurement tool on one pdf drawing and now want to copy and paste it in to another pdf drawing and rotate it in to position. Is this possible?

Object>Expand Appearance. Then proceed to Ungroup, release clipping paths, etc., to further dissect it. Exact steps will depend upon the specific artwork.
JET

Similar Messages

  • How can i copy a picture that has been installed with the flash player

    how can i copy a picture that has been installed using the flash player

    You can't. You can take a screen cap of it, but the container doesn't allow access to the individual images used in a SWF or FLV.

  • How do i recover a document that has been "emptied" from the trash?

    I "emptied" my trash, which contained the word document of a file and unfortunately now all i have is the PDF version and I don't want to recreate the entire document.  Any solutions to bring it back? I saw them do it on CSI one time!

    With absolutely no guarantees you may find data retrieval software that may allow you to get the document back.  You would have to stop using your MBP imediatly so that the document is not overwritten (which it already may be).  No freebies in this department.
    If this is worth big bucks to you, you can employ a data recovery firm that also with no guarantees may be able to recover it.
    Time Machine alleviates all such problems.
    Ciao.

  • How can you find an ipod that has been lost

    how can you find an ipod that has been lost and the icloud is not turned on

    lost/stolen                                      
    No app is required.                                               
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    iCloud: Find My iPhone
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • I'm moving an internal hard drive from an old computer to a new computer.  How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

    I'm moving an internal hard drive from an old computer to a new computer.  (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?  Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

    The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
    The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
    The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
    It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
    If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
    Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

  • HT1212 how do u restore an iPod that has been disabled and has never been connected to the computer

    How do i restore an ipod that has been disabled and has never been conected to itunes

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Hi I would like to know how I can view a video that has been send via mail. When I tap on the video it only gives me the option to send iit as mail again

    Hi  I would like to know how I can view a video that has been send to me via email. When I tap on the video icon it only gives me option to send as a mail or to open in drop box which I don't want to open in.

    Welcome to the Apple community.
    If you are doing this from your phone (as you mention) then you can use the new iPhoto Photo Journal feature to do this.
    Unfortunately, iCloud does not offer equivalents to Mobile Me’s iDisk, Gallery or Web Hosting services. You will need to find a third party solution to replace these services. You might consider DropBox, SugarSync, MediaFire or any other service that offers online storage.

  • HoW do I save a recording that has been sent to me via text message? Thanks

    HoW do I save a recording that has been sent to me via text message? Thanks

    You will need a document storage, player, or manager to save the file (DropBox, File Manager, Box, VLC, MoliPlayer for example).
    To actually save the file, with it open in iMessage, tap the file icon (lower left) and select the app to save it in.

  • I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    In the Mac side of things, backups usually come in two flavors: clones or incrementals.
    A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
    Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
    As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
    Holler if you need specifics on how to do each. This was just an executive summary.

  • Identify USAGE TYPE that has been installed in the system

    Hi All,
    I have a newly upgraded BI system. I need to check what are all the USAGE types that has been installed in the system. How to verify the same (without asking the basis person). Is there any system parameter or transaction which would give the usage type installed.
    Points would be assigned for useful answers.
    Thanks,
    Vidhya.A

    Hi Vidhya,
    In BI the designtime and runtime of webtemplates use BI-JAVA usuage type.similarly for Formatted reporting too it uses BI-JAVA.see if you can successfully create a new webtemplate and can execute it,if you can then they had deployed dual stack in ur system.u can also check in Tcode SICF to see if web services are on.let me know if that helps
    Regards
    Chandru

  • For iOS the ipad version shows the folio that has been published, but the iPhone app is not.

