How to fully disable Journals in BPC

Once Journals are enabled in an app, how can they be disabled fully so new dimensions can be added? I already changed the flag in the tblApp table, but more is needed.

Sorin,
I did another test and I think you are right that only tblapp needs to be changed, but with a re-logon of the administration console. After changing the tblapp table I did not re-logon and I got the error that the journals where enabled. But after closing the admin console and a new logon it is also working without removing the jrn tables :). So it seems to cache the journal setting of tblapp on the client or something...
Regards,
Joost

Similar Messages

How do I disable journaling on an external drive that won't mount?

I'm trying to fix a hard drive that gives me the "Invalid content in journal" error. I've run the latest TechTool and Drive Genius and they say the drive is fine, except for its crippling inability to actually mount. Onyx and Cocktail won't touch it until its mounted. Ideas?

It's possible to recover files using recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

HOW DO I: disable journaling? make an alias of my user folder? Where is AHT

...on the retail discs?
1. UNCHECKED during install, yet like the last three X's, the install disc installs Journaling anyway.
Xupport could do this, but is now "incompatable" with 10.5
2. Tells me I dont have permission
3 Be darned if I can find it-used to restart and hold down "D"

Apple Hardware Test is on a disc that came with the computer, not on the Leopard (or any other OSX) retail disc. The hardware test does not depend on the operating system on the hard drive, so does not need to be updated for newer operating systems.

How do I fully disable or reset Time Machine

Hello all,
Up to recently I had no problems using Time Machine with my Synology 207+ (DSM 2.3) with 10.6.8.
I updated my Synology firmware in order to upgrade to Lion. After a few days, Time Machine decided to start a fresh backup, never did figure out why.
Unfortunately I have not been able to finish a backup in one go so to speak. Sometimes I get 10 GB copied before Time Machine fails. Next time around
I get a bit more copied, this continues until I apparently have a full backup. BUT Time Machine is either unable to use the backup or wants to start over again.
To me it seems that my machine has two TimeMachines running, mainly because during a backup something aborts the current backup to unattach the mount.
I have tried to disable backups from the TimeMachine preferences, but to no avail - the still startup regular as clockwork.
So is there a way to either fully disable TimeMachine or alternatively reset it so I can try to start from scratch.
All this has left me without a backup for close to 2-weeks now, and made me look into other backup possibilities.
I hope someone can shred some light on what my issues are.
Thanks in advance.
Best regards
/Ib

Thanks for your reply.
I did try to rempve the files you mentioned, plus a few others. And TimeMachine did start up from scratch.
Unfortunately I still get the same type of errors as before, like.
Nov 26 15:12:16 Idun com.apple.backupd[2502]: QUICKCHECK ONLY; FILESYSTEM CLEAN
Nov 26 15:12:32 Idun com.apple.backupd[2502]: Disk image /Volumes/TimeMachine/Idun.sparsebundle mounted at: /Volumes/Time Machine Backups
Nov 26 15:12:32 Idun com.apple.backupd[2502]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Nov 26 15:13:16 Idun com.apple.backupd[2502]: Stopping backupd to allow ejection of backup destination disk!
Nov 26 15:13:16 Idun com.apple.backupd[2502]: Error writing to backup log. NSFileHandleOperationException:*** -[NSConcreteFileHandle writeData:]: Result too large
I have a load of errors, the above is just an example.
So I guess I just have to accept that the combination of SW on my Mac and my Synology are incompatible :-(
/Ib

