How to freeze stacked window vertically ?

Hi all,
I have a stacked windows with many column scroll vertically and horizontally. It is any way to freeze certain column on title and keep on scroll to the right hand size of the screen for some others column ? The freeze on vertical panel will work alike Mircosoft Excel and whether possible doing the same in form 6i ?
Please advise.
Thanks.
Lim

Hi in addition to what manu has already written. ensure that your canvas Viewport properties have
been set correctly.
For example the static canvas
Functional
Raise on Entry: Yes
Viewport
Viewport X Position: 5
Viewport Y Position: 5
Viewport Width: 12
Viewport Height: 8
The properties for the scrolling canvas
Functional
Raise on Entry: Yes
Viewport
Viewport X Position: 17
Viewport Y Position: 4
Viewport Width: 57
Viewport Height: 9
Physical
Show Horizontal Scroll Bar: Yes

Similar Messages

  • How do I close the vertical bookmarks listing that is in my browsing window?

    How do I close the vertical bookmarks listing that is in my browsing window?

    Hi,
    Looks like the Bookmarks Sidebar is currently open in your Firefox.
    There are 2 ways of closing it:
    #There should be a small X mark on the right side of this vertical listing. Just click it and the Sidebar will close.
    #Or, you can click on the View menu, select Sidebar, and then select Bookmarks. The Bookmarks sidebar will now close.
    Hope this helps.

  • How to re-size the window vertically so it takes up the other half of the screen?

    This is the third time I have asked this question?  First time on this site.  I am learning how to write HTML through a college assignment.  I do not know how to resize the window so it takes up 1/2 of the screen (vertically)

    Javascript and then mess with these values to achieve the results you want.
    javascript:self.moveTo(100,100);self.resizeTo(1600,1000);
    javascript:self.moveTo(0,0);self.resizeTo(screen.availWidth,screen.availHeight);
    Likely the bottom one will work, just change "screen.availWidth" to half your screen pixel width.
    javascript:self.moveTo(0,0);self.resizeTo(960,screen.availHeight);
    Then paste into your Safari address bar, then click and drag the small left icon to your toolbar and when it asks to rename, rename it accordingly.
    Now all you have to do is click the button it makes and your screen adjusts.

  • Using numbers 2.3 how do i split windows to view more than 1 spreadsheet at a time?

    using numbers 2.3 how do i split windows to view more than 1 spreadsheet at a time?

    Hi seth,
    Numbers vocabulary:
    Spreadsheets (aka: Document)
    contain one or more Sheets
    on each of which may be placed one or more Tables
    each of which contains one or more cells
    each of which may contain either data or a formula.
    Spreadsheets open in separate windows. Depending on the contents of each spreadsheet, and the scale at which you want to see it (and the size of your display), you can view more than one spreadsheet in the same manner as you can view more than one of any kind of document—open two documents in separate windows. Resize the windows to allow both to be viewed at the same time. Place and scale the individual documents to permit viewing the desired part of each
    Sheets within the same document cannot be displayed simultaneously. You can make and open a copy of the document, then open and view both copies as described above, but this introduces new opportunities to edit the wrong copy. You could Copy a Table from one part of the document, open Preview and go File > New from Clipboard to create a PDF copy of that table (readable, but not editable), and view the spreadsheet and pdf documents as described above.
    Tables can be rearranged, or have rows or columns (or both) hidden to permit simultaneous viewing of selected parts of both.
    A Table can have Table > Freeze Header Rows and Table > Freeze Header Columns set to keep these rows/columns visible as the rest of the table is scrolled. Or can have a range of rows (or columns) hidden to allow viewing of rows (columns) adjacent to that range visible on the same screen.
    Numbers does not support freezing of rows or columns other than Header rows and Header Columns.
    Regards,
    Barry

  • How do you stack different photos in the editor layers pallet

    How do you stack different photos in the editor layers pallet? I can get different photos in the editor, but I cannot figure out how to get different photos into the layers pallet at the same time.  Please help!!!!!

    Just to clarify, you can never see the layers panel for more than one photo at a time. The suggestions you got will show all the photos, but because they are now combined as layers in one image.
    If you want to see more photos in the editor at once, go to the preferences>general and turn on Allow Floating Documents, then go to Window>Images>Float all in windows, then Cascade or Tile.
    But you will still only see the layers panel for the image that is active at the moment.

  • How to create stacked canvas

    How to create stacked canvas on a content canvas in forms builder.
    Please let me know if anybody has some steps or screenshots.

    once you build a content canvass your next step is to create another canvass with a property canvas type of stacked. those two canvas the content and stacked should have the same property of raise on entry yes and should be on the sane window.
    to force to display the stacked canvass at runtime on your Form level trigger WHEN-NEW-FORM-INSTANCE add this code
          show_view('stacked_canvass');where the stacked_canvass is the name your stacked canvass. hope this helps.