    I am responsible for handling the apps and not at all involved with or know how the folio creation process works.
    When I build the app for iOS the iPad version shows the folio that has been published, but the iPhone app is not showing the folio.
    Is this something related to the build process or how the folio was created?
    The folio also shows up in the Android app (at least the phone I have tested with).
    Thanks,

    "Android and iOS viewers have different requirements for displaying folios. Any folio size you create can appear in an Android viewer. The articles are scaled and letterboxed as needed. However, on the iPad, the viewer displays only folios with a 4:3 aspect ratio. The iPhone viewer displays only folios with a 3:2 or 16:9 (1136x640) aspect ratio."
    Here is the entire post if you'd like to read more: Digital Publishing Suite Help | Creating documents for multiple devices

  • I have an iPad that was setup on a laptop that has been reimaged.  The iPad then had a password put on it and my kid doesn't rememer the password.  Since I don't have the original laptop with iTunes installed I cannot reset the iPad to the factory default

    I have an iPad that was setup on a laptop that has been reimaged.  The iPad then had a password put on it and my kid who doesn't rememer the password.  Since I don't have the original laptop with iTunes installed I cannot reset the iPad to the factory default.  Any suggestions on how to reset to the iPad?
    Thank you

    Try recovery mode. I think this should work. You can read the instructions here.
    http://support.apple.com/kb/ht4097

  • Error : Period dimension 'Period' is missing a Base Time Period member 'Jun' that has been deleted since the last deployment. Base Time Period members cannot be deleted once the dimension is deployed

    HI,
    I am using V11.1.2.2 Hyperion Planning. I am currently getting an error:
    Error : Period dimension 'Period' is missing a Base Time Period member 'Jun' that has been deleted since the last deployment. Base Time Period members cannot be deleted once the dimension is deployed
    This is what i got when i tried to add alternate hierarchy to my shared dimension. I tried to delete it and it messed up.
    NOw it wont deploy my application.
    Can any one suggest.
    Thanks in advance
    Cheers,
    XXX

    EPMA!!!!! EPMA!!!!
    I'm playing around with it to write a blog post and it is crazy. Only possible workaround (till now i'm not able to figure out a solution to it) is to copy the application and deploy it as a new one. Take copy of all objects (forms, tasklist etc). Delete the corrupted application and rename the new one to old.
    Regards
    Celvin
    http://www.orahyplabs.com

  • I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message!

    I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message and the computer wont restart!

    What is a error message and what do you see when it appears?
    Haven't much problem with Airs around here, since they have a SSD they tend to be more reliable.
    Perhaps it was a bad update, have you ran through this list of possible fixes?
    Do as many as possible, starting with #1. Until the problem is resolved.
    Use the boot 10.6 USB instead of the disk of course.
    Step by Step to fix your Mac

  • Is there a way to get an app that has been deleted from the app store?

    Is there a way to get an app that has been deleted from the app store?

    Not unless the developer/Apple offer it again in the App store.  You can only get apps from the App store.

Maybe you are looking for

  • Service PO

    I have a case where the user makes a contract with a vendor for 2 yrs, and pays him on a quarterly basis. I can create a standard PO for the entire amount at the beginning. Then, as and when bills are paid to the vendor, create PO matching invoices a

  • Default vendor not appearing in freight condition type ZVCF

    Hi All, After going all the forums I am posting this issue.I have mainatined condition record for the frieght vendor with key combition of vendor, customer(Zfield) and material. I have mainatined partner functions for VN with GS partner type. When I

  • ITunes will not close

    Hi I have iTunes for Windows and I have a problem. Every time I try to close it it says "One or more applications are using the iTunes scripting service". I press quit and a couple moments later it opens again!!! Please help me!!!

  • SHDO - add column in table control in CRMD_ORDER

    Hi, is it possible to add a EEWB generated column to table control (on the first screen) in TCODE CRMD_ORDER ? did anyone ever do that ? thank you, Regards, michal

  • Logical Table source problem - Agg Tables

    Hello, I need to know is there any possibility to make following scenario. - A "SalesAmount" column in the presentation layer. - Two aggregate tables; one of them is aggregation according to months and one of them is aggregation according to years. I