How do I disable all non-essential components in the CS6 installer

A new question in the spirit of http://forums.adobe.com/thread/548877 and http://forums.adobe.com/message/2778575, where I asked this question for CS4 and CS5 and eventually discovered how to do this (at least for CS4; CS5 was a mess...): How do I disable all the non-essential components in the Photoshop CS6 installer?
I already found the payloads/Media_db.db sqlite 3 database and wiped the DependencyData table. This goes a long way - unlike CS5, which was a maze of hidden xml configs and sqlite databases, for CS6 just wiping this single table will give the user full control over what the installer will put in the computer. With the dependencies wiped, we can now see all the stuff it's actually going to install:
Bridge (normal and x64) - 187 and 262 MB
CMaps (normal and x64) - 7.2 and 7.2 MB
CSXS Extensions - 1.3MB
CSXS Infrastructure - 6.8MB
Color - photoshop, EU, JA, NA - 1.5, 2.1, 3.0, 2.5MB
Video profiles - 4.7KB
Dynamic Link Media Server - 96MB
DynamicLink Support - 6.1MB
ExtendScript Toolkit - 19MB
Extension Manageer - 16MB
Fonts recommended (normal and x64) - 110 and 110MB (why are there x86 and x64 versions? more of an open question than one that really needs an answer, but this is not how fonts work. There are no separate x86 and x64 flavoured OpenType fonts)
Fonts required (normal and x64) - 123 and 123MB
Hunspell Linguistics Plugin (normal and x64) - 181 and 181MB
Linguistics (normal and x64) - 46 and 46MB
Mini Bridge (normal and x64) - 4.0MB
PDF Library Files (normal and x64) - 75 and 75MB
Photoshop (normal and x64) - 486 and 563MB
Photoshop Support - 9.4MB
Player for Embedding 3.3 (normal and x64) - 21 and 26MB
Switchboard 2.0 - 1.1MB
Type Support (normal and x64) - 6 and 6MB
Winsoft Linguistics Plugin (normal and x64) - 8.2 and 8.5MB
XMP Panels - 4.9MB
ColorCommonSetCMYK - 13MB
ColorCommonSetRGB - 8.6KB
Camera Profiles Installer - 285MB
MSVC++2005 redist. (normal and x64) - 11 and 11MB
MSVC++2008 redist. (normal and x64) - 11 and 11MB
MSVC++2010 redist. (normal and x64) - 11 and 11MB
MSVC80_CRT (normal and x64) - 0.0 and 0.0KB
PDF Settings - 2.4MB
Camera Raw 7 (normal and x64) - 22 and 24MB
Suite Shared Configuration - 3.2MB
Some of these things we really want installed (Photoshop, CMaps, XMP panels, Type Support and required fonts and color profiles are pretty much the minimal set required for a functional Photoshop installation), but some of these things really have no right to be silentedly installed. There's a good gigabyte of nonsense that someone who just wants Photoshop has no need for. Denying them the option to unselect these things during installation is a bit evil (whatever happened to the 'advanced' or 'custom' installation option? That was a good option).
That said, there's still something funky going on - unselecting all components indicates that the installation will required 0.0KB on disk. However, selecting Photoshop CS6 x64, which indicates its size is 563MB, results in an installation that requires 677MB on disk. Similar things happen for other components; CMaps is 7.2MB, but when you select it, it suddenly requires 121MB on disk.
Much last last time, I fully appreciate the install team's choices in making sure the installer will always work as long as people don't tamper with it, but I'm not one of those people - I do tamper with it, because I want to control exactly what lands on my disk. So: how do I find out what these secret things are that are not listed after wiping the dependency data so that I can explicitly pick individual components? Which additional steps are required to reveal the hidden dependencies that will apparently still be installed, or aren't factored into the size indication for the various components? And finally, how do I make the installer NOT determine that "this is not a genuine installer, you may have a counterfeit product" =)
I know it's been altered; I modified it, because I think your install process is trying to force stuff onto my computer that I never asked for, nor will ever use (I know they're quality products, they just have no right to exist on my computers. If I had the choice to say no, I'd acknowledge them as quality products instead).
- Mike Kamermans
nihongoresources.com
NB: if Eric Wilde ends up replying to this post: I still remember your willingness to help figure this out for CS5, two years ago. Thank you again for that.

I can see why you wouldn't want to release information that lets people set up arbitrary installers, but that's why I mostly wanted those two specific hashes. The installer team can just generate them without ever saying how, and we will only be able to use them to validate the installer for the modification that lets you pick components. This should in no way interfere with the desire to prevent dangerous installers making it into the wild; in fact, it kind of guarantees that's impossible.
I know you can't guarantee it'll work or test it, and that's fine. Past experience has shown that CS3, CS4 and CS5 work fine with updates (and most updates don't apply to Photoshop, they apply to the additional components that I traditionally don't install), so I'm pretty sure it'll work fine with CS6 too, although of course it could go wrong in which case I can always fall back to a normal install.
Would you be willing to ask the install team whether they could generate just these two numbers, based on the single SQL command run on Media_db.db from the main payload directory? I can fully understand not wanting to give the "here is how you generate the hashes" information, but generating two specific numbers that don't work for anything but this specific query should be just as safe as the various hashes we can already see for the other Media_db.db files in the various payload directories (so they wouldn't reveal anything not already known about how to reverse engineer the hashing algorithm). It'd help tech-savvy customers quite a bit without playing into the hands of criminally minded jerks (I actually had the pleasure of running into a duped CS3 Extended disc several years ago! I had ordered CS3 for personal use, and mysteriously received a CS3 extended version with a volume licensing key in what looked like an official normal CS3 box. Needless to say, authorities and Adobe were notified).
<<I think the right answer to this issue is to simply remove from the products those items that are not required to execute the product. That's actually something we're aggressively pursuing this summer so that the product size reduces in future releases, particularly for PS.>>
It's not possible to take components out of the payloads directory without the installer complaining that errors have occurred. It really wants all those files there when it starts =(
<<Have you investigated using AAMEE? I don't think that will get rid of all the "extraneous" pieces; but, it does provide some flexibility in creating an install package that can then be pushed out through normal deployment tools (e.g. SCCM).>>
I did, but unfortunately AAMEE requires the use of a volume license key, which I don't have. We only have individual products keys for the machines that will get Photoshop CS6.
- Mike