  • How can I widen the vertical scroll bar width in Firefox and Thunderbird?

    How can I widen the vertical scroll bar width in Firefox and Thunderbird?

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • How do I install windows from USB on Macbook pro 3,1

    How do I install windows from USB on Macbook pro 3,1 ?
    My Superdrive is far from super anymore, So I managed to make an extern drive with both Snow Leopard Partition, Lion Partition (Since I thought Boot Camp 4,1 would bypass my problem), and Time Machine partition, Since I got 1. USB drive that works.
    - My general issue is that Boot camp Refuse to see the USB drive - (Many "how to"´s though show how they install windows perfectly through the USB port, but they use airbooks!, and somehow the Macbook will not ?)
    I fix that issue with >> rEFIt <<, that suddenly makes it possible for the Mac to see the USB drive, and partitions.
    Which was very strange since I could use an extern HD with the whole installation to start up wipe the whole disk, and then use my extern drive with partitions to install Snow Leopard and get everything as before with timemachine. Very smart with timemachine, but very lucky that I have a extern drive that runs the whole system and that I made the partitionsdrive before. DVD-drives are the past!
    Point: So the original system could see the Snow Leopard installation USB disk, but boot camp cannot find the USB drive ?????????
    After rEFIt I booted and then I got this error:
    Starting bootmgr.efi
    Error: Unsupported while loading bootmgr.efi
    I read it could be a problem with the Windows software, so I purchased an extern DVD drive, Used Disk Utility to make an image (.DMG), then used another program to convert the .dmg to .ISO.
    Then downloaded a trialversion of vmWare fusion, and installed windows from the iso. Everything worked brilliant, except and that is why I want to use boot camp, Running windows in another program while running the mac system is a little hacky and slow.
    Point: Nothing is wrong with the windows software, and windows runs fine.
    I then downloaded the Windows DVD / USB Tool, reformatted a USB drive as Master Boot Partition, MS-Dos Fat partition, then after lots of struggling got Vmware, windows to recognise the USB drive. And installed the windows software on the USB drive, as all the walkthroughs recommend.
    Then I tried for "fun"! to just install windows form the extern USB drive, and with rEFIt it will see the drive and start to do something, but then when it starts to boot, the screen just turns into black and nothing happens, and you can see the drive does NOTHING. (I think it is because I only have 1 USB drive and the Extern DVD drive does not get enough power, but again the mac refuse to see the USB drive unless it is a Snow Leopard installation USB-drive!
    Well trying to install Windows Ultimate 64 Bit, which worked great in vmware, because that program installed from the .ISO file that I had on the desktop, but trying with Boot Camp did not get anywhere, what kind of **** program is this boot camp anyway!?, but then I try the new USB disk with windows made from windows, thorugh rEFIt, it sees the disk and then starts and then I get this ERROR:
    rEFIt - Booting Legacy OS
    Starting legacy loader
    Using load option ´USB´
    Error: Not found returned from legacy loader
    Error: Not found from LocateDevicePath
    (x 9 times)
    Error: Load Error while (re)opening our installation volume
    The firmware refused to boot from the selected volume. Note that external hard drives are not well-supported by Apple´s firmware for legacy OS booting
    (Hey Apple please send out a updated firmware that fix this issue?!)
    So how do I do it ? - or is the only option to fix the partition running the system from the extern disk. Format the whole drive in 2 from the "bottom" and install windows and then afterwards install Mac on the other partition ?  Or just run windows on the mac and forget about mac software ? What a stupid solution...

    There are strings in the pliist file to add other Macs so that you can use some USB-DVD drives.
    This is 5 page thread, so a little more 'meat' to it:
    https://discussions.apple.com/thread/3410900?start=60&tstart=0
    And on PC booting Windows from a USB DVD to do the install is usually a piece of cake, sometimes you just need to specify that USB in the BIOS boot order and sometimes select via F12 (or another Fkey) and that is it.
    What you have here seems to be everything and everyone is excluded unless there is a  mac-model device ID string that specifies yes.  An unnecessary hurdle.

  • HT1349 mini graphics to vga adapter for macbook how to install in windows 7.

    mini graphics to vga adapter for macbook how to install in windows 7.
    i have macbook with windows 7 operating system.

    Can you be more specific?
    What are you trying to do?

  • How can I install Windows 8.1 Enterprise on my Macbook Pro  With BootCamp?

    How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

    Hi Armin.S,
    I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
    Boot Camp: System requirements for Microsoft Windows operating systems
    http://support.apple.com/kb/HT5634
    Mac Basics: Using Windows on your Mac with Boot Camp
    http://support.apple.com/kb/HT1461
    Apple - Boot Camp Support
    https://www.apple.com/support/bootcamp/
    Regards,
    - Brenden

  • How do i install windows 8 on a late 2012 mac pro?, how do i install windows 8 on a late 2012 mac pro?

    how do i install windows 8 on a late 2012 mac pro?

    Follow the directions here http://www.apple.com/support/bootcamp/

  • How do I install windows 7 drivers correctly on my macbook pro retina?

    I've installed Windows 7 Ultimate (64 bit) twice now, and each time I get on, none of the bootcamp drivers seem to be installed correctly.  This means I can't access the internet because a network adapter isn't present, and I can't play games because the NVIDIA drivers aren't there.  I've seen other people have had this problem in the past, but their fix was to download bootcamp 3.x from Apple's download site, but obviously that doesn't work now as the version is newer.
    Does anyone know how to correctly install Windows so this doesn't happen, or how to get the drivers installed correctly?
    Thank you very much for your time

    For 2 reasons, and they are about the hardware.
    1) Apple/Mac and BC restrict the way you use the computer. Maybe not for you but for me. It does not allow you to create any other parttitions for Windows to use. You can't even re-partition the BC partition into 2 drives. That will HOSE the Windows system and maybe the OS X part.
    2) Apple/Mac does not allow the use of all the hardware. You can not use both graphic cards. switch between them. Windows Must use the descrete graphics adapter which cause the system to run hotter. This is a limitation imposed by Apple as with Reall Windows PCs that have both the Interl embedded and add-on descrete graphics you can switch between them.
    Actually BC 4 has been out since Lion shipped on new Mac's. BC 4 also restricted the installation of Windows to just Win 7, no more XP. Which was what you could do with Snow Leopard and BC 3
    Message was edited by: Shootist007

  • How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?

    How do I install windows 7 on a macbook pro mid 2009 using bootcamp and no optical drive?
    My optical drive is non-functional and I want to dual boot with win7. The only problem is my macbook does not boot from USB at all, even when I hold th ALT key down when it is starting up.
         -I have a flashdrive with win7 on it.
         -I mounted the ISO of win7 with toast for bootcamp to do its thing.

    Good luck.
    Consider this a bump so that hopefully someone with better news spots your thread.
    Allan

  • How can i install windows games in my macbook pro

    I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

    As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
    As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

  • How to open new window and generate oracle report from apex

    Hi,
    I had created an application that generates PDF files using Oracle Reports, following this Guide.
    http://www.oracle.com/technology/products/database/application_express/howtos/howto_integrate_oracle_reports.html
    And I followed 'Advanced Technique', so that users can't generate PDF file by changing URL and parameters. This is done for security reasons.
    But in this tutorial, when 'Go' button is pressed, the PDF file is displayed on the same window of apex application. If so, user might close the window by mistake. In order to avoid this, another window have to be opened.
    So, I put this code in the BRANCH - URL Target. (Note that this is not in Optional URL Redirect in the button property, but the branch which is called by the button.)
    javascript:popupURL('&REPORTS_URL.quotation&P2100_REP_JOB_ID.')
    But if the button is pressed, I get this error.
    ERR-1777: Page 2100 provided no page to branch to. Please report this error to your application administrator.
    Restart Application
    If I put the code 'javascritpt ....' in the Optional URL Redirect, another window opens successfully, but the Process to generate report job is not executed.
    Does anyone know how to open new window from the Branch in this case?

    G'day Shohei,
    Try putting your javascript into your plsql process using the htp.p(); procedure.
    For example, something along these lines should do it:
    BEGIN
    -- Your other process code goes here...
    htp.p('<script type="javascript/text">');
    htp.p('popupURL("&REPORTS_URL.quotation&P2100_REP_JOB_ID.")');
    htp.p('</script>');
    END;
    What happens is the javascript is browser based whereas your plsql process is server based and so if you put the javascript into your button item Optional URL Redirect it is executed prior to getting to the page plsql process and therefore it will never execute the process. When you have it in your branch which normally follows the processes, control has been handed to the server and the javascript cannot be executed and so your page throws the error "Page 2100 provided no page to branch to"... By "seeding" the plsql process with the embedded javascript in the htp.p() procedure you can achieve the desired result. You could also have it as a separate process also as long as it is sequenced correctly to follow your other process.
    HTH
    Cheers,
    Mike

Maybe you are looking for