I have a ipod 5th gen and i changed my password because everyone knew it. I had forgotten it and now it is fully disabled. I can not get it online anymore and i have tried everything to get it restored. Please help as I am really worried

I have a ipod 5th gen and i changed my password because everyone knew it. I had forgotten it and now it is fully disabled. I can not get it online anymore and i have tried everything to get it restored. Please help as I am really worried

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

HT201250 how do I disable time machine? I want to use my external drive as additional storage. But it mirrors everything I edit. If I remove a document, it removes it from the external drive as well.

how do I disable time machine? I want to use my external drive as additional storage. But it mirrors everything I edit. If I remove a document, it removes it from the external drive as well.
I purchased a 1 TB WD passport drive, formatted for Mac. I set it up originally (mistakenly) to backup time machine. I went back and set it to "do not backup" It still backs up evey document I edit. If I add a document when the drive is disconnected, it automatically adds it to the external drive the next time connect to the passport drive. If I remove a document the same thing happens.
I need additional storage to free up space on my laptop hard drive. This is not working the way I want it to. Help!

Do not backup your startup volume to another partition on the same drive. If the drive fails you have nothing. Always backup to another drive or volume on another drive.
The I/O error usually means there's a problem with the drive. Clone ASAP, then repartition and reformat the main drive. Then restore the clone. Here's the basic process:
You will have to backup your OS X partition to an external drive, boot from the external drive, use Disk Utility to repartition and reformat your hard drive back to a single volume, then restore your backup to the internal hard drive.
Get an empty external hard drive and clone your internal drive to the external one.
Boot from the external hard drive.
Erase the internal hard drive.
Restore the external clone to the internal hard drive.
Clone the internal drive to the external drive
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive and click on the downward pointing arrow button.
After startup do the following:
Erase internal hard drive
Open Disk Utility in your Utilities folder.
After DU loads select your internal hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed. Do not quit Disk Utility.
Restore the clone to the internal hard drive
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the internal hard drive. Source means the external startup drive.
Note that the Source and Destination drives are swapped for this last procedure.

How can I disable the advancedAntiAliasing with fontswf in sdk

Hi,
in asc2.0 we need 'fontswf' script to embed fonts instead of use .as file directly.
but here is a problem
I cannt disable the advancedAntiAliasing with fontswf ?
because I have found an issue when I set advancedAntiAliasing is true, then the textfield (which font is embeded) antiAliasType doesn't work even type is advanced. I need set advancedAntiAliasing is false (in asc1.0 you can set it by .as file)
now i just set the sharpness and thickness to workaround in used asc2.0
but i think that is not great.
so how can I disable the advancedAntiAliasing with fontswf or any other solution?
thanks
hbb

Hello -
That setting is not fully supported. You can explicitly call it like this:
./compc -include-sources ../samples/test/Main.as -output ../samples/test/Main.swf -advanced-anti-aliasing=true/false
So, that is the compiler option that you want to use in order to disable it. The example I show you here uses the command line tool but it is a valid switch via Flash Builder as well

Openning a disk file places a lock on it. How can I disable this?

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/867611]]</blockquote>
Opening a local, disk resident HTML file in Firefox places a lock on it. When I try to delete it before closing it in Firefox, I get an "Access denied..." message.
How can I disable such a lock placement?

A couple of other possibilities:
The CD is dirty / damaged / suffering from "CD Rot" - sometimes CDs may seem to play fine on a CD player (or using the CD-player function of a PC) but will not transfer correctly to a computer - this is the result of the way that CD players auto-correct the datastream from the CD where PCs, when reading the audio CD as data, do not.
Enabling the error correction function in iTunes import may alleviate if not fully resolve this
Use an alternate tool to extract the audio from the CD - Exact Audio Copy is probably the best out there, as it can be configured to attempt multiple reads of every audio sample on a CD to get a consistent result. Then import the resulting files into iTunes.
You don't say whether this is specific to one CD as in the original poster's case, but the "crackling" symptom has affected a significant number of users of the 64-bit version of iTunes 12.1.0.71 - these are mostly addressed in the most recent update (12.1.1.4), but if nothing else works it may be worth trying this alternative installer: iTunes 12.1.1 for Windows (64-bit — for older video cards)

How can I disable Firefox from automatically opening on system startup on my Mac - unchecking the "open at login" does not work?

We have Firefox 10.o on our Macbook Pro OS X 10.5.8. I prefer using Firefox as my browser but my husband prefers Safari for now because of a long history of bookmarks and saved information he doesn't have time to re-do. He is tired of Firefox automatically opening when we start up the laptop, and even when we uncheck the "open at login" it still opens at login every time. He is about to uninstall it because of this. How can we disable? It does NOT show up in our account on the Mac OS as an application that starts at login, so we can't disable it there.

For those of you running Windows, I found this on another site. (Unfortunately, not before getting totally disgusted and switching to chrome.)
1. click start (or the windows flag button at the bottom left) 2. in the "search programs and files" or the RUN dialog box, enter "msconfig.exe" or "msconfig". 3. That should open the system configuration program. 4. click the "Startup" tab at the top of the opened program. 5. Under the "startup item" column, look for Mozilla firefox. 6. uncheck that one. 7. Click OK or apply. 8. click "exit without restart". 9. you're good to go.

How can I disable iMessages from archiving messages and attachments?

I noticed while browsing ~/Library\Messages/ that iMessages has been archiving my messages (Archive folder) and saving attachments (in a separate Attachment folder). Under the settings for iMessages on OS X 10.8.2 Mountain Lion, I don't see any options to disable this. The only thing close to that is already unchecked: Save history when conversations are closed.
Any ideas why iMessages is saving all this information? How do I disable it? My concern is that it's going to keep accumulating data overtime. I don't want to keep having to go back in there and delete those two folders constantly.

Hi,
This somewhat date back to the way iChat's Saved Chats were once Stored.
At iChat 5 (in Snow Leopard) you could choose to see the last chat - (when opening an new chat with a person you had chatted with before) or parts of the Last Chat in terms of the Last so many IMs.
Example Pic of iChat 5's Prefs
Since then the management choices of the Save Chats has changed in both iChat 6 and Messages.
Messages stores Chats two ways if they are iMessages.
You can elect to Save them in Messages > Preferences > Messages.
It also store the chat.db and other databases items which includes the Attachment items
The chat.db is the bit that fill in the "history" if you iMessage the same person even if you are not saving the Chat in a formal sense in the App's Preferences.
This is irrespective if your delete the Conversation from the Messages main window.
How big these Databases get obviously depends on your iMessages usage.
Striker's link seems to be about a similar issue on an iPhone (I presume it transfers to other iOS devices) but I am not sure that it is relevant in this situation.
Edit.
I should have been clear that you cannot change the database behaviour.
9:49 pm Sunday; October 6, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

How can I disable imessage from old phone?

how can I disable imessage from old phone number / iphone I no longer have?

iMesssage to old phone
If you move to another phone and forget to turn off iMessage then read “if you no longer have the device in http://support.apple.com/kb/HT5661 If you still cannot resolve it call Apple http://support.apple.com/kb/HE57
To deactivate iMessage http://support.apple.com/kb/ts5185
Read http://m.samsung.com/us/support/SupportOwnersFAQPopup.do?faq_id=FAQ00053450&fm_s eq=62995

How can i disable imessage from automatically starting up when i turn on macbook air?

how can i disable imessage from automatically starting up when i turn on macbook air? i dont know my imessages to pop up on my laptop when it turns on. But i dont want to disable imessage totally on my macbook.

Welcome to the Apple Support Communities
First of all, check that Messages is closed when you turn off your MacBook. This is so important because, by default, OS X will reopen all opened apps the next time you start your Mac.
Apart from that, when you go to  > Shut Down, or  > Restart, in the window you see to restart or turn off your MacBook, unmark "Reopen windows when logging back in". This will avoid that your Mac opens all opened apps the next time you start the MacBook, so Messages won't start automatically at startup

How do you disable voice control on iphone 4

Voice Control doesnt seem to work to create a text message on iphone 4 like it does on the 4S. How do I disable Voice Control all together on a 4?

capsjenwalker wrote:
How do I disable Voice Control all together on a 4?
Sorry, you can't. There is no setting to completely disable such.

How do you disable voice announcements on the Gusto 3 ?

How do you disable Voice Announcements on the Gusto 3 >

Thanks for reaching out to us, tobrien459! May I ask what readouts you are getting in order for me to make sure I provide you with the most accurate information?
I'm thinking you are looking for this:
From the Home screen, press the Left Soft Key
Menu > Settings > Accessibility > Easy Set-up.
2. Follow the screen prompts to choose settings for
Full Readout, Menu Readout, Digit Dial Readout,
Alert Readout, TXT Message Readout, Browser
Readout, and Flip Open & Talk
Let me know if this is what you need.
TamaraH_VZW
Follow us on Twitter @VZWSupport

How to fully disable Journals in BPC

Similar Messages

Maybe you are looking for